Home > Health & Medicine > Medical Supply > Disposable Medical Supplies > Helix T2 Tourniquet,radial Artery Compression Tourniquet

Helix T2 Tourniquet,radial Artery Compression Tourniquet

Helix T2 Tourniquet,radial Artery Compression Tourniquet photo-1
US$ 7 - 8 MOQ: 100 Pieces
Key Specifications
Get Latest Price
Properties:
Other, hemostasis
Brand Name:
M+
Model Number:
010212
Payment & Shipping
Payment Methods:
Port of Shipment:
Guangzhou
Delivery Detail:
Delivery time depends on order quantity.
Properties Other, hemostasis
Brand Name M+
Model Number 010212
Place of Origin Guangdong, China

Specifications

*.soft feel
*.accurate pressure
*.visible compression
*.high transparency
*.radial artery compression device

the features of tourniquet(radial artry compression device )

Product Features

  1. Compression pad made of special material, dedicated to patient’s comfort.
  2. Transparent design for precise operation.
  3. Homeostasis achieved easily with pressure indicator, tissue damage avoided.
  4. Dynamic wrist plate makes procedure more efficient
  5. Hotest sale product in our domestic market and world market .We often win the tender in many region tender.

 

Intended Use

This is a compression device to assist homeostasis of the radial artery after a transradial procedure.

 

Instruction

  1. After the punctural operation is completed, pull the sheath out for 2-3cm; in the meantime; make sure no vasospasm occurs. If vasospasm is evident, it should be treated before the homeostasis procedure begins.
  2. Align the front edge of the compression pad with puncture point, the apply the device to the patient.

Caution: This device should be positioned differently when used on different hands (left or right) of the patient. When attaching the device, the strap slot should be located on the same side of the patient’s little finger.

  1. Insert the Velcro band into the strap slot on the wrist plate; keep the top of the pressure indicator leveled with turn cap; affix the Velcro band firmly.
  2. Rotate the turn cap following the arrow indicating direction, tighten the turn cap clockwise by three to five laps, the green pressure zone (100-200mmHg) represents safe pressure area; if the indicator is over the midline of the green zone, the pressure indicates approximately 150mmHg; keep rotating to yellow pressure zone (200-250mmHg), it suggests excessive pressure, then the device will lock up for protection from tissue damage.

Note: the choice of haemostatic pressure depends on individual condition. Complete the operation and check the bleeding status, confirm that the radial artery and ulnar artery pulses to avoid tissue ischemic necrosis. Checking methods are as follows: 1.Pressing patient’s thumb or index finger to see if the blood quickly filled in pressed area, check whether the radial artery runs well or not; 2.The thumb arterial pulse can be felt.

 

  1. When removing the sheath, compress both ends of wrist plate to yield a small space allowing the sheath to be pulled out without damaging the tissues, the pressure should be referred to the position of the green pressure indicator.

Caution: 1.During extraction, the pressure should be remaining to the level when there is no bleeding accured; the pressure indicator should not be exceeding the top yellow zone; 2. after the sheath removed, the wrist plate should be released swiftly to avoid unexpected bleeding.

  1. After appropriate time (depending on the dosage of HEPARIN given), decompress the device by turning turn cap 1/2 to 1 full counter-clockwise circle every 45minutes to 1 hour. If the bleeding re-occurs, apply compression until haemostasis is achieved and repeat above steps.
  2. When haemostats is completed, rotating the turn cap counter clockwise, remove the tourniquet; confirm no bleeding on the puncture site and cover the puncture site dressing.

Note: Avoid upper limb motion in 2 hours after operation. Constrain motion of the wrist joint for 4-6 hours.

 

 

helix T2 tourniquet,radial artery compression tourniquet

 

helix T2 tourniquet,radial artery compression tourniquethelix T2 tourniquet,radial artery compression tourniquethelix T2 tourniquet,radial artery compression tourniquethelix T2 tourniquet,radial artery compression tourniquethelix T2 tourniquet,radial artery compression tourniquet

 

Company profile:

 

Medplus Inc. was founded in August 2006. Since the company was founded, Medplus Inc. has stood for integrity, derived from morality and driven by duty. We aim for sale products and strive for consistent quality. We actively participate in the global market, and strive to gain the trust and respect of our customers. We mainly use polymeric materials, and are engaged in the development, manufacture, distribution and sale of disposable medical devices in domestic and international markets.

 

Main Business

  1. skin marker
  2. biopsy kits (needle): [irremovable semi-automatic biopsy needle, removable semi-automatic biopsy needle and biopsy needle which match Bard Magnum Gun]
  3. anesthesia breathing bag
  4. breathing circuit (corrugated circuit, collapsible circuit ,coaxial circuit ,and collapsible circuit limb)
  5. anesthesia mask
  6. endoscopy mask
  7. check valve
  8. tourniquet (radial artery compression device )
  9. loss of resistance syringe
  10. suction liner  
  11. breathing circuit stand
  12. drainage bottle

Certifications:

 

We attained Quality System Certification for the ISO13485 and ISO9001, FDA and CE Certification in 2007. As a new enterprise, Medplus cooperates with a lot of well known medical device manufacturers and offers high quality and advanced medical products all over the world.

 

helix T2 tourniquet,radial artery compression tourniquethelix T2 tourniquet,radial artery compression tourniquethelix T2 tourniquet,radial artery compression tourniquet

 

About us:

 

There are 10W cleaning room quality is guarantee and accepted by our customers .

Cost effective control, Department of technology and QC and sales team 

80% products exportation, Main customers from EU, US, AU, AF, AS, etc

100 % Factory price, Quantity discount, Flexible terms of payment, fast delivery in safe, timely after sale service.

Hope we can cooperate happily if you are interested in our company.

Sincerely yours

 

Have a nice day

 

 

Sales &market department  

 

Medplus Inc. 

Send Inquiry to This Supplier

* Message
0/5000

Want the best price? Post an RFQ now!
Business Type
Manufacturer
Year Established
2007
Factory Size
1,000-3,000 square meters
Total Employees
51 - 100 People

Recommended Categories

Explore top categories and find suppliers for your specific needs