Contact Platform Support
Help CenterSteel Cut To Length Line For Steel Coil , 2mm Thick ,500mm Width
Related Products
-
Simple Automatic Steel Cut To Length Line For Carbon Cold SteelNegotiableMOQ: 1 Square Meter -
Metal Steel Cut To Length Line For Coil Sheet , 6mm Thick ,600mm WidthNegotiableMOQ: 1 Piece
-
Full Automatic Steel Cut To Length Line For Silicon Steel 2mm Thick ,750mm WidthNegotiableMOQ: 1 Piece
-
Automatic Steel Cut To Length Line , 0-50m/min Line Speed 5T WeightNegotiableMOQ: 1 Set
-
Automatic Steel Cut To Length Line For Steel Coil 2mm Thick ,750mm WidthNegotiableMOQ: 1 Set
applied to:carbon cold and hot rolled steel thickness:2mm: Width(max):500mm Weight:5T Line speed:0-30m/min
Steel Cut To Length Line For Steel Coil , 2mm Thick ,500mm Width
Specifications:
|
applied to |
carbon cold and hot rolled steel |
|
material quality |
first class steel coils of the international standard |
|
tensile strength |
δb≤450Mpa |
|
thickness |
2mm |
|
Width(max) |
500mm |
|
slitting width tolerance |
±0.05mm |
|
Coil ID |
508mm |
|
Coil OD |
1400mm |
|
Weight |
5T |
|
diameter of leveling rollers |
φ50 |
|
distance of leveling rollers |
54 |
|
material of leveling roller |
GCr15,hardness:HRC55-60 |
|
total weight of machines |
around 5T |
|
diagonal tolerance |
≤±2mm/2000mm |
|
length tolerance |
≤±1mm/2000mm |
|
Line speed |
0-30m/min |
|
Power |
380V/50Hz/3Ph |
|
capacity |
around 22.5Kw |
Composed devices
1. decoiler
◆supporting steel rolls and uncoiling.
◆the core can ensure the expand range φ510 of the coils inner diameter
◆It adopts the hydraulic oil cylinder to make the decoiler expandable and fit to the inner diameter of coils. It is equipped with the cantilever .
◆can do forward and reverse running as well as do the decoiling with tension.
2. straightening machine
◆It is controlled by servo electromotor and used to regulate for high speed feed and precise length control
◆The operation is done at the control table with programmable control.
◆Drive model:15kw servo motor with precise decelerating transmission and synchronous to transport the belt to feed rollers
3．cutter
◆shear model: cut from up to down hydraulically which is cooperate with the signal direct from the feeder and shear automatically
◆Adopt gap adjusting design to cut the materials and can shear 3mm steel plate safely after heat treatment
4. hydraulic system
◆Ensure the using of every hydraulic parts
◆6.3-16Mp The working pressure of the hydraulic system is 6.3-16Mpa
5. electrical system
◆Adopt the PLC control mode ,It is controlled by LCD screen with fixed-length cutting by codes and count automatically .
Applications:
The production line is to cut cold steel rolling curling board,stainless curling board,aluminium curling intn different sizes of board materials
Competitive Advantage:
High cost performance, easy to operate
Send Inquiry to This Supplier
You May Also Like
-
Geared Beam Trolley, Manual Geared TrolleyUS$ 22 - 380MOQ: 20 Sets
-
Non Sparking Chain Hoist,non Sparking Crane,safety Manual Monorail Hoist,crab,freight ElevatorUS$ 697 - 1,300MOQ: 1 Piece
-
Electric Swing Stage Lifting Equipment HoistUS$ 1 - 1,000MOQ: 1 Set
-
LFM-A Manual Chain HoistNegotiableMOQ: 1
-
TH Type Chain Bucket Elevator TH Hoist MachineUS$ 1,000 - 20,000MOQ: 1 Set
-
Mini Lever HoistNegotiableMOQ: 500 Sets
-
2T Light Duty Single Gear With 2 Hooks Hand PullerUS$ 1 - 10MOQ: 500 Pieces
-
Windlass for VesselUS$ 5,500 - 25,000MOQ: 10 Sets
-
Electric Hoist ModelUS$ 35,000 - 100,000MOQ: 1 Set
-
CE Approved Winch HoistNegotiableMOQ: 100 Sets
