Contact Platform Support
Help CenterProduce and Export Backing Special Backing Adhesives,liner Plate Wear Resistant Filling Material
Related Products
-
Produce and Export Wear Resistant Ceramic Adhesives,high Temperature Ceramic Special Anti Abrasion AdhesiveUS$ 9.5 - 9.5MOQ: 100 Kilograms -
We Sell and Export Small Particle Wear Resistant Coating,anti Wear Small Particle Coatings,abrasion Resistant Small Particle AdhesivesUS$ 9.8 - 9.8MOQ: 100 Metric Tons
-
Supply Slurry Pump Repair Coatings,slurry Pump Wear Resistant Special Coating,slurry Pump Anti Wear Protective CoatingsUS$ 9.6 - 9.6MOQ: 100 Metric Tons
-
Export Magnetic Separator Special Coating,anti Wear Protective Coatings,wear Resistant Anti Corrosion CoatingUS$ 9.8 - 9.8MOQ: 100 Metric Tons
-
Supply Wear Resistant Ceramic Adhesives,ceramic Special Anti Wear Adhesive,high Temperature Adhesives,anti Abrasion AdhesiveUS$ 9.6 - 9.6MOQ: 100 Kilograms
Packing specification of BD66 crusher wear resistant repair backing adhesive:
20Kg/group,packed in a iron drum.
performance features of BD66 crusher lining plate special filling adhesives：
Before curing：with good fluidity and strong filling ability,easy to operate,safety and environmental protection
After curing：with low shrinking percentage and good adhesion,bearing capacity is high,can tear down
Can cure at the low temperature of -5℃
With high impact resistant ability,especially suitable for the lining plate filling of coarse broken gyration type crusher
BD66 crusher anti wear repair filling material product usage:
BD66 crusher filling material (backing adhesives) is used in the filling/supporting between crusher lining plate and substrates,gravel barrels and jacket clearance,support cone and protective layer space,at the same time it can be used as buffer material,when the equipment suffers impacting or load vibration from broken ore, also used in the structural reinforcement,impact resistant vibration of ball mill wear resistant lining plate and cylinder clearance.
BD66 crusher abrasion resistant special filling material use technology:
1 Cleaning up and preparation: clean up the residual filling material on the surface of the cone, as well the grease dirt and smudge on the areas where touched with the adhesive,then fit up the cone and lining plate.Seal up the cone/lining plate fitting surface and annular ring with the adhesive tape etc,for fear of adhesive leakage,and protect the screw threads on the shafts if necessary,try to construct under the temperature of 5℃-30 ℃ during using.
2 Configure adhesive: Make the blender fix on low speed electric hand drill,Open the A component of BD66 crusher filling material,stir it for 1 minute,then pour the B component into the A component drum at the same time stir it with the electric blender,it's OK for color uniform,general stirring time is not more than 4 minutes.
Operation time: The total time from start mixing to finish filling is not more than 15 minutes(the data for 20℃)
3 Pouring: Make the mixed-up BD66 adhesive solution pour into it along the cone or a place of lining plate crack,easy to exhaust,in necessity,can make a cofferdam guide with plasticine etc,until overflow from the top of crack.Don’t pour into the adhesive without mixing uniformly(with different colors)
4 Curing: Place to cure for 12-24 hours,the temperature makes a big difference for the curing time,the curing speed is fast for high temperature,it can put into using to cure for 24 hours.
Send Inquiry to This Supplier
You May Also Like
-
Silicone & ProductsNegotiableMOQ: 2400 Kilograms
-
Solvent Based Thermoplastic TPU Adhesive for Fabric and Garment ApplicationUS$ 2.22MOQ: 1 Kilogram
-
50ml Loctite Screw Glue 290 Penetrating Medium Strengthanti-loose Metal Thread Locking Agent 222 243 242NegotiableMOQ: 1 Bag
-
Low Temperature Hot Melt Adhesive for Baby Diaper and NapkinsUS$ 2.8 - 3.2MOQ: 1 Ton
-
2016 Zhengzhou Factory Natural Artificial Stone Mold for Making Artificial StoneUS$ 1 - 30MOQ: 1000 Pieces
-
Hot Seal de High Quality Silicon Rubber Bushing From China O RingsUS$ 0.1 - 10MOQ: 100 Pieces
-
Aluminum Foil Self-adhesive TapeNegotiableMOQ: 100 Rolls
-
Glue Stick, Hot Melt Glue Stick, Glue Gun StickUS$ 2.9 - 2.9MOQ: 100 Kilograms
-
8 Pieces in a Pack Super GlueUS$ 0.33 - 0.33MOQ: 1800 Sets
-
Mmodified Corn StarchUS$ 675 - 705MOQ: 10 Tons
