Contact Platform Support
Help Center3PE Steel Pipes
Related Products
Specifications
Heat Shrinkable Sleeve1. Field Coating Materials
2. Good anticorrosion
3. 3PE Coated Steel Pipes
4. DN105-DN1200mm
Heat Shrinkable Sleeve for 3PE Coated Steel Pipes
1.1 Product Structure
- The inner layer is two-components epoxy primer which coated on steel pipe;
- Intermediate level is special hot melt adhesive;
- Outer layer is modified radiation crossing linking polyethylene backing.
1.2 Features & Benefits:
Heat Shrinkable Sleeves provide great corrosion protection, Superior resistance to Cathodic Disbondment and excellent durability against abrasion and chemical attack. The result is effective, good performance of sealing, wide application, easy to operate and preheating temperature low (50 °C) ,long term protection against corrosion.
- Cross-linked backing provides superior abrasion, mechanical and chemical attack resistance.
- High performance adhesive provides excellent resistance to Cathodic Disbondment to ensure long-term corrosion protection.
- Just-in-time customized lengths allow bulk rolls to be field cut to protect any pipe size
- Open sleeve configuration allows the product to be applied after the pipeline has been welded and cleaned.
1.3 Specification( mm)
Pipeline size: from Ø 108 to Ø 1554 ( 4’’---60’’)
Sleeves width: 100mm, 150mm,200mm, 300mm,450mm,500mm,600mm,900mm
Closure patch: 100mm, 150mm,200mm (4’’, 6’’, 8’’)
Model: HSS 3600/505/ Ø 1066.8
HSS--Heat shrinkable sleeves
3600------Roll length(mm)
505----- -Roll Width (as supplied)
Ø 1066.8----Joint or pipeline Diameter
1.4 Technical Datas
Width deviation (max) |
±10% width or 0.25 in.(6mm), |
AWWAC216-5.3.1 |
Dielectric strength |
400 V/mil(15 V/um) |
ASTM D149 |
Volume resistivity |
1014 ohm-cm |
ASTM D257 |
Adhesion to steel |
15 lb/in.width (25 N/cm) |
ASTM D1000 |
Lap shear |
12 psi |
ASTM D1002 |
Heat shock |
No visual cracking,flowing, or dripping |
AWWAC216-5.3.8 |
Tensile strength |
2200 psi min |
ASTM D638 |
Elongation 23 |
400% min |
ASTM D638 |
Impact resistance |
25 in.-lb(282cm-N) |
ASTM G14 |
Impact Resistance |
ASTM G14 |
≥50 |
|
Cathodic Disbondment at 23°C 30 days mm rad |
ASTM G 8 |
≤25 |
Dielectric Breakdown Voltage 23°C MV/M |
ASTM D 149 |
≥15 |
Send Inquiry to This Supplier
You May Also Like
-
High Recovery Gold Washing Carpet Mining Alluvial Gold Moss Mat Grass Carpet Gold Mining CarpetNegotiableMOQ: 10 Rolls -
YUPLENE BX3920 Propylene Impact Copolymer for Auto Parts and Electric Appliances Injection MoldingNegotiableMOQ: 25 Kilograms
-
Multicolor Customized Plastic PartsNegotiableMOQ: 100 Kilograms
-
IATF16949 Auto Pipe Connector Plastic Mold PA66 Heavy Duty Parts Saudi ArabiaNegotiableMOQ: 5000 Pieces
-
Polyester Plastic Steel Wire for Supporting Vineyard/Agricultural Orchard/Planting Greenhouse Fixing Wire Customized in Colors BOLIUS$ 973 - 1000MOQ: 1 Kilogram
-
G3/8 G1/2 G3/4 G1 Male Threaded Nylon End Cap Plug Pipe Fittings BSP Water Tubing Stopper Prevent Leakage Choke PlugNegotiableMOQ: 100 Pieces
-
High Quality Retort Autoclave Separator Sheet Extruding Plastic Modling Cutting Processing ServiceUS$ 10.00MOQ: 10 Sheets
-
Good Quality Sun Shadow Shade Sail Garden Plaza Yard Reinforced Corner Shade Sail for MexicoNegotiableMOQ: 100 Pieces
-
Custom Plastic Injection Electrical Products Custom Plastic Injection ServicesNegotiableMOQ: 1
-
Plastic Machinery Spare Parts Automotive Plastic Parts With Customizes ColorNegotiableMOQ: 1 Piece
