no Pollution Dust/powder/stive Humidification Mixer
Specifications
FJQ dust mixer:1.environment-friendly
2.can be used in many industry
3.easy operation and long working life
4.no pollution
Introduction of the Dust/Powder/Stive Humidification Mixer:
The FJQ Series Dust/Powder/Stive Humidification Mixer manufactured by our factory is mainly applied to humidifying and mixing dust which is discharged from the underneath of the bag house to prevent dust spilling over and avoid produce secondary pollution on the environment. The function of Dust Humidification Mixer is to humidify and mix fine dust, and then centrally store and process the fine dust. The Dust Humidification Mixer is the effective method and equipment to solve the secondary dust discharging problem of the bad house. It’s more environment-friendly and greener.
Feature of the Dust/Powder/Stive Humidification Mixer:
1.FJQ Series Twin Shaft Dust/Powder/Stive Humidification Mixer use speed-reducer drive, running smoothly and low noise
2.Twin shaft Dust/Powder/Stive Humidification Mixer has reasonable structure: feeding inlet on the top and discharge outlet in the bottom
3.Junction surface is sealing well, no dust leaking and running smoothly.
4.Twin shaft Dust/Powder/Stive Humidification Mixer is equipped with water spray system to ensure the uniform distribution of water spraying and adjust water supply to meet the demand
5.Adopting the oil hand pump to supply lubricating grease for the four drive bearings, which is convenient to use and maintenance. It’s more effective and time-saving.
6.Easy operation and less occupied area.
7.Uniform mixing, no residual and long working life.
Major occasion of application:
1.The secondary dust humidification for the bag house in the asphalt mixing equipment
2.Recycling dust humidification for bag house in the power station
3.Dry powder mixing ( no adding water)
4.Building materials mixing ,such as putty powder
FJQ Series Dust/Powder/Stive Humidification Mixer Technical Parameter:
Model |
Capacity(T/H) |
Power(kw) |
water content |
water-spraying pressure(MPa) |
Structure |
Remark |
FJQ15 |
10-20 |
7.5 |
15-20% |
0.4-0.8 |
Twin shaft |
|
FJQ25 |
20-30 |
11 |
15-20% |
0.4-0.8 |
Twin shaft |
|
FJQ35 |
30-40 |
15 |
15-20% |
0.4-0.8 |
Twin shaft |
|
Factory Picture:
Send Inquiry to This Supplier
You May Also Like
-
Wear-resistant DN125 Concrete Pump Pipe With Flange Coupling for High-pressure Concrete DeliveryNegotiableMOQ: 50 Pieces
-
Skid Steer Rotary Broom Sweeper Attachment for Road and Site CleaningUS$ 1300 - 1500MOQ: 1 Piece
-
NAME: PIN PN: 4110001903106. APPLY FOR SDLG MOTOR GRADER G9190 G9200 G9220.US$ 5 - 8MOQ: 1 Unit
-
Engineering & Construction Machinery PartsNegotiableMOQ: 2500 Sets
-
Filter Element 4120000723001 for SDLG Wheel Loader Genuine OEMNegotiableMOQ: 1 Piece
-
Excavator Foot Valve E312 E320 E320B PartsNegotiableMOQ: 1 Blade
-
Chromium Carbide Overlay Wear Plate Excavator Crusher Bucket LinerUS$ 399.69 - 399.69MOQ: 1 Square Meter
-
48-17 Excavator Spare Part for Pump Drive System YNF18405NegotiableMOQ: 1 Piece
-
Excavator Piston Pump PC05-6 PC20 PC30 PC200-6 PC200-7 PC220 PC240 PC400 PC450 High Pressure Hydraulic Pump for KomatsuNegotiableMOQ: 1 Combo
-
Connector Sealing up Pipe Stop Water Hexagon Threaded Protection Hard PlugsNegotiableMOQ: 100 Pieces

