Contact Platform Support
Help CenterCHEAP WATER-BASED ANTI FIRE INTUMESCENT FIRE RESISTANT SPRAY PAINT
Related Products
-
SOLVENT-BASED INTUMESCENT FIRE-RETARDANT PAINTUS$ 25 - 25MOQ: 2000 Gallons -
FW-30M WATER-BASED INTUMESCENT MASTICNegotiableMOQ: 1
-
UL PASSED CHEAP FIR RESISTANT AND FIRE RETARDANT MATERIALSUS$ 7 - 10MOQ: 532 Gallons
-
ANTI FIRE SPRAY FIRE FIGHTING MATERIAL FOR PETROLEUM INDUSTRYNegotiableMOQ: 532 Gallons
-
WATERBASED INTUMESCENT ANTI FIRE RESISTANCE COATINGUS$ 20 - 25MOQ: 532 Gallons
PRODUCT NUMBER |
|
FW-30 |
TYPE |
|
The water-based fire retardant coating based on nonflammable resin with special pigment and additives, which will be inflated with the fire or heat to form a fine foam layer. This foam layer can insulate substrates to contact with the fire, therefore consumedly cut down flammability of flammable substrates and retard the transmission of heat and the expansion of fire. |
USES |
|
Used for interior wood furniture, RC wall of buildings and interior decoration. |
CHARACTERISTICS |
|
1. Very fast drying for recoating in a short time. 2. Use the water thinner without any pollution. 3. Inflated above several times when occurred the fire to rapidly reach the fireproof and fire-retardant effects. 4.Carbonized foam body can resist high temperature up to 1000℃ |
COLOR |
|
White or desired colors |
SPECIFIC GRAVITY |
|
1.35 ± 0.05 Kg/L |
FINISH |
|
Flat |
VISCOSITY |
|
90± 10 KU (25 ℃) |
DRYING TIME |
|
Set-to-touch 0.5 hr. Dry hard 2 hrs (25 ℃) |
OVERCOATING INTERVALS |
|
Min. 2 hrs. |
NUMBERS OF COATING |
|
1.CNS 6532 class 3 : min. 3 times 2. ASTM E84 class A : min. 2 times |
OPTIMUM FILM THICKNESS |
|
1. CNS 6532 class 3 : Wet 205 microns / Dry 110 micron 2. ASTM E84 class A : Wet 150 microns / Dry 80 microns |
THEORETICAL COVERAGE |
|
1.CNS 6532 class 3 : 734 g/meter square (6.9 meter square /Gal) 2. ASTM E84 classA : 150 ft2/Gal(13.9 meter square /Gal) |
THINNER |
|
Water |
THINNING RATE |
|
Max. 25% |
VOLUME SOLIDS |
|
Above 60% |
STORAGE SHELF LIFE |
|
Minimum 6 months under normal storage conditions. |
APPLICATION METHOD |
|
Spray,Brush. |
FIREPROOF TEST |
|
Meet CNS 6532 class 3 and ASTM E84 class A(ULFile No. R13583) |
NOTE |
|
1.Before application, stir paint evenly, when paint is too thick, water can beadded within specified quantity. 2. Adhered moisture, grease, rust, dirt or loose paints film on substrate must be cleaned thoroughly. 3. Rough the smooth surface with sand papers and avoid applying the paint in humid exceed 85% RH or temperature low to 5℃ 4. The fireproof effect and dry film thickness of fire retardant coating is in direct proportion, namely the dry film thickness is more thick and the intumescent effect of paint film is better, the fireproof effect is better too.
|
Since 1951, YCP’s unfailing efforts in the continuous development and enhancement of its products have reaped tremendous benefits not only for the company but also for its customers. Known by its famous “Rainbow Paint” brand, YCP has been honored by the CPC Kaohsiung Oil Refinery as an “Accredited Paint and Coatings Supplier” and boasts an endless list of awards and international standard certifications granted by Taiwan’s Bureau of Standards, Metrology & Inspection, Germany’s TUV, UK’s WFRC and LPC, and many others.
Send Inquiry to This Supplier
You May Also Like
-
Anti-static Self-leveling Epoxy Floor CoatingNegotiableMOQ: 1
-
Durable Thermoplastic Paint for Road Marking With Excellent ReflectivityNegotiableMOQ: 100 Kilograms
-
Building CoatingNegotiableMOQ: 2700 Kilograms
-
Titanium Dioxide Rutile Type 93% Used for Paint STD001 Shijiazhuang Standard ChemicalsUS$ 100 - 2000MOQ: 1 Ton
-
Aliphatic Polyurethane Paint for BuildingUS$ 1.8 - 8MOQ: 1000 Kilograms
-
Rotary Water Spray RoomNegotiableMOQ: 1 Set
-
EASY PAINTNegotiableMOQ: 2000 Pieces
-
Rubber Paint on SaleUS$ 1.45 - 35.21MOQ: 100 Pieces
-
Powder Coating EquipmentUS$ 75,000 - 950,000MOQ: 1 Set
-
3D STEREOSCOPIC ELECTROLUMINESCENT PAINTSUS$ 1,000 - 1,700MOQ: 1 Set
