Back to Back Strut Channel
Back to Back Strut Channel
Features:
1) P41series strut channel are manufactured from Q235/Q215 with galvanized finish or epoxy coating.
2) Wall thickness is 2.5mm, standard delivery length is 3m or 6m.
3) Wall thickness can be 2.0mm and 1.5mm for light hanging system, for beam load capacity, use 80% and 60% of appropriate load chart separately.
4) When P41 series are used as beam, multiply uniformly distributed load from the table by 0.5 for concentrated load and corresponding deflection by 0.8.
5)Channels with side ribs, for beam load capacity, use 120% of appropriate load chart separately.
Send Inquiry to This Supplier
You May Also Like
-
Cast Iron Trench Drain Cover, 1/2" Thick, Load Class E600, 24"x12" Solid Grate for Industrial UseNegotiableMOQ: 300 Square Meters
-
HPL Panel (clean Room)NegotiableMOQ: 100 Square Meters
-
Flat Metal Barbecue Net 304 Stainless Steel With 12-Month Warranty and Mill Test ReportNegotiableMOQ: 1 Blade
-
SOURCE POLYURETHANE SANDWICH PANEL FactoryNegotiableMOQ: 100 Pieces
-
Galvalume Steel Metal Wall Panel 0.5mm Thickness Anti-corrosion PVDF Coating for Industrial PlantsNegotiableMOQ: 1 Ton
-
Hot Rolled ISO9001 CE JIS Certified Carbon Steel Seamless Pipe Coated Modern OD 5mm/6mm A106 Q345 Q235 for Oil ApplicationsNegotiableMOQ: 1 Ton
-
High Purity Zirconia Ceramic Ring 8mm OD With 1500 MPa Flexural Strength for Valve SealsNegotiableMOQ: 1 Piece
-
Sandwich PanelNegotiableMOQ: 2500 Pieces
-
Hot Dipped Galvanized Diamond Metal Lath Expanded 2-1/2-gauge Steel Sheet Anti-Corrosion Durable Low Cost Roofing Wall FloorUS$ 1.7 - 3.2MOQ: 1 Piece
-
pu Wall Sandwich Panel Rigid Insulation Polyurethane Foam BoardNegotiableMOQ: 1