Contact Platform Support
Help CenterOil Type Injection Mold Temperature Controller
Related Products
-
Fully Automatic Vacuum Plastic LoaderUS$ 1 - 1,000MOQ: 1 Piece -
Robot Manipulator For Injection MachineUS$ 1,000 - 5,000MOQ: 1 Piece
-
Single Arm Servo 3 Axis or 5 Axis Robot Arm PriceUS$ 1,000 - 5,000MOQ: 1 Piece
-
3 Axis Single Arm Cnc Robot Arm With Double Section Arm DesignUS$ 1,000 - 5,000MOQ: 1 Piece
-
Box Type Electronic Temperature Control Plastic DryerUS$ 1 - 1,000MOQ: 1 Piece
Oil type injection mold temperature controller
| Model | TMC-60 |
| Temperature range | 45 C-160C( normal)-199℃(H) |
| Heating medium | Oil |
| Tank Capcity | 12L |
| Pump Pressure | 2.5KG/CM2 |
| Heater | 6KW |
| Cooling type | indirect cooling |
| Moldinlet & outlet | 3/8"*2 |
| Cooling water inlet | 1/2'' |
| L*W*H(MM) | 630*370*620mm |
| Weight (kg) | 50KG |
Choose to Configure
1.Muril -inlet & outlet joints.
2.Refractoy teflon hoses.
3.Thermal oil.
4.PID Temperature controller
Safety System :
1.Electric power's lack -phash & anti-phase Protector and its Signal Light.
2.Punch's Rolling back protector and its signal light.
3.Radiator's overload protector.
4.Buzzing alarm protector when lacking medium and its signal light.
5.Punch's overload protector and its signal light.
6.Inletting ultra-temperature protector and its signal light.
7. Oils overflowing protector and prepare connector.
8.Auto Oil recycling equipment and perpared connector.It is cleam and Economical to change the molds.
9.Special Value type of oil measurement.Its absoulutely safe in operating and maintenance.
10.Anti-explosion design in oil channel . Its absoulutely safe in operating and maintenance.
Features:
A:Improve injection mouding efficent.
1.Before forming ,TMC can automatic control temperature,can reached to the required temperature quickly,and always keep a constant temperature,reduce the time required for preheating the mold.
2.Keeps mold at correct temperatures even when machine is stopped thus eliminating start up delays in the morning or during daytime stops.
B: Improve injection moulding quality.
1.Accurate mold temperatures give even plastic flow patterns .Reduce flow & weld lines,help retain gloss appearance,Eliminate sink marks,silver streaking,delaminating,warping ect.......
2.Steady controlled temperatures make your plastic molding accurate in size & Consistent in quality.
C:Features of the units:
1.Water/oil dual purpose machine can use either water or oil heating medium.
2.Optional PID temperature controllers are used for accurate control of temperature within ± 1 ℃
3.Two step heating select of gives rapid temperature increase control when required thus saning time & power.
Send Inquiry to This Supplier
You May Also Like
-
Temperature Controller & MeterNegotiableMOQ: 2500 Pieces
-
Battery Type Room Temperature CollectorNegotiableMOQ: 100 Units
-
TCC Standard Hot Runner ControllerUS$ 29 - 49MOQ: 1 Piece
-
Therm-O-Disc Snap-Action Capillary Controls 10H SeriesNegotiableMOQ: 200 Pieces
-
Dixell XR02CX-5N0C1 Temperature Controller 220V Single Relay Digital Thermostat for Refrigeration CabinetNegotiableMOQ: 10 Sets
-
DOSTMANN 5000-0100 5000-0140 5000-0215 5000-0315 5000-0300 5000-0300Z 5000-0700 5000-0705NegotiableMOQ: 1 Piece
-
MLC9000-C230NegotiableMOQ: 1 Box
-
TCN4M-24R AUTONICS Economical Dual Display PID Temperature ControllersUS$ 18 - 23MOQ: 1 Piece
-
Oil Type Hot Runner Mold Temperature Controller/Injection Molding Temperature Control SystemNegotiableMOQ: 1 Set
-
Oil Type Mold Temperature ControllerNegotiableMOQ: 1 Piece
