Contact Platform Support
Help CenterSolvent-free Non-flammable Moisture and Weather Resistant Two Component Polyurethane Flooring Adhesive
Related Products
-
Water-based Polymer Adhesive & Pvc Flooring Glue & Environmental AdhesiveUS$ 2.5 - 2.8MOQ: 1000 Kilograms -
Polyurethane Adhesive for FloorUS$ 34.8 - 35.5MOQ: 1000 Kilograms
-
Pvc GlueUS$ 2.5 - 2.8MOQ: 1000 Kilograms
-
Heat Resistance Polyurethane AdhesiveUS$ 6.3 - 7MOQ: 500 Kilograms
-
Weather Resistant Polyurethane Adhesive for FloorUS$ 4 - 7MOQ: 120 Kilograms
Specifications
suitable for indoor and outdoor applications ,with good adhesionresistant for moisture and chemical materials,easy operation
Field of Application:
Gu803 us a solvent-free non-flammable, moisture and weather resistant two part polyurethane adhesive suitable for indoor and outdoor applications,(e.g. Regupol, polygars, Astroturf and etc.), needle felt in particular for adhering flooring materials onto concert slabs on ground.
It is recommended for laying synthetic rubber tiles (e.g. Pirelli, Freudenberg, Pegulan), outdoor flooring materials such as Regupol, Polygras, Astroturf etc. and needle felt, carpets, flex tiles, concrete, glass, ceramic, quarry tiles. Expanded polystyrene, wood panels, chipboard, softboard, plywood, hardboard, fibre/cement sheet and metails. Tests should be carried out prior to installing synthetic rubber tiles to assure suitability.
Gu803 is also suitable for adhering gripper rods wall to wall carpet installations and can be used to fill cracks in cement screeds, performed stair treads and nosing.
Characteristics:
- GU803 is a solvent-free, good moisture and weather resistant two part polyurethane adhesive suitable for indoor and outdoor applications
- GU803 shows great advantage of easy operation
- GU803 is particularly applied to adhering flooring materials of public place with good adhesion
- GU803 is resistant for moisture and chemical materials
- GU803 is non-flammable
Technical data:
|
Gu803A |
Gu803B |
Component |
Polyol filler |
Isocyanate |
Appearance |
White viscous fluid |
Brown liquid |
|
Viscosity CPS Brookfield |
300,000—600,000 (50°C 4# RPM 1 ) |
100-300 (25°C 2# RPM 30 ) |
Density |
1.6+0.1 |
1.2+0.1 |
Dosage |
500-700G/m2 |
|
proportion |
Gu803A: Gu803B=5:1 |
|
Subfloor Preparation:
The subfloor must be dry, level, smooth, structurally sound and free from grease, dirt, dust, paint, was and etc. Old adhesives must be removed wherever possible. Bitumen based adhesives and sealers must be removed. Dry ,dusty or porous sublfoors may be treated with a suibtale primer/sealer. Allow primer to dry thoroughly before applying Gu803 adhesive.
Directions for use:
The quantities are at a rotio of 5:1 (resin:hardener). It is important to observe the correct amounts of resin and hardener. Stir the hardener thoroughly into the resin until a uniform grey colour is obtained. For the best results use an electric drill with paddle attached. Minimum mixing time is 2 minutes. Pour but do not scrape the adhesive out of the mixing bucket. Use the adhesive within 30 minutes of mixing 20°C. Curing is dependent on atmospheric conditions and will be retarded considerable ant temperatures below 10°C.
Send Inquiry to This Supplier
You May Also Like
-
Silicone & ProductsNegotiableMOQ: 2400 Kilograms
-
Solvent Based Thermoplastic TPU Adhesive for Fabric and Garment ApplicationUS$ 2.22MOQ: 1 Kilogram
-
50ml Loctite Screw Glue 290 Penetrating Medium Strengthanti-loose Metal Thread Locking Agent 222 243 242NegotiableMOQ: 1 Bag
-
Low Temperature Hot Melt Adhesive for Baby Diaper and NapkinsUS$ 2.8 - 3.2MOQ: 1 Ton
-
2016 Zhengzhou Factory Natural Artificial Stone Mold for Making Artificial StoneUS$ 1 - 30MOQ: 1000 Pieces
-
Hot Seal de High Quality Silicon Rubber Bushing From China O RingsUS$ 0.1 - 10MOQ: 100 Pieces
-
Aluminum Foil Self-adhesive TapeNegotiableMOQ: 100 Rolls
-
Glue Stick, Hot Melt Glue Stick, Glue Gun StickUS$ 2.9 - 2.9MOQ: 100 Kilograms
-
8 Pieces in a Pack Super GlueUS$ 0.33 - 0.33MOQ: 1800 Sets
-
Mmodified Corn StarchUS$ 675 - 705MOQ: 10 Tons
