Contact Platform Support
Help Centersd Card Pixel Rgb Controller T-8000 for 8192 Pixels Led Light
Related Products
-
SD Card Offline Control 8 Output Ports Pixel Led Controller T-8000US$ 85.5 - 86MOQ: 1 Piece -
T-8000C Led Pixel Controller,with SD Card;DC5V Input,suppor Many Kinds of IC 8192pixel(8 Ports,each Ports Support 1024pixels)US$ 85.5 - 86MOQ: 1 Piece
-
Dmx Rgb Led Controller,SD Card Led Controller,RGB Pixel Controller 8192/4096/2048 PixelsUS$ 66 - 66.5MOQ: 1 Piece
-
T-4000 SD Card Rgb Led Pixel ControllerUS$ 66 - 66.5MOQ: 1 Piece
-
Programmable Led Pixel Light T-4000 ControllerUS$ 66 - 66.5MOQ: 1 Piece
sd card pixel rgb controller t-8000 for 8192 pixels led light
T-8000C System features
1,32—256 Gray level,Support software Gamma correction.
2,Support the rules and special-shaped handle.
3,Eight--port output,every port can support 512-1024 pixels.
4,Offline (SD Card) control ,can be multiple controllers used in combination, play back content stored in the SD card.
5,Compatible with single and dual IC, if you control a single line IC LED lights, without being connected to the CLK line.6,New T-8000C have a screen, The controller can be encrypted to limit the times of use.
NOTE1. When T_8000C controller control less than 512 lamps the frame rate can reach 30fps. When T_1000 controls more than 512 lamps and less than 1024 lamps the frame rate will slow down automatically.
2. In the 2012 production version of the T_8000C to add a Chinese flag on the surface, you must use the new software.
Support chips
The meaning of flag
Mode of connection
NOTE:
If the distance between controller and lamps more than 50m we suggest using differential signal transmission control or Photoelectric isolated signal transmission control,please read the manual carefully. Signal lines must be a cable,the best is Super five kinds of cable.
Specific parameters:
Memory card:
type:SD card(suggest using high-speed SD card)
Capacity:128MB—2GB
Format:FAT
Store file Format:*.led
Physical parameters:
Working temperature :-30℃—85℃
Working voltage:DC5V
Working power:3W
Size:L200mm×W170mm×H50mm
Weight:1.5KG
Signal port:3pin connect port
NOTE:Before copy files to SD card ,The SD card must be formatted as FAT format
The SD card in controller can not be hot_swappable, plug the SD card every time, you must first disconnect the power supply
Product Show
Trouble shooting
Question 1 After power, the T_8000C ERROR indicator has been flashing without display output
answer The ERROR indicator has been flashing means the controller did not read the card correctly, possible problems:
1 SD card is empty, with no effect file.
2 The effect file in the SD card and the controller model are not match, please choose correct controller model in LedEdit and then re-create the effect file *led.
3 SD card did not format to FAT before copy effect files.
4 Please check the supply power voltage, the controller can be individually powered to exclude power reasons
5 Changing the SD card and then test to exclude the possibility of a bad SD card
Question 2 The controller is powered on, the indicator is normal, but the lamps have no effect change
Answer The reasons for this are as follows:
1 Check if the lamp′s signal line and the controller connected correctly
2 If the TTL signal is received, the lamp and the controller must be common ground, that means connect the lamp′s and the controller′s ground wire together
3 Check if the model chose during making display files on the SD card match the chips used in the lighting
Question 3 Controller and light connected, after. Lamps flicker. Controller indicator to normal.
Answer
1 The ground wire is not connected between the controller and lighting.
2 The file in SD card is bad, Chip model does not match with the actual.
3 Insufficient power supply.
Question 4 The SD card can not be formatted.
Answer 1 First make sure the SD card on the side of the protection switch is already open.
2 SD card reader is broken
3 Do all of this can’t deal with the question. Change the SD card tests again.
Send Inquiry to This Supplier
You May Also Like
-
Dimmer SwitchUS$ 2 - 5MOQ: 20 Pieces
-
Led Light RF-MINI DimmerUS$ 2 - 2.8MOQ: 10 Pieces
-
High Quality DMX Controller 240 Disco10w Stage Lighting ControllerUS$ 63 - 100MOQ: 1 Piece
-
Dimmer ModulesNegotiableMOQ: 1
-
192Channel DMX512 LED Controller Console for Led Stage LightUS$ 10 - 30MOQ: 1 Piece
-
Electrical Switches Light DimmerNegotiableMOQ: 500 Pieces
-
Touch Screen Incandescence Lamp Micro Dimmer SwitchUS$ 30 - 50MOQ: 1 Piece
-
RF 2.4G 4 Channel LED Remote(Remote A)NegotiableMOQ: 1 Piece
-
DJ Light, DMX Console, 768 Channel DMX ControllerNegotiableMOQ: 2 Pieces
-
Wuxi Factory Workshop Lighting Retrofit Energy-saving Device Sjdz-0.38-50 Sjdz-0.38-100US$ 152.31 - 153.69MOQ: 1 Piece
