Contact Platform Support
Help CenterHigh Precision BIOBASE PH Meter PH900P
Related Products
- pH Mode:
Up to 5 points push-button calibration with auto-buffer recognition.
selectable pH buffer standards, resolution and temperature units.
Automatically calculates and displays electrode slope that helps youdecide whether to replace pH electrode.
- ORP Mode:
Single point offset calibration allows user adjusts displayed value toa known standard.
Absolute or Relative mV measurements provides accurate readings.
- Ion Mode:
Standard BNC connector can connects many Ion selective Electrode.
2 to 5 points push-button calibration from low to high concentrations.
selectable multiple concentration units, including ppm, mg/L, mol/L.
Direct readout ion concentration simplifies measurement process.
mV measurement allows user to check performance of ion electrode.
- Conductivity/TDS/Salinity Mode:
Up to 5-point push-button calibration allows user to uses customizedcalibration solutions.
Adjustable TDS factors, cell constants, temperature coefficients andnormalization temperature.
selectable linear or pure water compensation modes.
In salinity measurement modes, selectable practical salinity (PSU) orseawater measurement standard (ppt).
- Dissolved Oxygen Mode:
1 or 2 points auto-calibration (100% in saturated air or air-saturatedwater, 0% in zero oxygen solution).
Manual salinity and barometric pressure compensation.
selectable readout in ppm, mg/L or percentage saturation.
General Features:
- Automatic Temperature Compensation (ATC) ensures highlyaccurate measurements over the entire range.
- Calibration due reminder helps you to calibrate meter regularly.
- Automatic endpoint function freezes stable measured values.
- Help message as a operational guide to helps you understandhow to use meter.
- Setup menu lets user customize the calibration points, stabilityconditions, date and time to meet measurement requirements.
- Expanded memory stores and recalls up to 500 readings.
- Built-in real-time clock stamps stored data to meets GLP.
- Stored data can be transferred into PC via USB communication interface.
| Model | PH900P |
| pH Range | -2.000~20.000pH |
| pH Accuracy | ±0.002pH |
| Resolution | 0.001, 0.01, 0.1pH, selectable |
| Calibration Points | Up to 5 points |
| Calibration Solutions | USA(pH1.68/4.01/7.00/10.01/12.45), NIST(pH1.68/4.01/6.86/9.18/12.45), DIN(pH1.09/4.65/6.79/9.23/12.75) |
| Ion Concentration Range | 0.001~19999ppm, mg/L, mol/L (Depending on measuring range of Ion selective Electrode) |
| Ion Concentration Accuracy | ±0.5% Full Scale (Monovalent), ±1% Full Scale (Divalent) |
| Calibration Points | 2 to 5 points |
| Calibration Solutions | 0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000ppm, mol/L, mg/L |
| mV Range | -1999.9~1999.9mV |
| mV Accuracy | ±0.2mV |
| Resolution | 0.1, 1mV, selectable |
| Conductivity Range | 0~20mS/cm (Max.200mS/cm) |
| Conductivity Accuracy | ±0.5% Full Scale |
| Calibration Points | Up to 5 points |
| Calibration Solutions | 10uS/cm, 84uS/cm, 1413uS/cm, 12.88mS/cm, 111.8mS/cm |
| TDS Range | 0~10ppt (Max. 20ppt, Depending on factor setting) |
| TDS Accuracy | ±1% Full Scale |
| TDS Factor | 0.1~1.0 (Default 0.5) |
| Salinity Range | 0~10ppt (Max.80ppt) |
| Salinity Accuracy | ±1% Full Scale |
| Salinity Measurement Modes | Practical Salinity (PSU) or Seawater Measurement Standard (ppt) |
| Resistivity Range | 0~100MΩ |
| Resistivity Accuracy | ±1% Full Scale |
| Resolution | 0.001, 0.01, 0.1, 1, Automatic |
| Temperature Coefficient | 0.0~10.0% per °C |
| Compensation Modes | Linear or Pure Water |
| Cell Constant | K=0.1, 1, 10, selectable |
| Normalization Temperature | 20°C or 25°C |
