Contact Platform Support
Help CenterHSC Pump
Related Products
HSC pump
HSC pump
1,What is Credo CPS series HSC pumps ?
Type CPS pumps are new type pf single-stage double-suction centrifugal spilit pumps with high performance. They are widely used in deliverying liquids to the water plant, circulation water system of air-conditioner, pipe net system of supplying heated water, construction, watering, drainge pumping station, power- station, industrial water supply system, ship.
2,What is the Construction of Credo CPS Series HSC pumps ?
Type CPS pumms are horizontally installed, the casing and the cover of pumps are devided along the axis. The pump cover is above the shaft and the casing is under the shaft. The inlet and the outlet are under the shaft. The centreline of inlet and outlet is perpendicular to the axis. The rotor elements will be removed without disturbing the inlet piping and the outlet piping, only dismantling the pump cover while maintenance. The shaft seaft seal uses packing seal or mechanical seal.
3,How does Credo CPS Series HSC pumps works?
The rotation for type CPS pump is clockwise looking from the motor to the pump, i.e.the pump inlet is on the right and the outlet is on the left. The driver(motor) also may be connected with the end of pump shaft sccording to customer's requirements, meantime, the rotation, the direction of inlet and outlet are oppsite to the above-mentioned.
4,The material of main parts of Credo CPS Series HSC pumps
The medium-contacting parts are of cast iron.
The material of impeller also may be cast steel or brass according to customers requirements.
5,Complete provision range of Credo CPS Series HSC pumps
Pump, motor, coupling. Common bedplate will be supplied when inlet diameter of pump is less than 200mm.
|
6,Performance Range of the Credo CPS Series HSC pumps Outlet diameter of pump DN 80—800mm
Capacity Q:22—11600
Head H:7—200
Temperature T: -20°C~105°C
Solid grains ≤80mg/l
Permitted working pressure ≤2.5Mpa |
| 7,Description of Credo CPS Series HSC pumps |
|
CPS300-700(I)A
CP—Made In CREDO PUMP
S—High Efficency Single-Stage Double-Suction Centrifugal Pump
300—Outlet Diameter is 300mm
700—The Nominal Diameter of impeller
(I)—Remodel Design of impeller
A—A,B,C separately represents that outer diameter |
Polywood Case , as per buyers requirements// 45-60 days after payment
Send Inquiry to This Supplier
You May Also Like
-
Durable Grouting Steel Hood for Anti-pollution & Safety Protection During GroutingNegotiableMOQ: 1 Piece
-
Skid Steer Rotary Broom With Hydraulic Motor Drive and Flexible Dust SkirtsUS$ 1300 - 1600MOQ: 1 Piece
-
Pressure Sensor 803594130 for XCMG Excavator Hydraulic System Genuine OEMUS$ 1MOQ: 1 Unit
-
Engineering & Construction Machinery PartsNegotiableMOQ: 2500 Sets
-
Excavator Foot Valve E312 E320 E320B PartsNegotiableMOQ: 1 Blade
-
Chromium Carbide Overlay Wear Plate Excavator Crusher Bucket LinerUS$ 399.69 - 399.69MOQ: 1 Square Meter
-
Original Sany LD700RC Rock Chisel Bucket Tooth for Sany Excavator Spare Parts.US$ 6MOQ: 1 Unit
-
48-17 Excavator Spare Part for Pump Drive System YNF18405NegotiableMOQ: 1 Piece
-
Excavator Piston Pump PC05-6 PC20 PC30 PC200-6 PC200-7 PC220 PC240 PC400 PC450 High Pressure Hydraulic Pump for KomatsuNegotiableMOQ: 1 Combo
-
Connector Sealing up Pipe Stop Water Hexagon Threaded Protection Hard PlugsNegotiableMOQ: 100 Pieces
