Contact Platform Support
Help CenterRotary Printing Screen Photo Emulion in Chemical
Related Products
-
Silicone Oil for SaleUS$ 2 - 50MOQ: 100 Kilograms -
Silicone Oil Uses in Textile PrintingUS$ 2 - 50MOQ: 100 Kilograms
-
Silicone Oil for TextileUS$ 2 - 50MOQ: 100 Kilograms
-
Dimethyl Silicone Oil for TextileUS$ 2 - 50MOQ: 100 Kilograms
-
Amino Silicone Oil for Polyester, CottonUS$ 2 - 50MOQ: 100 Kilograms
Specifications
rotary printing screen photo emulion in chemicalmilky white
good drability of printing
suitable for rotary printing screen a
rotary printing screen photo emulion in chemical
Milk white, light blue or pink emulsion, for making rotary screen stencil
good durability of priting and excellent accuracy of stencil making.
suitable for squeegee or magnetic rotary sreen priting machine.
Application:
1, Washing the screen:
Immerse the screen into cleaning liquor for around 10 minutes, take out and rinse with water, then dried at low temperature in an oven. At the same time, prevent the screen from being stained with dirt.
2. Preparing the photosensitive emulsion:
It should be operated under a gentle yellow light( prohibit from operating without opacifying). 40-50ml of photosensitizer solution is added into 1000g of photoemulsion, stir clockwise until to homogenous, stand for 1-2 hours to let off bubbles in a cool and dark place. Thenmaintain the prepared photoemulsion at 5-10 in a constant temperature storage box(A seal cover is needed to avoid skinning)
3. Coating:
300g of the prepared emulsion is added into a clean scraper ring and coated on the clean screen with a speed of 10-12cm/min, then drie at 35-40 and 60% relative humidity in an oven with circle wind and no more than 2 temperature differences.
4. Exposure:
Fixed the coated screen on an exposure machine and fit the manuscript closely
The fit time should be determined after trial. Reference time: 5-8 times on a scanning machine or 1-3 minutes on a stationary exposure machine.
5. Developement:
The exposed screen should develop timely by putting it in water at 5-30 for approx. 3-5 minutes, then washed until patterns appear clearly, then rinse off the leaked emulsion with water under low pressure, and dried at 50-60 in a constant temperature oven.
6. Curing:
Curing the retouched screen at 180 for 2 hours in a constant temprature oven until the film becomes golden, then take out to bind with endring after cooling down.
Above information for reference only.
Model |
Use for |
| SE105 | ROTARY PRINTING SCREEN |
| SE101 | SQUEEGEE |
Product picture
Focus on texttile printing articles only, any interested in, pls contact with me freley.
Send Inquiry to This Supplier
You May Also Like
-
Other Printing MaterialsNegotiableMOQ: 2600 Sets
-
Polyester Mesh for Silk Screen Printing, 200 Mesh, 0.07mm Opening, Low Elongation for PrecisionNegotiableMOQ: 1 Square Meter
-
Rubber Plastic Blade ScraperUS$ 1.85 - 3.5MOQ: 1 Piece
-
News Printing PaperUS$ 340 - 390MOQ: 40 Metric Tons
-
M2000 Stitching Head PlateUS$ 1 - 10MOQ: 1 Piece
-
Carbonless Paper With Hole and ClawUS$ 20 - 35MOQ: 100000 Sets
-
75um PP Synthetic Adhesive Paper for Inkjet Printing LabelsUS$ 0.27 - 0.31MOQ: 20000 Cubic Meters
-
Factory Sale Directly Aluminum Holder Screen Printing Squeegee Handle for Manual Screen PrinterUS$ 5 - 20MOQ: 1 Unit
-
PET Film Grey Back Roll Weight 340gsm 440gsm 91cm Wide For Banner StandUS$ 53MOQ: 50 Rolls
-
Crystal/WT-T01: Crystal Film Acrylic Film Photo Protection Film Cold Lamination Film for Wedding Album Wedding Frame Wall Frame Laminated RollNegotiableMOQ: 1000 Square Meters
