Contact Platform Support
Help Center3G W-CDMA Repeater Signal Booster WCDMA 2100Mhz Mobile Phone Signal Repeater Amplifier
Related Products
-
GSM 980 900MHz 70dBi LCD Mobile Phone Signals Booster RepeaterUS$ 30 - 38MOQ: 1 Piece -
70dBi Mobile Signal Booster GSM 980US$ 30 - 38MOQ: 1 Piece
-
9dBi Indoor 4G Wall Panel Antenna 700-2700Mhz for Cell Phone Signal Booster RepeaterUS$ 8.5 - 12MOQ: 10 Pieces
-
GSM 824-960MHz 8dBi Cell Phone Signal Booster Outdoor Yagi AntennaUS$ 7.1 - 8.8MOQ: 10 Pieces
-
Indoor Celling Antenna 850-2500MHz 2G/3G/4G Mobile Signal Booster/RepeaterUS$ 5.5 - 8MOQ: 5 Pieces
3G W-CDMA Repeater Signal Booster WCDMA 2100Mhz Mobile Phone Signal Repeater Amplifier
Mobile Phone Signal Repeater
A mobile phone signal repeater provides the ultimate solution in any area where cellular communications can not work well due to leak of signal.. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It would also improve indoor electromagnetism environments.
Protect cellular battery life and reduce radiation of cellphones.
A mobile phone repeater is deal for house and office use.
Features:
High gain, easy installation and operation
Full-duplex, single-port design
Use ALC technology. Adjust extent automatically
LED indictor and signal condition indicators
Big linear power, control intermediation and saturation stably
Depend ability stand by Gb6993-86 standard
CE and ROHS approved
High points:
1. Enhance mobile phone signal strength
2. Improve cellphone quality
3. Reduce cellphone radiation
4. Protect the cellular battery life
5. Economic building cost
6. Easy operation
7. Easy installation
8. Build-in power supply
Item |
Specification |
|
Uplink |
Downlink |
|
Frequency |
1920-1980MHz |
2110-2170MHz |
Power |
-70~ 40dbm/FA (1.23MHz) |
|
Gain |
55db |
60db |
Max Output Power |
+17dbm/Total power |
+17dbm/Total power |
Impedance |
50ohm |
|
Seclusion |
>70db |
|
Power Supply |
AC110-220V (Use AC/DC Adapter 5V dc) |
|
Compact Design |
Indoor use |
|
Item Dimension |
100 * 45 * 17 mm |
|
Installation Approaches:
- Fix up outdoor antenna on the housetop and point to the signal tower.
- Connect the outdoor antenna on “ outdoor” port of repeater through cable.
- Connect indoor antennas to “indoor” port in repeater machine through cable.
- Plug power adapter into AC power socket and finish installation.
Installation Approaches:
- If the no signal receipt after activated repeater. Please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve 70dbm
- If cannot call not. Please adjust the direction of outdoor antenna. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure the outdoor and indoor antenna has distance of 20m at least, with a wall between and in a same horizontal line.
Accessories section:
Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.
Send Inquiry to This Supplier
You May Also Like
-
Patch AntennaNegotiableMOQ: 2600 Pieces
-
Reinforced Composite Round Dome FRP Radome Low‑Loss Wave‑Transparent Antenna Cover for Integrated Monitoring StationNegotiableMOQ: 1 Piece
-
Outdoor/Indoor 2400-2483 MHz/2.4GHz 12dB Omnidirectional Fiberglass WIFI AntennaNegotiableMOQ: 100 Pieces
-
Low Pim -150dBc 10dB Power Tapper 800-2700MHz N Type,US$ 3 - 15MOQ: 5 Pieces
-
698-2700MHz 3 in 1 Out RF Hybrid Combiner Coupler n Female 50 OhmNegotiableMOQ: 1 Piece
-
50 Ohm DC-3GHz 10W Dummy LoadUS$ 1 - 25MOQ: 1 Piece
-
Communication Relay Board S42024-L3237-A107US$ 10 - 2,000MOQ: 1 Piece
-
Optical SplitterUS$ 55 - 95MOQ: 100 Sets
-
UFL Base IPEX/UFL Connector for rf Cable Antenna and PCB ModuleUS$ 0.16 - 0.32MOQ: 100 Pieces
-
Fujikura/Sumitomo Original Replacement Blade/Cutting Wheel for FC-6S, FC-7, CT-30 Fiber CleaversUS$ 50 - 130MOQ: 1 Piece
