Access Control System

We are seeking suppliers for animal identification products with the following requirements: Product 1 - Large Visual Ear Tag: Must fit within the dimensions we provided earlier. Product 2 - RFID Injected Transponder: Maximum size 2.12 × 12.5 mm (smaller sizes are also acceptable). Product 3 - Small Visual Ear Tag: This is a visual-only tag, no RFID chip required. All products must be ICAR-approved. Please include the engraving cost in your quotation. We are currently shortlisting suppliers and plan to finalize factory visit schedules for mid-November.

We are seeking to purchase 5–10 units of the FR-S20 fingerprint access control terminal for engineering evaluation and system integration testing. The device must support TCP/IP (RJ45), RS485, RS232, 125 kHz RFID, 13.56 MHz MIFARE, fingerprint verification, PIN verification, and door lock relay control. We require full SDK documentation, communication protocols, and API references to integrate the hardware with our own software platform, without relying on pre-installed management software. Please provide complete hardware specifications, SDK technical documents, and a sample quotation based on these requirements. Further OEM cooperation and bulk orders will be considered after technical compatibility is confirmed.

We are looking for a manufacturer to supply high-quality semi-automatic tripod turnstiles suitable for harsh, corrosive marine environments. Technical requirements: - Housing and arm material: strictly AISI 316 (Marine Grade) stainless steel with material test certificate - Mechanism: semi-automatic, bi-directional control - Emergency feature: automatic drop-arm on power failure or emergency signal - Durability: MCBF greater than 5 million cycles, with lab test reports if available - Protection rating: IP65, main control board must have conformal coating/tropicalization against high humidity and salt mist - Wiring: pre-wired, waterproof, ready for integration with access control systems (RFID/QR) Please quote unit price, crate dimensions and weight for two units to be delivered to Majunga, Madagascar. Also provide datasheets/catalogues of the matching model and confirmation of CE (EMC & LVD) and RoHS certifications.

I would like to purchase the AC/DC RFID/Keypad Time Attendance & Access Control System. Quantity: 10 units. Please provide your current price.

I am looking to purchase 1 piece of Denso 89740-0R020 car receiver door control for Toyota. Please provide details on price and availability.

We are setting up a medical factory in KAEC, Saudi Arabia for the NUPCO tender NPT0046/24. We need a turnkey supply including: - Infusion set production line (ZY-Y0090, DEHP FREE, LATEX FREE, 4500-4800 sets/hour) - ETO sterilizer (15 m³) with aeration room (20 m³) inside a container - Vision inspection system for leakage testing Required documentation: SFDA compliance with ISO 13485, CE, IQ/OQ/PQ, ISO 10993. Please quote best direct factory price FOB Guangzhou, including installation and 2 weeks of training at our KAEC site. We expect a quotation without platform fees.

I need epoxy necklaces with embedded NFC chips. They will be used for contactless POS scanning, similar to the NFC wristbands my customers currently use. Specifications: - Form: epoxy necklace - Tag size: approximately 21mm x 21mm - Chip type: EV3 4K Please provide product details and quotation.

We are developing an automated highway toll lane system. We need 1 pc CL7206C2 UHF RFID integrated reader with RS-485, Ethernet/RJ45 interfaces, and 9dBi/12dBi circular polarized antenna. Also need 50–100 pcs tamper-proof UHF windshield stickers (Impinj Monza R6 or NXP UCODE chip, anti-removal type for car glass). Please provide sample pricing, datasheet, and API/SDK documentation for Linux integration. Also share MOQ and volume pricing for 50+ readers and 5,000+ tags for mass deployment.

I am looking for 13.56 MHz RFID antennas, specifically 150x200 mm size with SMA connector. Please share product details and pricing.

I am looking for a compatible remote control for my MY-HI 2.5HP 1–8 km/h treadmill. Please advise if you have one available.

I am looking to trial a pair of automatic swing gate openers. I have a double-leaf gate and need a complete kit with 2 motors, control board, and photocells. I plan to place a larger order after successful testing. Please confirm the exact contents of the trial kit.

