Contact Platform Support
Help CenterIcs Repeater 2100MHz Repeater 3G UMTS Home Amplifier 3G ICS Amplifier
Related Products
-
China Supplier Mobile Indoor Gsm Repeater Booster Cover 900mhz 65db Gsm Signal BoosterNegotiableMOQ: 5 Pieces -
Pico Mini Mobile Indoor Gsm Repeater OEM Cover 900mhz Good Signal Gsm BoosterNegotiableMOQ: 5 Pieces
-
Indoor Gsm Repeater OEM China Factory 900mhz Good Signal Hotsales Egypt Mesh Gsm Mobile Repeater BoosterNegotiableMOQ: 5 Pieces
-
Best Quality China Supplier Mobile Indoor Gsm Repeater Booster Mobile Signal Booster Gsm 980NegotiableMOQ: 5 Pieces
-
New Design Mobile Indoor Gsm Repeater Booster Cover 900mhz Gsm Network BoosterNegotiableMOQ: 5 Pieces
functions: 3G ICS amplifier
a. AGC(Auto gain control):
with this function can automatic check the input signal and output signal of repeater. If input signal overloading, system will adjust the gain, and auto setting parameter for repeater`s normal output. Ensure equipment will not increase jamming base station, no matter outside`s signal change.
b. Safe Mode:
Equipment will automatic check the input and output signal strength and auto adjust gain during use, when input signal overloading equipment lose control, will open Safe mode, shut off the amplification circuit, then under dormant state, ensure equipments not affect the base station working.
c. Double ALC(auto level control):
The Automatic adjustable range of equipment`s gain dynamic reach 60dB, the ALC of system Dual redundant, Ensure system`s high reliability and high stability.
d. Uplink & Downlink automatic linkage debugging:
after installed and power on, the system will automatic check input power, and control output power`s value, when work out system`s downlink gain, will automatic adjusting system`s uplink gain, to keep system`s amplification balance, come true the equipment`s Uplink & Downlink automatic linkage debugging.
Specification Details
| MODEL: | ICS10-WCDMA 3G ICS amplifier |
| Frequency range | WCDMA(uplink:1920~1980mhz;Downlink:2110~2170mhz) |
| Gain | 45±3dB |
| Automatic Level Control | >= 60dB |
| NF | <= 5dB |
| Gain Flatness | <= 2dB/3.84MHz |
| Automatic Gain Control | 30dB in step of 1dB (Auto) |
| Output Power | UL >= 10±2dBm DL >= 10±2dBm |
| Output Power | <= -25 dBm |
| Input intermodulation | Comply with 3GPP TS 25.106 |
| Output intermodulation | Comply with 3GPP TS 25.106 |
| Frequency stability | <= 0.01ppm |
| ACPR | 45dBc/30KHz@±5MHz & ±10MHz |
| Spurious Emission Mask | Comply with 3GPP TS 25.106 |
| Spurious Emission | Comply with 3GPP TS 25.106 |
| Modulation Accuracy | <= 12.5% |
| Peak Code Domain Error | <= -35dB @ Spreadimg Factor 256 |
| Group Delay | UL<= 1μs |
| Dimension | 240mm×160mm×50mm |
| weight | <= 1Kg |
| power | AC220V / DC 5V <= 350 mA |
| Working environment temperature | -10~55°C |
install repeater (very easy and simple):
a. Equipment as usual put on the windowsill or table closer to window, with light side is Front, face to indoor, which need signal cover area; the other side face to outdoor, which direct to base station, to receive signal.
b. In order to ensure the use effect of the equipment, in front of equipment which distance 1meter range should not have shelter, and back of equipment 2meters range should not have shelter(or the glass pasted with metal film), 1meter radius range should not always have peoples move.
c. After power on, you should leave equipment distance over 1meter then watch the lights situation, if 4 lights all green then means receiving signal is very good; 3 lights green means receiving signal is good; 2 lights green means receiving signal normal; only 1 light green means receiving signal is bad, should adjust equipment`s drop location.
d. Standing in the flank of equipment and fine turning the equipment`s face direction(always keep in front of equipment without shelter), until all the lights be green and face to bad signal area, then finished installation.
e. If the window have no place to put equipment, you can pasting on the glass with equipment`s self MAGIC TAPE, which right paste location should use cell phone to test where can receiving strongest signal before pasting.
A regular ICS repeater consists of: (full kit)
- 1 -ICS repeater device
- 2 - Power adapter
- 3 - User manual
- 4 - blank package box
Send Inquiry to This Supplier
You May Also Like
-
China Supplier 2G Signal Repeater Gsm 900mhz Mobile Phone Signals Booster RepeaterNegotiableMOQ: 5 Pieces
-
China Supplier 2G Signal Repeater GSM 900 Mobile Gsm Cell Phone RepeaterNegotiableMOQ: 5 Pieces
-
900mhz 23dbm China Supplier 2G Signal Repeate GSM Mobile Booster Gsm Long Distance RepeaterUS$ 120 - 135MOQ: 5 Pieces
-
LCD Home Use China Supplier 2G Signal Repeater GSM Gsm 900mhz 70db Gsm Mobile Signal RepeaterNegotiableMOQ: 5 Pieces
-
Lintratek Brand 70db 2G Signal Repeater GSM 900 Gsm Signal RepeaterUS$ 120 - 135MOQ: 5 Pieces
-
CE/ROHS Certificate 70dbi 2G Hotel Signal Repeater GSM 900 Mobile Booster Home Gsm RepeaterUS$ 120 - 135MOQ: 5 Pieces
-
LCD Office Use China Supplier 2G Signal Repeater GSM Gsm 900mhz, 70db Gsm RepeaterNegotiableMOQ: 5 Pieces
-
Made in China 2G Signal Repeater GSM 900mhz Repeater GsmUS$ 120 - 135MOQ: 5 Pieces
-
China OEM 2G Signal Repeater GSM 900 Cell Phone Gsm 990 Mobile RepeaterNegotiableMOQ: 5 Pieces
-
Led Display 900mhz 23dbm High Gain China Supplier 2G GSM Repeater Passive GsmUS$ 120 - 135MOQ: 5 Pieces
