Contact Platform Support
Help CenterStandard Screw Ground Source Heat Pump(35RT-700RT)
Related Products
-
Central Air Conditioning UnitsNegotiableMOQ: 1 Unit -
Screw Heat Pump-ground Source Heat PumpNegotiableMOQ: 1 Unit
-
Ground Source Heat Pump/Geothermal Heat PumpNegotiableMOQ: 1 Unit
-
8KW-50KW Ground Source Heat Pump for ResidentialNegotiableMOQ: 1 Unit
-
High Effifiency Ground Source Heat Pump COP 6.0NegotiableMOQ: 1 Unit
Specifications
standard screw ground source heat pump1)HIGH EFFICIENCY COP
2)FAMOUS SCREW COMPRESSOR
3)CE&ISO9001
4)3 USAGE FOR ONE UNIT
standard screw ground source heat pump(35RT-700RT)
SCREW HEAT PUMP CENTRAL AIR CONDITIONER(35RT-700RT)
1.Standard Type (LTLHM(R)-):
Cooling capacity: 130-3240kw (11.2×104kCal/h~278.6×104kCal/h OR 443,600Btu/h~11,060,000 Btu/h)
EER up to 5.3
Heating capacity: 142-2632kw (12.2×104kCal/h~226.4×104kCal/h OR 484,500Btu/h~8,060,000 Btu/h)
COP up to 4.0
2. Compressor: Screw
3. Evaporator&Condenser: Famous brand
4. Power: 3/N/PE AC380V/220V (±10%) 50/60HZ (designed as per request)
5. Refrigerant: Environmental protection refrigerants (R134a R407c or R410a)
6. Noise: ≤75dB (A)
STANDARD DOUBLE CONDITIONS SCREW HEAT PUMP CENTRAL AIR CONDITIONER,
LUTE HEAT PUMP BUILD THE MOST ENERGY-EFFICIENT WORLD
Competitive Advantages
1. Wide range of application:
radiant floor, radiator, fan coil units and other refrigeration, heating and sanitary system to take clean water.
2. Green:
The pollution-free environment-friendly refrigerant, run-time without waste discharge, heating can replace the boiler room, there is no combustion process, to avoid the smoke pollution, eliminating the need for cooling when the cooling tower, to avoid cooling noise and pollution tower mold, so that more fresh and beautiful environment.
3. Stable and reliable operation:
Equipped with advanced protection units in various working condition. Piping used in all gas welding process, welding caused the elimination of oxides and impurities to improve unit cleanliness.
Notes:
1. Unit cooling capacity and compressor power consumption calibration conditions:
chilled water inlet temperature 12°C, outlet water temperature 7°C
Cooling water inlet temperature 18°C, outlet water temperature is 29°C.
2. Unit heating capacity and compressor power consumption calibration conditions:
hot water INLRT temperature 40°C, the outlet water temperature is 45°C
Cooling water inlet temperature 15°C, outlet water temperature 7°C.
3. When the cooling water temperature range is different from the calibrate mode, press the design performance curves to select their unit refrigeration / heat and power consumption;
4. Heat recovery can be added with requirements.
FINISHED PRODUCTS:
Send Inquiry to This Supplier
You May Also Like
-
Air Flow 6000M3/H Portable Air Cooler Air CoolerNegotiableMOQ: 1 Set
-
Fiberglass Reinforced Plastic Air Ducts, Inorganic Fiberglass Reinforced Plastic Air Channels, Organic Fiberglass Reinforced Plastic Ventilation DuctsUS$ 24.62 - 27.69MOQ: 1 Meter
-
4-way Cassette Fan Coil UnitNegotiableMOQ: 1 Piece
-
Industrial Air Conditioner and Air Conditioning System Manufacturer in ChinaNegotiableMOQ: 10 Sets
-
Industrial Air ConditionerNegotiableMOQ: 1000 Sets
-
APP Control Mist Free Humidifier，0 Fog Ultrasonic Humidifier，Evaporative Humidifier/demineralizerNegotiableMOQ: 1000 Pieces
-
Cutting Tools Kit With Aluminum Carrying Case For Phenolic Foam Insulation Sheet Board Duct Good PriceNegotiableMOQ: 1
-
Small Steel Hatch Cover Easily Operating Experienced ManufacturerUS$ 0.5 - 11.9MOQ: 500 Pieces
-
Class 100 Cleaniness FFU With Low Noise for Ultra-clean SpaceUS$ 1 - 1MOQ: 1 Set
-
Mini Air ConditionNegotiableMOQ: 1000 Pieces
