Contact Platform Support
Help CenterDFC-201A D/S Reflective Aluminum Foil Insulation
Related Products
-
DFM-101A D/S Reflective Aluminum Foil InsulationNegotiableMOQ: 10000 Square Meters -
DFR-101A D/S Reflective Aluminum Foil InsulationNegotiableMOQ: 10000 Square Meters
-
DFR-101B D/S Reflective Aluminum Foil InsulationNegotiableMOQ: 10000 Square Meters
-
DFR-201A D/S Reflective Aluminum Foil InsulationNegotiableMOQ: 10000 Square Meters
-
DFR-201B D/S Reflective Aluminum Foil InsulationNegotiableMOQ: 10000 Square Meters
BondTape DFC-201A
D/S Reflective Aluminum Foil Insulation
Description & Application
A medium duty, Housing Grade D/S Foil Insulation. It is made from 2 outer layers of pure aluminum foil and 1 layer natural Kraft paper. These layers are bonded together with polyethylene and reinforced with 3-way fiberglass scrim. It is ideally used as sarking and insulation under roofs, in walls behind cladding or under timber floors, for residential and commercial building. Combining with glasswool / rockwool / mineral wool / foam insulation, it is excellent as a vapor barrier for air-conditioning ducts, pipes and vessels.
Product Construction
Composition |
Description |
Value (English) |
Value (Metric) |
Foil |
Aluminum |
0.28 mil |
7 micron |
Reinforcing - MD |
Fiberglass |
2 / inch |
8 / 100mm |
Reinforcing - XD |
Fiberglass |
3 / inch |
12 / 100mm |
Adhesive |
Polyethylene |
------ |
------ |
Kraft |
Natural |
60 lbs / 3000 ft2 |
100 gsm |
Adhesive |
Polyethylene |
------ |
------ |
Foil |
Aluminum |
0.28 mil |
7 micron |
Typical Physical Properties
Physical Properties |
Test Method |
Value (English) |
Value (Metric) |
Basis Weight |
Scale |
34.8 lbs / 1000 ft2 |
170 gsm |
Permeance (WVTR) |
ASTM E96, Procedure A |
0.02 perm |
1.15 ng/N.s |
Tensile Strength - MD |
ASTM D828 |
58.0 lbs/In |
255 N/25mm |
Tensile Strength - XD |
ASTM D828 |
29.5 lbs/In |
130 N/25mm |
Burst Strength |
ASTM D774 |
79.8 psi |
55 N/cm2 |
Low Temperature Resistance |
ASTM D1790 4 hrs @-40 °F (- 40 °C) |
Remains Flexible No Delamination |
Remains Flexible No Delamination |
High Temperature Resistance |
ASTM D1790 4 hrs @ +240 °F (+116 °C) |
Remains Flexible No Delamination |
Remains Flexible No Delamination |
Emissivity |
ASTM E408 |
0.03 |
0.03 |
Available Roll Width: 1.25m, 1.35m
Remarks
1. The data above are typical results and subject to change without notice.
2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: ±0.5%.
3. The products should be stored at room temperature, kept from wet and kept away heat source.
4. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.
Send Inquiry to This Supplier
You May Also Like
-
Cast Iron Trench Drain Cover, 1/2" Thick, Load Class E600, 24"x12" Solid Grate for Industrial UseNegotiableMOQ: 300 Square Meters
-
HPL Panel (clean Room)NegotiableMOQ: 100 Square Meters
-
Industrial Steel Grating, 32x3mm Serrated Bar, 30x50mm Pitch, Black Painted Finish, 1500x1000mm SheetsNegotiableMOQ: 50 Cubic Centimeters
-
SOURCE POLYURETHANE SANDWICH PANEL FactoryNegotiableMOQ: 100 Pieces
-
Sandwich PanelNegotiableMOQ: 2500 Pieces
-
Corrugated Metal Cladding Panel 0.7mm Zincalume Steel for Roof and Wall SystemsNegotiableMOQ: 1 Square Meter
-
Hot Rolled ISO9001 CE JIS Certified Carbon Steel Seamless Pipe Coated Modern OD 5mm/6mm A106 Q345 Q235 for Oil ApplicationsNegotiableMOQ: 1 Ton
-
Hot Dipped Galvanized Diamond Metal Lath Expanded 2-1/2-gauge Steel Sheet Anti-Corrosion Durable Low Cost Roofing Wall FloorUS$ 1.7 - 3.2MOQ: 1 Piece
-
High Purity Zirconia Ceramic Ring 8mm OD With 1500 MPa Flexural Strength for Valve SealsNegotiableMOQ: 1 Piece
-
pu Wall Sandwich Panel Rigid Insulation Polyurethane Foam BoardNegotiableMOQ: 1
