Contact Platform Support
Help CenterDetection Before Cooling Bed Hot Metal Detector
Related Products
Detection before Cooling Bed Hot Metal Detector
Characteristic
• Fully digital “All-in-One” Design
• LED Bar Display of % IR input signal
• Programmable temperature threshold from 270°C
• Operates from 80-240VAC or 24VDC Supply
• Programmable response times from 1ms to 250ms
• Control Relay and Fast Reed Relay Outputs
• NPN and PNP Transistor Outputs
• Remote Self-Check Facility
• Unique combined air purge and coolant facility
• Optional Water Coolant Radiator & Separate Air Purge
Rear Bar Display
The rear bar display allows the user to clearly establish the amount of received IR both from the background metalwork and the bar being detected and thereby establishing the correct trip level required. This display also allows the user to align the Detector from a low energy source such as a flashlight, which normally would be insufficient to switch the Detector. Adjustment of both the threshold and the response time is also clearly defined by this bar.
Additional Information
To accommodate variation in bar temperature and background IR, various precise threshold are programmable via covered switches from 270°C to ensure reliable switching with reference to both the displayed background and product IR signal.
Furthermore, response time is programmable from 1 ms to 250ms to accommodate black spots on the hot material.
The MSE-HMD85 Hot Metal Detector incorporates a remote self-check facility remotely energized by closed contacts that lights up an internal IR LED to switch the Detector and verify its’ outputs operate correctly.
The MSE-HMD85 Hot Metal Detector will operate with 80-240 VAC/50-60Hz or 24 VDC power input. Standard outputs include a cradle relay, a fast reed relay and both NPN/PNP transistor outputs.
General Specification
|
Lens F.O.V. (Filed of View) |
0.5° x 25° Rectangular Slit |
Sensing Element |
InGaAs Sensor |
Power Indication |
Blue LED |
Function Indication |
Top & Bottom Yellow LED's |
Remote Self-Check |
Middle Yellow LED's |
|
Min/Max I.R. Threshold Settings |
Adjustable from 270°C via Programming Switch |
Response Time |
1 ms to 250 ms, via Programming Switch |
Supply Voltage |
Standard: 80 - 240 VAC, 50/60 or 24 VDC ± 10% |
Power Consumption |
5 W |
Operating Temperature |
1. -20°C to +50°C without Air Cooling 4. up to 80°C with Heat Shield |
Send Inquiry to This Supplier
You May Also Like
-
Tail and Head Detection Hot Metal DetectorNegotiableMOQ: 1 Set
-
High Accuracy Hot Metal Detector for Cropping ControlNegotiableMOQ: 1 Set
-
MSE-FMD95 Industry Hot Metal Inspection SensorNegotiableMOQ: 1 Set
-
Hot Metal Detector With Product DetectionNegotiableMOQ: 1 Set
-
Quick Response Hot Metal DetectorNegotiableMOQ: 1 Set
-
Winding Control Hot Metal DetectorNegotiableMOQ: 1 Set
-
Hot Metal Detector Used in Paper IndustryNegotiableMOQ: 1 Set
-
Steel Mill Used Hot Metal DetectorNegotiableMOQ: 1 Set
-
Hot Metal Detector Installed in Rod MILLNegotiableMOQ: 1 Set
-
Good Hot Metal Detector With CE CertificationNegotiableMOQ: 1 Set
