Contact Platform Support
Help CenterPull-push Prop Type Automatic Climbing Formwork for Dam, High Building
Related Products
-
High Safety Hydraulic Climbing Formwork System With High Loading CapacityNegotiableMOQ: 1 Unit -
DXB-180 / DXB-240 Suspending Scaffold Self Climbing Formwork System for Single-sided WallsNegotiableMOQ: 1 Piece
-
Steel Galvanized Cantilever Dams, Piers Climbing Formwork for Retaining Wall / Cooling TowerNegotiableMOQ: 1 Square Meter
-
PJ240 Light Weight Flexible Climbing Formworks for Concrete Pouring of PiersNegotiableMOQ: 1 Piece
-
Auto Climbing Hydraulic Formwork Bracket System With Hydraulic Pump / Oil CylinderNegotiableMOQ: 1 Piece
Certification:CE,ISO,FCC
pull-push prop type Automatic Climbing Formwork for dam, high building
1. CB-240 Auto-climbing Formwork2. suitable for dam, high building ( 100 meters high)
3. can stick to the concrete tightly.
Introduction:
The climbing formwork CB-240 is mainly used in pouring concrete of piers, high buildings, and so on. Because the concrete lateral pressure is entirely supported by anchor system and the wall-through tie-rods, additional reinforcement is not needed. The construction is easy, rapid and economical. One single pouring height can be adjusted in a wide range, and the surface of concrete is smooth and durable.
There are two types of climbing units for CB-240, that is, pull-push prop type and truss type. CB-240 of the truss type is suitable for the construction work with heavy bearing load, high altitude formwork installation and relatively small range of adjustable inclination.
The Characteristics
1 The load of bracket, formwork and other load during construction are all supported by the anchor system. There is no need to set up scaffolding. It’s suitable for high altitude construction work.
2 One single pouring height can be up to 6 meters, and the formwork unit can move backward 600mm.
3 The formwork can be adjusted horizontally or vertically as requested. The pull-push prop type formwork system can be so adjusted as to lean forward or backward.
4 Couplings are used for the connection of the formwork units, and therefore they will stand in a straight line. All connecting parts are on a high level of standardization and universality.
5 The formwork can stick to the concrete tightly by anchoring set to avoid dislocation and leakage.
| 1 | formwork panel | H=4000mm | m2 |
| 2 | suspending scaffold | set | |
| 3 | Diagonal bracing | set | |
| 4 | threaded rod | D15 | m2 |
| 5 | Flynt | D15 | Pc |
| 6 | Shim block | D20 | Pc |
| 7 | Shaft Platform Beam | 2.1-2.7m | set |
| 8 | Anchor cone (Climing cone) | M30/D20 | Pc |
| 9 | bolt | M30X80 | Pc |
| 10 | Mold Releasing agent | Litre | |
| 11 | plate,steel pipe,Guardrail | ||
| 12 | Screw and nut | M16X120 | set |
| 13 | Expension bolt | M12X60 | set |
Send Inquiry to This Supplier
You May Also Like
-
Custom Dolphin Sculpture for Water Park and Resort ProjectsNegotiableMOQ: 1 Piece
-
Fountain NozzleNegotiableMOQ: 1 Piece
-
Granite Fountain BallNegotiableMOQ: 20 Pieces
-
FountainNegotiableMOQ: 1
-
Garden Water FountainNegotiableMOQ: 1 Ton
-
Chinese Stone Carvings and Sculptures--buddhaNegotiableMOQ: 1 Piece
-
JOY 3D CNC Stone Cutter ManufacturerNegotiableMOQ: 1 Set
-
Supply Stone‑carved Elephants, White Marble Elephants. Customization of Various Sizes is Available.US$ 720 - 800MOQ: 1 Pair
-
Musical FountainsUS$ 1000 - 10,0000MOQ: 1 Set
-
Ou Yi Stone Sculpture Fountain Manufacturer Sunset Red Wind Water Ball Villa Landscape Decoration Marble Fountain Processing CustomizationUS$ 2700 - 3000MOQ: 1 Piece
