Vertical Multistage Centrifugal Pump
Specifications
vertical multistage centrifugal pump1.CE, GS, ISO9001:2000, CCC
2.More energy-saving,long durablity,
3.100% sure of head,flo
Structure
NO. |
Description | Material |
| 1 | bracket | cast iron |
| 2 | pump base | stainless steel |
| 3 | inlet fluid director | stainless steel |
| 4 | seal gasket | Polytetrafluoroethylene |
| 5 | sleeve | stainless steel |
| 6 | impeller | stainless steel |
| 7 | bearing fluid director | stainless steel |
| 8 | bearing | hard alloy |
| 9 | fluid director | stainless steel |
| 10 | external encloser | stainless steel |
| 11 | round cover | stainless steel |
| 12 | outlet fluid director | stainless steel |
| 13 | mechanical seal | hard alloy fluorin rubber |
| 14 | dishing spring | stainless steel |
| 15 | motor bracket | cast iron |
| 16 | pump shaft | stainless steel |
| 17 | protection sheet | stainless steel |
| 18 | semi-coupling | cast steel |
| 19 | motor | standard vertical motor |
| 20 | adjusting screw | stainless steel |
| 21 | pipe plug | stainless steel |
| 22 | pull-rod | 45# steel |
| 23 | pressure adjustor | stainless steel |
Remarks
All performance curves are based on the measured values when a motor works under power of 380V, at a constant speed of 2900r/min.
The capability of flow and head conforms to ISO9906.
Measurement is done in 20 air-free water of which viscosity is 1mm2 /s.
The operation of pump shall refer to the performance range marked in thickened curve so as to avoid damages caused by over-load.
Minimum inlet pressure:
Figure NPSH curve+mininum safety margin 0.5m delivery head.
The performance of vertical multistage centrifugal pump:
| Model | Diving Motor(kw) | Q(m3/h) | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
| QDL8-20/1 | 0.75KW | H(m) | 10 | 9.5 | 9.3 | 9 | 8.5 | 8 | 7 | 6 |
| QDL8-20 | 0.75KW | 20 | 19.5 | 19 | 18 | 17 | 16 | 14 | 13 | |
| QDL8-30 | 1.1KW | 30 | 29.5 | 28.5 | 27 | 25 | 24 | 21 | 19 | |
| QDL8-40 | 1.5KW | 41 | 39.5 | 38 | 36 | 34 | 32 | 28 | 26 | |
| QDL8-50 | 2.2KW | 52 | 50 | 48 | 45 | 42 | 40 | 36 | 32 | |
| QDL8-60 | 2.2KW | 62 | 60 | 57 | 54 | 51 | 48 | 43 | 39 | |
| QDL8-80 | 3KW | 83 | 80 | 77 | 73 | 69 | 65 | 58 | 52 | |
| QDL8-100 | 4KW | 104 | 100 | 97 | 92 | 87 | 81 | 73 | 65 | |
| QDL8-120 | 4KW | 124 | 120 | 116 | 111 | 104 | 92 | 87 | 78 | |
| QDL8-140 | 5.5KW | 145 | 141 | 136 | 130 | 122 | 113 | 102 | 92 | |
| QDL8-160 | 5.5KW | 166 | 161 | 156 | 148 | 139 | 130 | 118 | 106 | |
| QDL8-180 | 7.5KW | 187 | 182 | 175 | 167 | 157 | 146 | 134 | 120 | |
| QDL8-200 | 7.5KW | 208 | 202 | 195 | 186 | 175 | 163 | 150 | 135 |
Send Inquiry to This Supplier
You May Also Like
-
M, AH, HH Series Slurry PumpNegotiableMOQ: 1 Piece
-
Spot Danfoss Piston Pump JR-L-S75C-LS-21-25-NN-N3-S1NE-A2NNNN-JJ J-NNNNegotiableMOQ: 1 Piece
-
Explosion‑Proof Fluoropolymer‑Lined Circulation Pump for Hazardous Volatile Chemical WorkshopNegotiableMOQ: 1 Piece
-
Water PumpNegotiableMOQ: 2300 Pieces
-
Mo-Qdmech Cement Grout Pump Grouting Machine Mo803 Adjustable Pressure Mortar Slurry Pump for Road Bridge ProjectUS$ 1050 - 1080MOQ: 1 Set
-
Self-Priming Chemical Axial Flow Magnetic Oil Pump for Industrial UseNegotiableMOQ: 10 Bags
-
Innovative CMO GHIBLI FOOT PUMP Industrial Solutions for Enhanced PerformanceNegotiableMOQ: 1 Set
-
Manufacturer Direct Selling Fluorine Lined Strong Acid and Alkali Resistant Pump IHF Series Fluorine Plastic Alloy Chemical Centrifugal PumpUS$ 150 - 1600MOQ: 10 Pieces
-
Non Sparking Hand Oil Pump Cu-Al Transfer Portable, SCREW TypeUS$ 144 - 274MOQ: 1 Piece
-
Parts Of Breast PumpUS$ 1,000 - 1,100MOQ: 2 Tons