Contact Platform Support
Help CenterChannel Steel Metal Building Materials
Related Products
channel steel metal building materials
Our products:
1. P41 series are manufactured from hot-rolled low-carbon steel with galvanized finish or epoxy coating. Wall thickness is 2.5mm, standard delivery length is 3m or 6m.
2.Wall thickness can be 2.0mm and 1.5mm for light hanging system, for beam load capacity, use 80% and 60% of appropriate load chart separately.
3.When P41 series are used as beam, multiply uniformly distributed load from the table by 0.5 for concentrated load and corresponding deflection by 0.8.
4. P41 series are also available in stainless steel on special order.
Usage:
Strut channel is used to mount, brace, support, and connect lightweight structural loads in building construction. These include pipes, electrical and data wire, mechanical systems such as ventilation, air conditioning, and other mechanical systems. Strut channel is also used for other applications that require a strong framework, such as workbenches, shelving systems, equipment racks, etc.Specially made sockets are available to tighten nuts,bolts etc. inside the channel,normal sockets are unable to fit through the opening.
Category:
(1) C profile steel
(2) U profile steel
(3) angle profile steel
(4) Channel Combination
Package:
Transportation:
Send Inquiry to This Supplier
You May Also Like
-
Cast Iron Trench Drain Cover, 1/2" Thick, Load Class E600, 24"x12" Solid Grate for Industrial UseNegotiableMOQ: 300 Square Meters
-
HPL Panel (clean Room)NegotiableMOQ: 100 Square Meters
-
SOURCE POLYURETHANE SANDWICH PANEL FactoryNegotiableMOQ: 100 Pieces
-
Press Locked Steel Grating, 40x40mm Aperture, 5mm Flat Bar, Load Capacity 4kN/m², Standard CompliantNegotiableMOQ: 50 Cubic Centimeters
-
for Industrial Warehouse Cladding: Galvanized Metal Wall Panel, Wind Load up to 150km/hNegotiableMOQ: 1 Square Meter
-
Ex-factory Price Q195 Q235 AiSi ASTM Hot Rolled 1.5mm 1.6mm Low Carbon Steel Coil Modern Durable Boiler Plate Welding CuttingNegotiableMOQ: 1 Ton
-
Hot Dipped Galvanized Diamond Metal Lath Expanded 2-1/2-gauge Steel Sheet Anti-Corrosion Durable Low Cost Roofing Wall FloorUS$ 1.7 - 3.2MOQ: 1 Piece
-
High Purity Zirconia Ceramic Ring 8mm OD With 1500 MPa Flexural Strength for Valve SealsNegotiableMOQ: 1 Piece
-
Sandwich PanelNegotiableMOQ: 2500 Pieces
-
pu Wall Sandwich Panel Rigid Insulation Polyurethane Foam BoardNegotiableMOQ: 1
