Contact Platform Support
Help CenterVirgin and Recycled HDPE / Blow Molding Grade HDPE Granules
Related Products
-
Virgin LDPE Granule/LDPE Resin/LDPE Pellet, LDPE for Film Shopping BagUS$ 1000.00 - 1000.00MOQ: 2 Tons -
Virgin & Recycled Low Density Polyethylene LDPEUS$ 1300.00 - 1300.00MOQ: 2 Tons
-
LDPE Film Grade / LDPE Injection Molding Grade / LDPE Extrusion GradeUS$ 1000.00 - 1000.00MOQ: 2 Tons
-
Virgin/recycled LDPE White Granules,recycled LDPE Pellets,injection Grade LDPEUS$ 1200.00 - 1200.00MOQ: 2 Tons
-
Virgin & Recycled LDPE Granules/ldpe Scrap/Virgin/Recycled LDPE for Film and BagsUS$ 1250.00 - 1250.00MOQ: 2 Tons
Introduction
HDPE has several properties that make it ideal as a packaging and manufacturing product. It’s stronger than standard polyethylene, acts as an effective barrier against moisture and remains solid at room temperature. It resists insects, rot and other chemicals. It is easily recyclable and can be used again and again. Recycled HDPE creates no harmful emissions during its production or during its use by the consumer. Also, HDPE leaks no toxic chemicals into the soil or water.
HDPE is one of the most commonly used plastics in the world. It is typically found in milk jugs, plastic bags and refillable plastic bottles. In addition to plastic lumber and recycled plastic furniture, recycled HDPE is used to manufacture lawn and garden products, buckets, crates, office products and automobile parts.
2.Grade
HDPE pipe grade can be used in the production of pressure pipes, such as pressurized water pipes, fuel gas pipelines and other industrial pipes.
HDPE Injection grade, red, blue, green,
HDPE Blow grade, white, grey, black
HDPE Pipe Grade black pellet
HDPE coating grade
And So On
3.Specification
HDPE cable material Property |
Typical Value |
|
Mass density g/cm 3 |
0.941-0.959 |
|
Melt flow Rate(190 centidegree /2.16kg)g/10min |
≤1.0 |
|
Tensile yield strength MPa |
≥19.0 |
|
Flexural modulus Mpa |
≥965 |
|
Elongation@ break % |
≥400 |
|
Impact Embrittlement temperature centidegree |
MAX -118 |
|
Dielectric Constant |
100KHZ |
2.32 |
1MHZ |
2.31 |
|
Loss Tangent |
100KHZ |
MAX 0.0001 |
1MHZ |
MAX 0.0001 |
|
Volume resistivity OHM-CM |
MIN 1x10 15 |
|
Send Inquiry to This Supplier
You May Also Like
-
POM Granules K300 for Automotive Fuel Components, High Heat Resistance, Low Creep, Tensile Strength 60 MPaNegotiableMOQ: 1 Kilogram
-
Reinforced Acetal Copolymer POM Pellets - GF-10 Modified M90 GM90 M270 M25 for Engineering ApplicationsUS$ 1 - 1.05MOQ: 1 Kilogram
-
Nylon 66 14G15 High Rigidity Grade for Mechanical Structural ComponentsNegotiableMOQ: 1 Kilogram
-
Plastic Raw MaterialNegotiableMOQ: 2300 Bags
-
YUPLENE® BX3920 Polypropylene Impact Copolymer Superior Impact Resistance and Dimensional StabilityNegotiableMOQ: 25 Kilograms
-
PET Release Liner and Film Facestock for Self Adhesive (pressure Sensitive) Materials, and BOPP Functional Pack Films for Packaging IndustryNegotiableMOQ: 35 Rolls
-
PVC Resin Factory 25kgNegotiableMOQ: 1 Metric Ton
-
Beckett Transparent Square Telescopic Plastic Packaging Tube Box With Ratchet Length Adjustment for Cutting ToolUS$ 0.13 - 0.17MOQ: 5000 Pieces
-
Series Polystyrene Take-Out Containers Making MachineUS$ 1,000 - 50,000MOQ: 1 Set
-
Customized Pvc Anti-heat Shrink Film SwitchUS$ 0.09 - 0.3MOQ: 500 Pieces
