BOPP Thermal Lamination Film
Specifications
glossy and matteSurface layer: BOPP
glue layer: EVA adhesive
SPECIFICATION & PARAMETER
- Surface layer: BOPP
- glue layer: EVA adhesive
- Thickness: GLOSSY: 25μm(12+13) 27μm(15+12) 30μm(18+12)
- MATTE: 27μm(15+12) 30μm(18+12)
- Width: 310~1880mm
- Length: 100~3000M
- Paper core: 25.4mm (1 inch),58mm(2.25inches),76mm(3 inches)
- BONDING: less than 2
Process Parameter:
- Equipment for thermal film: dry and wet film laminator
- lamination temperature: 95~105°C
- Roller pressure: 10-20Mpa
- Speed: 8-20 m/min
Directions for using BOPP thermal laminating film:
- Normal process temperature is 90°C-105°C, roller pressure and temperature vary with different types of paper, ink and machines.
- When using the film for the first time or do other treatment, try a small volume before mass laminating.
- Make sure the ink is dry before laminating. It will delaminate when the paper contains too much moisture and powder.
- Make sure put the material in a low-temperature, dry place.
Send Inquiry to This Supplier
You May Also Like
-
Ultra-Transparent Heavy-Duty BOPP Tape - Waterproof & High Tensile Strength for Carton SealingNegotiableMOQ: 1000 Kilograms
-
Barbed Tape With 2-Year Warranty, Mill Test Report Provided, 0.5mm Thickness, 25mm Width, Standard CompliantNegotiableMOQ: 50 Acres
-
Hook and Loop Adhesive TapeNegotiableMOQ: 400 Rolls
-
Packing TapeNegotiableMOQ: 2500 Rolls
-
Black PE Conductive Roll Material for Industrial Packaging ApplicationsNegotiableMOQ: 100 Kilograms
-
2016 NEW Product Diaper Use Adhesive Side TapeUS$ 0.5 - 1MOQ: 200000 Square Meters
-
Pressure Sensitive Foam Seal for BottleNegotiableMOQ: 1 Piece
-
Fire-proof no Moldy Fiberglass Joint Tissue TapeUS$ 0.08 - 0.18MOQ: 10000 Square Meters
-
Adhensive TapeUS$ 0.2 - 0.35MOQ: 2400 Sets
-
Crepe Paper TapeNegotiableMOQ: 100 Rolls