Contact Platform Support
Help CenterExpanded PTFE Joint Sealant
Related Products
-
Expanded Ptfe Sealing Joint 3mm x 1.5mm x 50mUS$ 10 - 30MOQ: 200 Kilograms -
PTFE Joint Sealant TapeUS$ 10 - 30MOQ: 200 Kilograms
-
Ptfe SoakedNegotiableMOQ: 50 Kilograms
-
Various Fillers of PTFE Products /PTFE Filled Goods China ManufacturerUS$ 8 - 16MOQ: 100 Kilograms
-
With Oil Ptfe RopeUS$ 9 - 18MOQ: 50 Kilograms
Expanded PTFE Joint Sealan
1. Description
Made of pure Expanded PTFE, widely used in the transport and sealing of industrial fluids. It is the most cost-effective alternative to sheet gasketing for large equipment flanges. Because it is a form-in-place gasket, so it nearly can be used in any sealing surface. Especially for the irregularities and damaged flange surface, Expanded PTFE joint is the best choice.
2. Advantage:
Easy to install
Low stress-to-seal
Can conform to any surface, including rough, pitted, scratched and damaged surfaces.
Resistant to creep and cold flow
100% expanded PTFE, has the same chemical inertness of pure virgin PTFE.
Unlimited Shelf Life
Over compression is no problem
3. Technical Data:
Temperature: -100°C ~ 280°C
Pressure: 20Mpa(fluid); 14Mpa(gases)
PH range: 0 ~ 14
Tensile Strength: ≤ 8 Mpa
Compressibility: 55% ~ 80%
Creep relaxation: ≤ 40%
4. Offer Size:
Width:3 ~ 100mm
Thickness: 1 ~ 10mm
Length: 3 ~ 30m
5. Applications:
PTFE Joint Sealant is especially suite d for sealing flange connections, pipe systems, hydraulic and pneumatic systems, etc. In addition, it’s also ideal for seals in glass, enamel and plastic flanges, vessels and special shaped sealing surface.
PTFE Joint Sealant saves money and time. Since there is no scrap or waste, it costs less than other gasket materials. By using only a few sizes, large inventories of sheet gasketing and costly precut gaskets can be eliminated. Installation time is kept to a minimum since there are no templates, precutting or special fitting requirements.
6 Photos:
Send Inquiry to This Supplier
You May Also Like
-
Virgin PP Granules CX02-82 SABIC With Flexural Modulus 1500 MPa for Rigid PartsUS$ 1 - 1.02MOQ: 1 Kilogram
-
Polypropylene PP Resin K8009 - High Rigidity Homopolymer for Automotive PartsNegotiableMOQ: 1 Kilogram
-
POM K300 Plastic Granules 1.5% Shrinkage Rate 80 Shore D Hardness Stable Injection Molding PerformanceNegotiableMOQ: 1 Kilogram
-
Asahi Kasei Leona FR370 PA66 Flame Retardant Resin Standard Compliant With Global Supply Chain AvailabilityNegotiableMOQ: 1000 Kilograms
-
Glow-in-the-Dark PVC Plastisol Sofubi Toy With UL94 V-0 Flame RatingNegotiableMOQ: 500 Kilograms
-
Polymers & ResinsNegotiableMOQ: 2000 Bags
-
Economic Interlocking Horse and Cow Stable Mat Made of Rubber or EVAUS$ 13.5 - 35.4MOQ: 100 Pieces
-
SAP Super Absorbent Polymer for Sanitary Napkins or DiapersUS$ 1.5 - 2MOQ: 1000 Kilograms
-
Slip Additive Masterbatch With PE CarrierUS$ 2.3 - 2.5MOQ: 500 Kilograms
-
UHMW PE Powder for Lead-acid Battery SeparatorUS$ 2,750 - 2,850MOQ: 1 Ton
