Contact Platform Support
Help CenterSplice Hot Jointer
Related Products
-
Low Volume Hot Air Jointer MachineUS$ 348 - 378MOQ: 1 Set -
New Style Banner Splicing MachineUS$ 300 - 368MOQ: 1 Set
-
Professional Supplier Hot Air JointerUS$ 238 - 268MOQ: 1 Set
-
Top-3000C Automatic Stretch Tent PE Welding MachineUS$ 560 - 630MOQ: 1 Set
-
Hot Air PVC Banner Fabric Welding MachineUS$ 268 - 348MOQ: 1 Set
Specifications
plastic welding Machine can join disjunct advertising poster surface without mucilage.welding machine specification:
(1) When work, the operation is slow and is not too satisfied in strength with the glue, to get a good strength, usually we must proceed a special handling, such as whet the surface to make the surface not smoothed, so it may cost more workers
(2) The air temperature may influence the stick strength, in low temperature environment, the bond effect maybe bad.The Heat-Jointer Machine Without Mucilage, will be a more efficient companion for advertising material instead of the 502 glue.
(3) It can nicely solve the above existent problems, and may save more manpower and work field, for example, a PVC jointed painting with 200 meters long surface can be easily coalesced together and well matched, all the works can be well finished by a single person on only a heat-resistant and smooth base ground about 30 square meters.
(4) The machine is designed self-moveable, the volume is small, the whole weight only 9 kilogram, the work temperature and self-move speed is adjustable;
(5) The HEAT JOINTER Machine, to join disjunct poster banner without mucilage, is constructed simple, easy to maintain, The volume is small, the whole weight only 9 kilogram, the work temperature and self-move speed is adjustable; the operation is also simple,and needs not much guide to operate.
(6) Immobilise both ends of each disjunct poster surface with something such as stick belt or clamp, and leave about 30-40mm wide overlap edge on each disjunct poster surface edge
(7) Turn on the machine, prepare warm up about 2 minutes
(3) Bring up the machine, and place the roll at the end of the overlap edge
(4) According to quality and thickness of the poster surface material, consider the ground circumstance, adjust the proper temperature and speed, handle the Fuse machine Gun down and insert it between the two poster banner edges, then the machine start running, after go pass the overlap edge, the two disjunct banners will be well joined in one.
Application:laminate and bond up disjunct flat painting surface made of heat-melted material, such as outdoor advertising poster,PVC cloth & PE fabric Canvas, outdoor poster banner,plastic surface, Sailcloth...etc.
Specification parameter:
1) Alternant electric voltage 220V/50Hz;
2) Upper limit power 2000W, average 800W;
3) Adjustable work temperature 50-600°C;
4) Adjustable self-move speed 0.8-15M/per minute;
5) Whole weight 10 kilogram;
6) Size 40cm*30cm*28cm.
Send Inquiry to This Supplier
You May Also Like
-
Industrial Grade PET Printing Screen Mesh 200 Mesh 30% Open Area 1.0mm Thickness Consistent TensionNegotiableMOQ: 1 Square Meter
-
Colorful Advertising Small Plastic POP Sign Holder ClipsUS$ 0.3 - 0.58MOQ: 200 Pieces
-
Mpled IP68 Waterproof Outdoor Led Rental DisplayUS$ 1,140 - 1,960MOQ: 5 Square Meters
-
BHNBTXC1 Advertising Banner StandNegotiableMOQ: 10 Pieces
-
Safety Triangle Advertising Waming Flashing Emergency TriangleUS$ 1 - 1MOQ: 10 Pieces
-
Indoor 1920*1080 High Bright LCD Video Wall With Low PriceUS$ 583 - 2,833MOQ: 2 Pieces
-
Solid and Reliable Floor for Animal HouseUS$ 1 - 6MOQ: 100 Units
-
Customized Stickers, Car Body Sticker, Phone Sticker, Window StickerUS$ 1 - 3MOQ: 1 Square Meter
-
China Manufacturer Wholesale Display Video Screens Shopping Mall Information Kiosk PricesUS$ 530 - 1,500MOQ: 1 Set
-
PVC Inflatable Promotional Polar BearUS$ 3 - 8MOQ: 500 Pieces
