Contact Platform Support
Help CenterSteel Sturcture With Best Quality
Related Products
Specifications
Steel Carports1, Easy to install
2, attractive apprance
3, low cost
Steel Carports
Some information about the products .
1. Vertical Support #1: For each 6-Car Carport, there are three vertical support posts (standing between car #1/car #2, car #3/car #4, and car #5/car #6)
Main Vertical Beam is rectangular HSS steel tubing, 18 feet 4 inches long, 8 inches x 4 inches, .250 inch thick steel
2 Diagonal Support Beams are square HSS steel tubing, 4 inches by 4 inches, .125 inches thick, mounted to the vertical support
2. Roof Support #2: For each 6-Car Carport, we need 6 Roof Support Beams.
Rectangular HSS steel tubing 10 feet long, 6 inches by 4 inches, .125 inches thick
.25 inch thick Steel Foot plates (Cleats) welded to each end, with L-Shaped Cleat support welded to middle to bolt to C-Purlin
6 holes need to be drilled in each Cleat
3. C-Shaped Purlin #3: (Can be lipped or plain – see attached file Perlin.jpg) For each 6-car Carport, we need 12 pieces of Purlin
CEE Steel 27 feet long, 8 inches by 2.5 inches, 12 GA (.125 inches thick)
No Holes need to be drilled into these pieces.
4. Roof Panels: these panels come standard in 3 feet 2 inches wide by 10 feet long in corrugated steel 26 Gauge 1 and ¼ inch R-Panel.
These sections have a 2 inch overlap, so to cover 54 feet we need on both sides, we need 36 pieces.
If you can make these pieces 6 feet wide and do less pieces, that is fine. Whatever is best.
5. Ridge Cap: Steel 6 inches wide V-shaped 27 feet long, 2 pieces to span 54 feet.
Send Inquiry to This Supplier
You May Also Like
-
Cast Iron Trench Drain Cover, 1/2" Thick, Load Class E600, 24"x12" Solid Grate for Industrial UseNegotiableMOQ: 300 Square Meters -
HPL Panel (clean Room)NegotiableMOQ: 100 Square Meters
-
POLYURETHANE SANDWICH PANEL ROCK WOOL SANDWICH BOARD FactoryNegotiableMOQ: 100 Pieces
-
Press Locked Steel Grating, 40x40mm Aperture, 5mm Flat Bar, Load Capacity 4kN/m², Standard CompliantNegotiableMOQ: 50 Cubic Centimeters
-
for Industrial Warehouse Cladding: Galvanized Metal Wall Panel, Wind Load up to 150km/hNegotiableMOQ: 1 Square Meter
-
Ex-factory Price Q195 Q235 AiSi ASTM Hot Rolled 1.5mm 1.6mm Low Carbon Steel Coil Modern Durable Boiler Plate Welding CuttingNegotiableMOQ: 1 Ton
-
Hot Dipped Galvanized Diamond Metal Lath Expanded 2-1/2-gauge Steel Sheet Anti-Corrosion Durable Low Cost Roofing Wall FloorUS$ 1.7 - 3.2MOQ: 1 Piece
-
High Purity Zirconia Ceramic Ring 8mm OD With 1500 MPa Flexural Strength for Valve SealsNegotiableMOQ: 1 Piece
-
Sandwich PanelNegotiableMOQ: 2500 Pieces
-
pu Wall Sandwich Panel Rigid Insulation Polyurethane Foam BoardNegotiableMOQ: 1
