Contact Platform Support
Help CenterPost -tention Multi-strand Anchor
Related Products
-
Anchorage Wedges for pc Strand Prestressed Anchor Head and Wedge Anchorage(anchor) and WedgeUS$ 0.1 - 6MOQ: 100 Sets -
Single Barrel and WedgeUS$ 0.1 - 6MOQ: 100 Sets
-
Prestressed MonoanchorUS$ 0.1 - 6MOQ: 100 Sets
-
Barrel and Wedge Dome TypeUS$ 0.1 - 6MOQ: 100 Sets
-
Metal Material Galvanization Corrugated DuctUS$ 0.1 - 6MOQ: 100 Sets
Prestressing force anchorage
YJM Tensioning System is a complated, independent building measure researched, and developed by TianJin ZhenHua Prestressing Force Technology Co. Ltd. It has been widely adopted by modern construction,especially used in pre-tension or post-tension for concrete constructions and building materials.
YM Series products are composed of tensioning anchor,holding anchor,connectors.It can used to lock the steel strand wires on/under classes of 2000Mpa standard strength,which is usually in diameters of 12.7mm /12.9mm/15.2mm/15.7mm.
It has been verified by pratice that various type of YM anchor also can be used for the different kinds of strand wires produced according to ASTM/BS/JIS/JIG/AS and other international standards respectively only if its technical parameters shall mary the related detail materials.
YJM Anchor consists of anchor head, bearing plate, anchor wedge, spiral reinforcement , plastic or metal corrugated ducts, PC strands(PC wire bundle).The products can be divided into two types according to their strand diameters: YJM13 andYJM15.
YJM anchorage system has the following features:
YJM anchorage( anchor block ) system can be used to anchor Φ12.7mm-15.7mm and strength below 2000Mpa PC strands.
YJM anchorageis complete in varieties and specifications.Wedge anchorage can be chosen arbitrarily from 1-55 wire PC strand (PC wire bundle) or according to the specific demands of the engineering designs. It is an anchorage system featured by its wide range of the application, easy of the design and simplicity of the process.
Send Inquiry to This Supplier
You May Also Like
-
Cast Iron Trench Drain Cover, 1/2" Thick, Load Class E600, 24"x12" Solid Grate for Industrial UseNegotiableMOQ: 300 Square Meters
-
HPL Panel (clean Room)NegotiableMOQ: 100 Square Meters
-
POLYURETHANE SANDWICH PANEL ROCK WOOL SANDWICH BOARD FactoryNegotiableMOQ: 100 Pieces
-
Press Locked Steel Grating, 40x40mm Aperture, 5mm Flat Bar, Load Capacity 4kN/m², Standard CompliantNegotiableMOQ: 50 Cubic Centimeters
-
for Industrial Warehouse Cladding: Galvanized Metal Wall Panel, Wind Load up to 150km/hNegotiableMOQ: 1 Square Meter
-
Ex-factory Price Q195 Q235 AiSi ASTM Hot Rolled 1.5mm 1.6mm Low Carbon Steel Coil Modern Durable Boiler Plate Welding CuttingNegotiableMOQ: 1 Ton
-
Hot Dipped Galvanized Diamond Metal Lath Expanded 2-1/2-gauge Steel Sheet Anti-Corrosion Durable Low Cost Roofing Wall FloorUS$ 1.7 - 3.2MOQ: 1 Piece
-
High Purity Zirconia Ceramic Ring 8mm OD With 1500 MPa Flexural Strength for Valve SealsNegotiableMOQ: 1 Piece
-
Sandwich PanelNegotiableMOQ: 2500 Pieces
-
pu Wall Sandwich Panel Rigid Insulation Polyurethane Foam BoardNegotiableMOQ: 1