I am looking for 1,000 pieces of the standard TM01 iButton chip. Please provide pricing and availability. I need the standard version without LED or custom printing.

We require SIM card-size RFID tags for jewellery applications. We are looking for all available types, not only paper tags. Please provide photos, technical datasheets, material and construction details, available dimensions (including the smallest size), RFID frequency and standard, read range, memory capacity, suitable attachment methods for jewellery, and recommended RFID readers, antennas, and compatible software/solutions. Kindly suggest the most suitable RFID tag options for small jewellery items along with complete technical support.

We are evaluating an automated visual inspection system for aluminum parts, specifically for an aluminum cover with a maximum outside diameter of 156 mm and overall height of 40 mm. The inspection must cover the top surface and the entire external circumference. Key defect criteria: point defects such as needle indentations ≥70 µm in diameter, and scratches longer than 70 µm. Surface roughness is Ra 0.8 µm. We require a preliminary technical feasibility assessment and a budgetary quotation. Please specify automatic inspection time and loading/unloading time separately. Manual loading/unloading is acceptable initially. Please provide two supply options: 1. A complete inspection machine with software. 2. A component package for our own assembly and integration (cameras, lenses, lighting, controllers, software, wiring diagrams, and mechanical design recommendations). Include details on SDK/API availability, software licensing terms, and technical support. A simplified cross-sectional sketch with overall dimensions is available for your review. Please base your assessment on the provided information, stating assumptions and conditions to be verified through sample testing.

I need 2 pieces of 1892PS magnetic switch (Interrupteur Magnetique). Please provide details.

I am looking for 300,000 large RFID cattle ear tags in assorted colors. The tags need custom logos and numbers printing. Please provide details including RFID chip type options, pricing, and lead time. Urgent order.

I need an NFC reader with the following features: - GSM 4G SIM slot for cellular connectivity. - Small screen to type and display amounts. - Used for payment acceptance, simply reads NFC cards and calls a backend server. - Communicates via HTTPS API: the device posts a request payload to a designated URL, receives a response, and shows it on the screen. - This is not a traditional POS terminal; it is an NFC reader with SIM and screen for backend-driven transactions. We will start with sample orders to test functionality, and if successful, the quantity can reach thousands. Our budget per unit is approximately $7–$15.

I am looking for RFID PCB Tags sized 40 x 10 x 3mm. The adhesive must be suitable for indirect food contact, as the tags will be applied on steel crates used for food storage. Estimated project demand is up to 200,000 pieces. Please provide technical datasheets, complete product specifications, production lead time, sample availability and cost, and your best EXW unit pricing for 20 samples, 50k, 100k, and 200k pieces.

I am looking for product catalogues for fastlane turnstiles. Please share the relevant catalogue with me.

I am a design manager evaluating a UHF RFID module for potential integration into our mid-range projects. I need a sample unit for testing. Please provide the price for one sample so I can assess its suitability.

We are looking for original INSIDE Contactless PicoPass 2KS chips. Quantity: 1,500 pcs. Please confirm availability and stock form (bare die, module, inlay, or white card). The chips must be authentic, unfused, and in personalizable condition. Provide photos and batch information. We request 5–10 pcs as samples for testing first. Kindly quote EXW or FOB Shenzhen, including unit price, MOQ, and delivery time.

We need to customize a high-quality NFC desktop accessory for the Australian market. The design should be minimalist and textured, made from materials like wood, high-grade plastic, or stone. The NFC reading performance must be reliable so that iPhones and Android phones can detect the tag through the finished surface without issues. The product will embed a batteryless NFC tag, such as NTAG215 or an equivalent option you recommend. We require full customization of shape, dimensions, material, surface finish, logo, and packaging. The accessory will work with our mobile focus app, which we handle in-house—no software development is needed from you. We prefer to adapt your existing products, molds, or processes to reduce tooling and development costs. We'll start with sampling and then proceed to small-batch production. Please share your closest examples, recommended material and NFC solutions, minimum order quantity, sample fees, bulk pricing, and estimated lead time.