Contact Platform Support
Help CenterInduction Heater for Bolts DD-25I
Related Products
-
IGBT High Frequency Induction Quenching Machine DD-45US$ 5,800 - 6,000MOQ: 1 Piece -
30KW Portable High Frequency Induction Heating for Bolts/nutsUS$ 2,600 - 9,000MOQ: 1 Set
-
25kw IGBT High Frequency Induction Heating MachineUS$ 1,587 - 4,761MOQ: 1 Piece
-
Otc 6650 Magnetic Induction Heating SystemUS$ 1,200 - 15,000MOQ: 1 Set
-
Induction Heat Seal LinerUS$ 1,200 - 15,000MOQ: 1 Set
Specifications
1. USD1587--USD4523.00/Pc2. 25 KW IGBT SOLID POWER MODULE
3. AUTO TRACKING FREQUENCY
4. DIAGNOSIS ALARMING SAYSTEM ETC.
induction heater for bolts DD-25I
Main Features:
1. It adopts the latest MOSFET and IGBT frequency conversion control technology. It has Advantages of high efficiency, energy saving and high output power;
2. It has constant current and constant power control function, which significantly optimize metal heating process, so that makes it possible for fast speed heating and brings the superiority of product into full play;
3. It has time setting function of heating, heating preservation and cooling. Moreover, the power of heating and heating preservation could be adjusted respectively. It is applicable for batch and repeated heating places;
4. It has as many as ten types of fault protection and display function including over-current, over-voltage, phase missing, which provides reliability and durability;
5. It is safe and reliable, and do not have ten thousand voltage, thus ensure safe operation;
6. It has full load design, which makes it possible for 24hour continuous operation. Infrared temperature measurement is available for automatic control of temperature. This improves heating quality and simply manual operation.
WEBSITE: /en
1) No overall heating of the workpiece, it can be selectively localized heat, thus less power consumption, small deformation of the workpiece.
2) Fast heating, enhances the processing in a very short period of time to achieve the required temperature, or even 1 second. So that the workpiece surface oxidation and decarbonization are lighter, most of the artifacts are not gas.
3) The equipment needed by adjusting the operating frequency and power, the surface hardened layer of regulation. So that the hardened layer of fine martensite, hardness, strength and toughness are high.
4) After heat treatment by induction heating of the workpiece, the surface under a thick layer of hard toughness region, with better compression stress, fatigue and the workpiece are higher breaking capacity.
Packing: wooden case
Warranty:
One year free warranty by sending spare parts .
If later on some problem occur and need our assistance, we can provide 24H telephone and network technical support.
...
Send Inquiry to This Supplier
You May Also Like
-
40T Electric Tilting Machine for Heavy Parts RotationNegotiableMOQ: 1 Set
-
Efficient Copper Cable Granulator for Scrap Wire RecyclingNegotiableMOQ: 1 Set
-
PLC Controlled Food Machine 500kg/h Capacity 304 Stainless Steel IP65 Waterproof PanelUS$ 200MOQ: 1 Acre
-
Automatic/manual Fluidized Bed Dip Powder Coating Equipment Line for Refrigerator Shelves ProductionUS$ 2000 - 40000MOQ: 1 Set
-
Double Shaft Shredder Unit, Heavy‑Duty Two‑Shaft Shredding Equipment for Scrap Metal, Tyre, Plastic and Wood Waste Recycling ProjectsNegotiableMOQ: 1 Set
-
Large Gear Ring for Wind Turbine Gearbox, 17CrNiMo6, Carburizing Quenching, Up to 4000mm, Mill Test ReportUS$ 1000MOQ: 1 Combo
-
Rotary Kiln Plant Design Solution 500 TpdUS$ 2000 - 80000MOQ: 1 Set
-
Vertical Scrap Metal Baler With 5.5kW Motor & Safety Lock SystemNegotiableMOQ: 1 Set
-
Automatic Gabion Basket Wire Mesh Forming and Welding MachineNegotiableMOQ: 1 Set
-
Metal Zipper Chemical Cold Plating Machine (13 Tanks)US$ 1,000 - 10,000MOQ: 1 Set