| Dissolved Oxygen Range | 0.00~20.00mg/L or ppm |
| Resolution | 0.01, 0.1mg/L, selectable |
| Dissolved Oxygen Accuracy | ±0.2mg/L (Calibration and measurement under the conditions of same temperature) |
| % Saturation of Oxygen | 0.0~200.0% |
| Accuracy | ±2.0% |
| Salinity Correction | 0~50g/L |
| Pressure Correction | 60.0~112.5kPa, 450~850mmHg |
| Temperature Range | 0~105°C, 32~221°F |
| Temperature Accuracy | ±0.5°C, ±0.9°F |
| Temperature Calibration | Manual |
| Temperature Compensation | 0~100°C, 32~212°F, Automatic or Manual; DO Mode: 0~50°C, 32~122°F, Automatic |
| Auto-Off | Manual or Automatic (10, 20, 30 minutes after last key pressed, selectable) |
| Hold Function | Manual or Automatic |
| Stability Conditions | Low or High, selectable |
| Calibration due reminder | 0 to 30 days |
| Reset Function | Yes |
| Memory | 500 data sets with Date/Time stamping |
| Output | USB Communication Interface |
| Connector | BNC and 6-pin connector |
| Power Requirements | DC5V, using AC adapters, 220VAC/50Hz |
| LCD Display | Custom dual-display LCD (130×110mm) |
| Dimensions | 210(L)×188(W)×60(H)mm |
| Weight | 1.2kg |
Mainly packed by Carton box or other common security package, you also can give us your special requirments about it. We will try our best to make sure the goods arrive safely.
At present, we are dealing on laboratory equipment and medical analytical instruments, such as
biological safety cabinet, laminar flow clean bench, fume hood, refrigerator and freezer, incubator, oven, autoclave, freeze dryer, spectrophotometer, centrifuge, Elisa reader and washer, Semi&Auto biochemistry analyzer, biochemistry reagents etc.
BIOBASE is a professional manufacturer of laboratory products from 1999. Our main products are Biosafety Cabinet (Class I/II/III), Laminar Flow Cabinet, Fume Hood, Biochemistry Analyzer, Reagent, Autoclave anf Incubator.
We have more than 800 employees and 2000 square meters production base, our output per year is amount to 10000 units. Pursuing the highst quality is the tenet if BIOBASE. We hope everybody will enjoy BIOBASE service to keep away from the infectious disease.
Our advantages:
-We built an excellent research team which consists of 50 professional engineers
-We have 14 years production experience and a strong technical production team, we adopt high-tech and state-of-the-art production equipments from Italy, Japan and Switzerland, tec.
-We have a strong quality control team to inspect all production stage, from the purchased accesory to the finished products.
-We have full sets of advanced quality assurance equipments
We have ISO9001 quality management system; ISO14001 environmental managemnet system, ISO13485, CE mark, MET and NAF49 certificate.
We got EN12469 certificate for Biosafety Cabinet in 2013.
If you are interested in our product and company, or if you want to get more information, just contact me as the detail below:
Send Inquiry to This Supplier
You May Also Like
-
Industrial pH Meter for Wastewater Treatment With IP65 Waterproof DesignNegotiableMOQ: 1 Set
-
PHS-8B Online Auto PH AnalyzerUS$ 258 - 550MOQ: 1 Set
-
New PH-009 IA Pen Type Digital pH Meter Digital Tester Hydro Soil PH Meter Blood PH MeterUS$ 1 - 100MOQ: 100 Pieces
-
Digital PH MeterNegotiableMOQ: 100 Pieces
-
Digital Soil ph MetersUS$ 30 - 80MOQ: 5 Pieces
-
SELON510 LAB DIGITAL PH METERSUS$ 565 - 619MOQ: 1 Piece
-
PHS-3D Bench Top Ph MeterNegotiableMOQ: 50 Pieces
-
3 In1 Plant Flowers Soil PH Tester Moisture Light Meter Hydroponics Analyzer NewNegotiableMOQ: 500 Pieces
-
Automatic Electronic PH&ORP Swiming Pool Water Chemical Level ControllerUS$ 450.00 - 500.00MOQ: 1 Set
-
Industrial Acid Concentration TesterUS$ 250 - 300MOQ: 1 Unit
