Low Carton Steel Spiral Type Steel Fiber
Item Name: Low Carton Steel Spiral Type Steel Fiber
Company introduction:
Chongqing Joywell Trade Co.,Ltd is an professional foreign trade company which was founded in 1999. We are on the market of building materials more than 14 years, obtained a good feedback both in domestic and overseas. There are kinds of steel fibers: melt extract stainless steel fiber, hooked ends cold drawn steel fiber, crimped steel fiber, cutting steel fiber, cutting micro steel fiber, copper coated steel fiber etc. Should you have any interests or suggestions, pls don’t hesitate to contact us directly.
What’s steel fiber?
Steel fibres are filaments of wire, deformed and cut to lengths, for reinforcement of concrete, mortar, cement slurry and other composite materials. They have anti-crack, anti-bend, anti-wear, anti-shear, anti-twist, anti-fatigue,stretching resistance, abrasion resistance characters. Widely be used in industry, military,construction, machinery, metallurgy, petrifaction, pottery areas.
Wide range of applications:
Highway pavements/road overlays Airport runways and taxiways Bridge/tunnel/mine
Composite metal decks Equipment foundations Concrete/shotcrete
Blast resistant structures Hydrodynamic structures Railway sleeper
Industrial ground floor slabs Dam and stabilization Spray anchor
Commercial and residential slabs Shock resistance structure Cemetery/cesspool
Army construction Mix with refractory Seismic design
How to use?
1.To put steel fiber and mixing stuff into mixer to mix 30---60 seconds, the steel fiber will distribute equally in mixing stuff to avoid agglomerate.
2.Then to put sand and concrete into mixer to mix 30—60 seconds.
3.Finally to add water into the mixer to turn and mix 2-3minutes.
4.To transport them to working place.
Caution:
To minimize the risk of minor injury when handling or finishing mixes containing steel fibers, gloves should be worn. Gloves of similar quality to those normally worn by concrete placing and finishing crews are adequate. The use of gloves and eye protection during loading of steel fibers to mixer is recommended.
The character of steel fiber materials for construction
The steel fiber mainly uses in concrete material.The steel fiber concrete is a new type of compound material through rapidly developing since recent twenty years,because the material is added with uniform distributing short steel fiber compound material.It has good crazing-resistance,anti-freezing,antibend,antiwear,washing-resistance etc.It has not only the good character of the normal concrete,but also it makes fragile concrete show good ductility and toughness,as well as nice anti-freezing,antiwear etc.
Classification by the shape of the steel fiber construction materials
Physical,Chemical Properties and Specifications of Steel fiber construction materials
Packing:
in 25kg kraft bag lining plastic woven bag .
Our convincing certificates:
Send Inquiry to This Supplier
You May Also Like
-
Cast Iron Trench Drain Cover, 1/2" Thick, Load Class E600, 24"x12" Solid Grate for Industrial UseNegotiableMOQ: 300 Square Meters
-
HPL Panel (clean Room)NegotiableMOQ: 100 Square Meters
-
Steel Grating for Drainage, 25x3mm Flat Bar, 30x30mm Mesh, 1000x500mm, Hot Dip Galvanized, Slippery ResistantNegotiableMOQ: 50 Cubic Centimeters
-
SOURCE POLYURETHANE SANDWICH PANEL FactoryNegotiableMOQ: 100 Pieces
-
Sandwich PanelNegotiableMOQ: 2500 Pieces
-
Corrugated Metal Cladding Panel 0.7mm Zincalume Steel for Roof and Wall SystemsNegotiableMOQ: 1 Square Meter
-
Hot Rolled ISO9001 CE JIS Certified Carbon Steel Seamless Pipe Coated Modern OD 5mm/6mm A106 Q345 Q235 for Oil ApplicationsNegotiableMOQ: 1 Ton
-
Hot Dipped Galvanized Diamond Metal Lath Expanded 2-1/2-gauge Steel Sheet Anti-Corrosion Durable Low Cost Roofing Wall FloorUS$ 1.7 - 3.2MOQ: 1 Piece
-
High Purity Zirconia Ceramic Ring 8mm OD With 1500 MPa Flexural Strength for Valve SealsNegotiableMOQ: 1 Piece
-
pu Wall Sandwich Panel Rigid Insulation Polyurethane Foam BoardNegotiableMOQ: 1








