Contact Platform Support
Help CenterParticle Board Hot Press /pb Production Line in Full Automatic
Related Products
-
OSB Hot PressUS$ 1,500,000 - 1,500,000MOQ: 1 Set -
OSB Machine Manufacturer/supplier/1220x2440m8to30mmNegotiableMOQ: 1 Set
-
Automatic OSB Machine Production Line Cutting MachineNegotiableMOQ: 1 Set
-
1220x2440x8to30mm Particle Board Hot Press MachineUS$ 350,000 - 2,650,000MOQ: 1 Set
-
Particle Board Making Machine/ Particle Board Production LineUS$ 200,000 - 2,000,000MOQ: 1 Set
Specifications
1.we are manufacturer2.we have good quality , our product spread all over the world
3.the capacity can get 10000 cbm one year
Particleboard(particle board hot press/chipboard production line is made from small-diameter wood, branches, wood residues and non-wood agricultural residues via Chip preparation, drying, spreading and hot press section. Finished boards can be used for furniture, building, packing, vehicle and sheep decoration and lamination.
1. Chip preparation section
Raw material is reduced into qualified chips by the drum chipper, then the chips are transported to the chip bin, and then feed to the knife-ring flaker by which the chips are turned to flakes, then the flake stored in wet flake bin.
2. Drying and sifting section
The flakes discharged from the wet flake bin are conveyed to the rotary dryer. Qualified core flakes are stored in core flake bin; oversize flakes are send to mill to be re-crushing, and transported to surface flake bin.
3. Glue regulating and applying section
After scaled, the core and surface flakes are to be effectively and uniformly mixed with qualified glue independently in their glue mixers respectively.
4. Forming and hot-pressing section
The surface and core flakes are sent into classi-forming machine, and forming on the mat conveyor uniformly. After processes of metal remover, pre-press, lengthwise saw, cross saw, accelerate conveyor, scaling conveyor, storing conveyor and loading conveyor, mats are transported to carrier and then to hot press. Rough boards after pressing are pushed to unloader via pallet.
5.Cooling and sizing section
The rough board is conveyed to star-cooler for cooling, then the rough board goes through side trimming saw and become a qualified particle-board, stacked on the hydraulic lift.
6. Sanding Section
The board are sanded, checked and stored .
PLC control is used in mat-forming section.
Send Inquiry to This Supplier
You May Also Like
-
OSB Production Line/ Particle Board Making Machine/ Particle Board Making MachineUS$ 200,000 - 2,000,000MOQ: 1 Set
-
OSB Production Line/ Particle Board Making Machine/ Particle Board Making Machine/ Osb Making MachineUS$ 200,000 - 2,000,000MOQ: 1 Set
-
Particle Board Making Machine/ Particle Board Production Line/ Particle Board Melamine Lamination Hot PressUS$ 200,000 - 2,000,000MOQ: 1 Set
-
Particle Board Making Machine/ Particle Board Production Line/ Particle Board Melamine Lamination Hot PressUS$ 200,000 - 2,000,000MOQ: 1 Set
-
Particle Board Forming Machine/chip Board PlantUS$ 100,000 - 150,000MOQ: 1 Set
-
Full Automatic Chip Board Production Line /1220*2440mm Particle Board Production LineUS$ 350,000 - 2,600,000MOQ: 1 Set
-
PB Line/Chip Board Hot Press /NegotiableMOQ: 1 Set
-
69ft Bagasse Particle Board Production Line/hot Press MachineNegotiableMOQ: 1 Set
-
Bagasse Particle Board Manufacturers 1220x2440mm in ChinaNegotiableMOQ: 1 Set
-
1220x2440mm Particle Board Manufacturer in Linyi ChinaUS$ 1,000,000 - 1,000,000MOQ: 1 Set
