Contact Platform Support
Help CenterZ10 Keyless Bushing
Related Products
-
Z11 Keyless Bushing/locking DeviceUS$ 29 - 300MOQ: 10 Sets -
Z6 High Quality Keyless Bushing/ringfender/KTR RingblokUS$ 10 - 100MOQ: 10 Sets
-
Z18 Self Lock Keyless BushingUS$ 10 - 290MOQ: 10 Sets
-
Z17 Steel Keyless BushingUS$ 10 - 190MOQ: 10 Sets
-
Z19 High Power Transmission Steel Keyless Bushing TLKUS$ 10 - 400MOQ: 10 Sets
Tanso Shaft Locking Devices connect hubs solidly to shafts, using a keyless mechanical interference fit, to transmit torque or to withstand axial thrust. This mechanical interference fit utilizes screw tension in the Shaft Locking Device, converted into radial pressure via an inclined plane. This pressure expands the Shaft Locking Device to eliminate the gap between the hub and the shaft. The Shaft Locking Device uses the friction bond between the Shaft Locking Device and the shaft/hub to create a zero backlash connection. This connection is easily releasable to remove the mechanical interference fit.
Tanso Shaft Locking Devices expand to fill the gap between the shaft and hub, allowing for easy installation and removal, saving time over traditional interference fit techniques. The contact pressures created using a Shaft Locking Device can be greater than traditional interference fit pressures, allowing for more torque to be transmitted or shorter hubs to be used. The easy installation also allows the hub to be positioned more accurately on the shaft, and can facilitate angular timing of the hub.
Easy assembly and disassembly
Both actions take place by locking and unlocking the clamping screws with common tools.
The use of a torque wrench is only necessary when a more precise torque is required.
Superior holding power
The action of the clamping cones creates shaft clamping torque superior to a normal keyed hub.
Overload protection
When the pre-set torque is exceeded locking device will slip, preventing the connected elements from being broken.
Note: Locking units are not friction couplings, so excessive slip will cause damage.
Easy adjustment
Combining the locking device design of smooth cone action with superior holding power, the hub can be clamped at any position along a shaft, eliminating the need for lock washers, spacers , stop rings, etc.
Specific product description
Features:
1.Zero backlash
2.Reduced shaft stress
3.High contact pressure for greater torque
4.Easily installed and removed
5.Elimination of keyways or splines
6.Unlimited shaft positioning
7.All units are pre-assembled and ready to install
Z10 type keyless bushing
Specification:
Send Inquiry to This Supplier
You May Also Like
-
Heavy-Duty Spline Gear Shaft Coupling With Integral Flange for Mining MachineryNegotiableMOQ: 1 Piece
-
CouplingNegotiableMOQ: 2300 Pieces
-
Slip Clutch Coupler for Packaging Machinery 20Nm Torque Limit as Shaft CouplingNegotiableMOQ: 1 Piece
-
Star Unloader Rotary Air Lock Valve Impeller Discharge Feeder With 1 Year WarrantyUS$ 199 - 200MOQ: 1 Combo
-
YZ40281578 OEM Disc Nylon Flange Rigid Type 2000 N-M Rated Torque Crankshaft Coupling Assembly for Excavator FlywheelUS$ 40.00 - 60.00MOQ: 2 Pieces
-
ESCO Coupling Diaphragm CouplingNegotiableMOQ: 1 Set
-
Custom Precision GR38 Steel Flexible Coupling Black Keyway Transmission Anti Vibration Rotex Curved Jaw Coupling for BlenderNegotiableMOQ: 1
-
Customized Universal Drive Shaft CouplingUS$ 38 - 40MOQ: 10 Pieces
-
Flexible Drive Shaft Fits Any Electric Drill Auto Repair ToolUS$ 1 - 30MOQ: 500 Pieces
-
Cast Iron Shaft CouplingNegotiableMOQ: 1 Piece
