Contact Platform Support
Help CenterVIT Fluorocarbon Coating Sealer (use for Metal)
Related Products
-
VIT Metallic Fluorocarbon PaintNegotiableMOQ: 1000 Kilograms -
VIT Modification Fluorocarbon Metalic Coating/paint (10-year-long Service Life)NegotiableMOQ: 1000 Kilograms
-
VIT Special Primer Paint for Fluorocarbon Metal Paint WGS-6331NegotiableMOQ: 2000 Kilograms
-
VIT Metal Fluorocarbon Paint(esp. Steel Structure) WGS-6351NegotiableMOQ: 2000 Kilograms
-
VIT Modified Fluorocarbon Metal Paint/metallic PaintNegotiableMOQ: 1000 Kilograms
Specifications
VIT Fluorocarbon metal coating gives excellent hermetic, super osmotic fore,anyi-alkali and salty resistance,moisturer resistancVIT fluorocarbon metal paint/coating series
|
VIT fluorocarbon metal paint/coating series Model no.:WGS-6331 | |
|
Product features |
Excellent hermetic Super osmotic force Anyi-alkali and salty resistance Moisturer resistance |
Application |
Suitable for for sealing concrete buildings and tile basis materials |
Application method |
roll, brush, spray |
|
Technical parameter |
Ratio: Main paint: curing agent :diluent=100:7:25-40 Surface dry equal or more than 30 mins |
Packing details: |
5/18L |
|
Construction samples |
VIT putty powder SWZ-0001 Hard dry >24 hrs Sanding with 320# sanding paper VIT fluorocarbon coating sealer WGS-6331 Coating weight 8-10m²/L/one coat VIT metal fluorocarbon WGS-6351 Coating weight 8-10m²/L/one coat |
Self life : Minimum 12 months at 77F (25°c)-- Unopened and store in dry and cool place. Keep it in a cool and dry place above 0°c, and frost should be strictly avoided.
Note:
1. Stir the paint thoroughly before use.
2. Pour the paint and hardener together, following the proportion stipulated on the label strictly, mix thoroughly and then filter the mixture with 200# filter screen. To avoid bubbling, let the mixture stand for 15 minutes before use.
3. To achieve a better coating performance, seal the base wood with VIT sealer.
4. The added thinner will vary from application conditions.
5. Seal the paint can tightly if it is not used up at one time.
6. Method: Brush, roller, conventional spray and airless spry.
Thinning:
1. We strongly recommend you to use VIT matched thinner to achieve the ideal coating performance. Adjust the thinning ratio according to needs.
2. No dilution before the paint and hardener are thoroughly mixed.
3. Mix thoroughly before use.
Notes for use
1. Thick painting is not suggested to avoid pin holes and bubbling of the paint film.
2. Try to use our matched products and do not add other chemical elements in the paint.
3. Do not apply when the temperature is below 5°C and RH is 85% or above.
4. If moisture content of the wood exceeds 12%, dry it first.
5. The paint film is easy to crack and peel off if the wood putty is not completely dry or thoroughly sanded.
6. Each layer must be dry enough and sanded thoroughly before the application of next step or it will cause blushing or peeling off of the paint film.
7. The work area and application tools should be maintained clean to avoid bad coating performance.
8. Select paint according to the wood and arts and crafts.
Caution:
1. Extremely inflammable liquid, keep away from sources of ignitions. Store in a cool, dry and well-ventilated place.
2. Avoid contact with eyes, skin and clothing. In that case, immediately flush eyes or skin with plenty of water for 15 to 20 minutes. Get medical attention, if irritation or symptoms of overexposure persists.
3. For professionals use only. Keep it out of reach of children and away from food, beverages etc.
Warm tips:
1. In order to better guarantee the lawful right and interest of the consumers, it is not recommended to purchase products without full label identification. Beware of counterfeit.
2. The product is only to professionals, the details of product information refer to Uses manual.
Send Inquiry to This Supplier
You May Also Like
-
Anti-static Self-leveling Epoxy Floor CoatingNegotiableMOQ: 1
-
Energy-Efficient Full-Automatic PVC Dipping Machine for Batch ProductionNegotiableMOQ: 100 Pieces
-
Building CoatingNegotiableMOQ: 2700 Kilograms
-
Titanium Dioxide Rutile Type 93% Used for Paint STD001 Shijiazhuang Standard ChemicalsUS$ 100 - 2000MOQ: 1 Ton
-
Aliphatic Polyurethane Paint for BuildingUS$ 1.8 - 8MOQ: 1000 Kilograms
-
Rotary Water Spray RoomNegotiableMOQ: 1 Set
-
EASY PAINTNegotiableMOQ: 2000 Pieces
-
Rubber Paint on SaleUS$ 1.45 - 35.21MOQ: 100 Pieces
-
Powder Coating EquipmentUS$ 75,000 - 950,000MOQ: 1 Set
-
3D STEREOSCOPIC ELECTROLUMINESCENT PAINTSUS$ 1,000 - 1,700MOQ: 1 Set
