Contact Platform Support
Help Center[Hydranautics] Reverse Osmosis Membrane
![[Hydranautics] Reverse Osmosis Membrane thumbnail-1](https://img13.fr-trading.com/2/1_122_69268_100_100.jpg.webp)
![[Hydranautics] Reverse Osmosis Membrane photo-1](https://img13.fr-trading.com/3/1_122_69268_100_100.jpg.webp)
Related Products
-
2T Full Automatic Reverse Osmosis PlantNegotiableMOQ: 1 Metric Ton -
5T Reverse Osmosis Water PurifierNegotiableMOQ: 1 Metric Ton
-
7T Reverse Osmosis Water Treatment FacilityNegotiableMOQ: 1 Metric Ton
-
10T Reverse Osmosis Pure Water EquipmentNegotiableMOQ: 1 Metric Ton
-
Reverse Osmosis Water Treatment FacilityNegotiableMOQ: 1 Metric Ton
CPA2-4040 reverse osmosis membrane is used for the desalination of low salinity water and other similar water and it has high desalination rate and long time stable performance under high flow and low operating pressure (fall 20-40% compared with common low pressure membrane).
CPA2-4040 ro membrane is applicable to the water which contains less than 2000ppm salt. It is used to produce pure water or ultra pure water in electronics, power, petrochemical, food, beverage and pharmacy.
|
|
Model |
CPA2-4040 |
|
Capability |
Materials |
PA(polyamide) |
|
Average Salt Rejection% |
99.5(99.0) |
|
|
Permeate Flow gpd(m3/d) |
2200(8.3) |
|
|
Error |
±15% |
|
|
Active Membrane Area ft2(m2) |
375(35.0) |
|
|
Testing Conditions
|
Standard Solution |
1500 ppm NaCl |
|
Operating Pressure psi(Mpa) |
225/15.5 |
|
|
Recovery Rate of Single Membrane Element |
15% |
|
|
Temperature deg C |
15℃--35℃ |
|
|
PH Value of Solution |
4-9 |
|
|
Test Time |
Run for 30 minutes |
|
|
Limiting Conditions
|
Max. Feedwater Temperature deg C |
45 |
|
Max. Operating Pressure psi(MPa) |
600(4.12) |
|
|
Max. Feedwater Flow gpm(m3/h) |
75(17.0) |
|
|
Max. SDI of Feedwater |
5 |
|
|
Max. NTU of Feedwater |
1 |
|
|
Concentration of Free Chlorineppm |
< 0.1 |
|
|
PH Value Range of Feedwater as Continuous Operation |
2-11 |
|
|
PH Value Range of Feedwater as Chemical Cleaning |
1-11 |
|
|
Max. Pressure Difference of Single Membrane Element psi(MPa) |
13(0.09) |
|
|
The minimal proportion of single membrane element's conc. press to perm. flow |
5 : 1 |
Send Inquiry to This Supplier
You May Also Like
-
Water Bath SterilizerNegotiableMOQ: 1 Set
-
ISO 9001 Compliant FRP Septic Tank With 5000L Volume and 300kg Load CapacityNegotiableMOQ: 300 Cubic Meters
-
Modular GRP FRP Water Storage Tank for Water Treatment and PurificationNegotiableMOQ: 1 Piece
-
High-Efficiency MSW & Aged Landfill Waste Sorting Line 99% Separation Rate, Municipal Solid Waste Recycling System CE CertifiedUS$ 39055 - 200055MOQ: 1 Combo
-
220V Electric Composting Equipment for Organic Waste ProcessingNegotiableMOQ: 1 Piece
-
COD Wastewater Treatment Equipment With PLC Touch Screen 10m3/h 220VUS$ 6950 - 954000MOQ: 2 Combos
-
Ceramic Ink Printing On Glass Inorganic Glass Paint Enamel Pigments High Coverage For Range Hood GlassNegotiableMOQ: 0
-
PPS Needle Felt Filter Cloth for Thermal Power Plants for Boiler Gas PurifyNegotiableMOQ: 1 Piece
-
Waste Treatment EquipmentNegotiableMOQ: 2500 Sets
-
Equipo de Cremación Humana de Alto Volumen Horno de Cremación Estilo Americano Equipo de Crematorio Horno Para CremaciónNegotiableMOQ: 1 Set
