Environmental Protection Dinning Table Paint
Name |
PU hotel furniture decoration paint
Model :PU 867 series |
Product features |
1, smelless after hard dry
2, high smooth ,bright
3, Can be do open paint .
4, High hardness
5, good self-leveling
|
Applicability |
Suitable use for dack color furnitures ,office furnitures and all kinds of wooden furnitures .
|
Application method |
air spray ,brush and roll ways . |
Technical paremeter |
Spray : PU 867 series paint : hardener : diluent =2 : 1 : 1.6 -2 .
Viscosity more than 13 sec ( 4# ) .
Once mixed , must be used within 6 hrs
Hard dry at least 4 hrs , suggest keep overnight .
|
Packaging |
19 kg ( net weight ) .
|
Construction example |
Material : beech and walnut etc
Sanding with 180# sanding paper
PU transparent primer
Coating weight 100g / one square meter ( open used )
Hard dry at least 4 hrs , suggest keep overnight .
Sanding with 320# sanding paper , then the 600# later .
Color-match
Sanding with 600# sanding paper
PU transparent finish paint
Coating weight 100g / one square meter ( open used )
Hard dry at least 4 hrs , suggest keep overnight .
|
|
Self life |
Minimum 12 months at 77F(25°C)-Unopened and stored in the dry and cool Places above 0°C . The frost should be strictly avoided . notes : 1, if the product contact your skin or eyes must be washing with fresh water immediately and go to see the doctor . 2,keep it out of children reach , and far from the heat sourse .
|

Note:
1. Stir the paint thoroughly before use.
2. Pour the paint and hardener together, following the proportion stipulated on the label strictly, mix thoroughly and then filter the mixture with 200# filter screen. To avoid bubbling, let the mixture stand for 15 minutes before use.
3. To achieve a better coating performance, seal the base wood with VIT sealer.
Notes for use
1. Thick painting is not suggested to avoid pin holes and bubbling of the paint film.
2. Try to use our matched products and do not add other chemical elements in the paint.
3. Do not apply when the temperature is below 5°C and RH is 85% or above.
4. If moisture content of the wood exceeds 12%, dry it first.
5. The paint film is easy to crack and peel off if the wood putty is not completely dry or thoroughly sanded.
6. Each layer must be dry enough and sanded thoroughly before the application of next step or it will cause blushing or peeling off of the paint film.
7. The work area and application tools should be maintained clean to avoid bad coating performance.
Caution:
1. Extremely inflammable liquid, keep away from sources of ignitions. Store in a cool, dry and well-ventilated place.
2. Avoid contact with eyes, skin and clothing. In that case, immediately flush eyes or skin with plenty of water for 15 to 20 minutes. Get medical attention, if irritation or symptoms of overexposure persists.
3. For professionals use only. Keep it out of reach of children and away from food, beverages etc.
Warm tips:
1. In order to better guarantee the lawful right and interest of the consumers, it is not recommended to purchase products without full label identification. Beware of counterfeit.
2. The product is only to professionals, the details of product information refer to Uses manual.
Send Inquiry to This Supplier
You May Also Like
-
Anti-static Self-leveling Epoxy Floor CoatingNegotiableMOQ: 1
-
Energy-Efficient Full-Automatic PVC Dipping Machine for Batch ProductionNegotiableMOQ: 100 Pieces
-
Building CoatingNegotiableMOQ: 2700 Kilograms
-
Titanium Dioxide Rutile Type 93% Used for Paint STD001 Shijiazhuang Standard ChemicalsUS$ 100 - 2000MOQ: 1 Ton
-
Aliphatic Polyurethane Paint for BuildingUS$ 1.8 - 8MOQ: 1000 Kilograms
-
Rotary Water Spray RoomNegotiableMOQ: 1 Set
-
EASY PAINTNegotiableMOQ: 2000 Pieces
-
Rubber Paint on SaleUS$ 1.45 - 35.21MOQ: 100 Pieces
-
Powder Coating EquipmentUS$ 75,000 - 950,000MOQ: 1 Set
-
3D STEREOSCOPIC ELECTROLUMINESCENT PAINTSUS$ 1,000 - 1,700MOQ: 1 Set
