Contact Platform Support
Help CenterPrefabricated House Foam Insulated EPS Sandwich Panel Machine With Fly Saw Cutting
Related Products
-
35 KW Hidden Wall PU Sandwich Panel Machine With Non - Stop CuttingNegotiableMOQ: 1 Metric Ton -
Galvanized Color Steel PU Sandwich Panel Machine For Roof Wall PanelsNegotiableMOQ: 1 Kilogram
-
Rock Wool & PU Sandwich Panel Machine With Fly Saw Cutting for Prefab HouseNegotiableMOQ: 1 Piece
-
Corrugated Roofing PU Sandwich Panel Machine for Polyurethane Sandwich PanelsNegotiableMOQ: 1 Piece
-
Color Steel PU Sandwich Panel Machine for PU Wall Panel 300KWNegotiableMOQ: 1 Piece
Certification:CE
Prefabricated House Foam Insulated EPS Sandwich Panel Machine with Fly Saw Cutting
Description:
Composition of machine
1. Decoiler
2. Upper and lower forming machine
3. Pre-heating table
4. Reaction injection machine
5.Side chemical sealing installation
6. Double-belt laminator
7. Hot-air circulator
8. Non –stop cutter
9. Run out table
Quick Detail:
The line is a kind of specialized equipment used for producing color-steel-sided sandwich panels with
the middle layer of anti-combustion polyurethane.
The thickness of the produced sandwich panel ranges from 30 to 150 mm, the width between 700 and 1000 mm and the length on request. The production line is mainly applied to make wall and roof panels of steel
structure buildings, which can also make various other insulation panels if replacing facing sheet. Its
operation principle is as follows: Rigid poly foam raw materials, according to a certain blending ratio, are
delivered into mixing head to agitate through metering pump unit on the injection machine and then
uniformly injected onto the bottom facing sheet of sandwich panel. After the injection, the bottom facing
sheet shall move toward the double-belt conveyors together with panel’s top facing sheet.
Between the two conveyors, injected raw material is foamed and hardened into shape. At the end of the line, the formed sandwich panel is cut into preset length by an automatic tracking cutter.
Specifications:
|
Coil Material |
Thickness |
0.3-0.8mm |
|
Coil width |
Depend on customer’s requires |
|
|
Yield Strength |
250-550Mpa |
|
|
Material |
Color steel, galvanized steel |
|
|
Decoiler / Uncoiler |
Coil Width |
Max. 1250mm |
|
I.D |
510-610mm |
|
|
O.D |
Max. 1300mm |
|
|
Capability |
Max. 8Tons |
|
|
Decoiler type |
Manual / Hydraulic/Automatic |
|
|
Feeding & guiding |
Pinch feeding |
1 Units ( 2 Rollers ) |
|
guiding |
2 Rollers |
|
|
Cutting device |
Cutting motion |
Cutting adopts tracking cutting |
|
and saw (or fly saw) of the cutting machine can move transversely 1500mm, Cutting machine moves longitudinally and transversely along the slide way |
||
|
Cutting machine adopts one-side blade band saw manner,cutting and revolving after cutting. The cutting saw can revolve, so cutting in two directions is realizable |
||
|
Length Measuring |
BY encoder |
|
|
Cutting Tolerance |
1.5mm(per 3m) |
|
|
PU sandwich panel |
thickness |
25-100mm |
|
Standard Sandwich Panel Size |
max1100mm x 4000mm(Width x Length) |
|
|
Linear Speed of production |
2-5 m/min |
|
|
Reciprocating times of injection head per minute |
<60 |
|
|
Control system |
Production type: totally continuous production with PLC controlling |
|
|
Roll Forming Machine |
Forming Stations |
ABOUT 18-24steps |
|
Roller material |
45# steel, heat treatment |
|
|
Diameter |
Send Inquiry to This Supplier
You May Also Like
-
Slewing BearingNegotiableMOQ: 1 Piece
-
Slewing BearingNegotiableMOQ: 2700 Pieces
-
CRBT155A High Precision Crossed Roller Bearings for Humanoid Robot Joints 15x26x5mm BearingNegotiableMOQ: 1 Piece
-
Slewing Bearing Outer Ring 1200mm Inner Ring 1000mm Hardened Raceway 50Mn SteelNegotiableMOQ: 1 Piece
-
Four Point Contact Ball Slewing Bearing 010.30.630.12US$ 1,000 - 50,000MOQ: 1 Piece
-
Slewing Drive for Solar PanelNegotiableMOQ: 5 Pieces
-
Welding Machinery Slewing Bearing/RingUS$ 10 - 360MOQ: 1 Piece
-
Take Two Sides Sealing Ring Single Spherical Roller Bearing 20205MB-2SUNegotiableMOQ: 10 Pieces
-
ONA ORTS 200 High Precision High Speed Rotary Table Bearing P4/P2 for Direct Drive MotorNegotiableMOQ: 5 Pieces
-
OKLDF Thrust Angular Contact Ball Bearings Series OKLDF 150NegotiableMOQ: 5 Pieces
