Contact Platform Support
Help CenterAnaerobic Pipe Joint Compound 545, Pipe Thread Sealant 554
Related Products
-
Wholesale 50ml 545 Hydraulic Pneumatic Sealant Thread SealantUS$ 5 - 6MOQ: 3000 Pieces -
Permatex Quality Anaerobic Thread Locking Adhesive ThreadlockerUS$ 0.45 - 0.5MOQ: 3000 Pieces
-
Red Color High Strength Anaerobic Thread Locking Adhesive 271, Threadlocker 271US$ 0.45 - 0.5MOQ: 3000 Pieces
-
Removbale Thread Locking Adhesive, Medium Strength Anaerobic Threadlocker 242US$ 0.45 - 0.5MOQ: 3000 Pieces
-
Red Color Loctite Quality 271 Threadlocker Thread Locking AdhesiveUS$ 0.45 - 0.5MOQ: 3000 Pieces
Taisn 554 Thread sealant (Same as henkel loctite 554)
Technical data sheet
Product model |
Container (ml) |
color |
Viscosity (Mpa.s) |
Screw (mm) |
sealing pressure (Mpa) |
temperature range (℃) |
fixture time/full cure time |
545 |
50ml/250 |
purple |
14000 |
M36 |
69 |
-50~150 |
40min/24hrs |
554 |
50ml/250 |
red |
2500 |
M80 |
69 |
-50~150 |
40min/24hrs |
567 |
50ml/250 |
white |
55000 |
M80 |
69 |
-50~200 |
20min/24hrs |
568 |
50ml/250 |
yellowish |
400 |
M36 |
69 |
-50~150 |
20min/24hrs |
569 |
50ml/250 |
brown |
400 |
M36 |
69 |
-50~150 |
30min/24hrs |
577 |
50ml/250 |
yellow |
24000 |
M80 |
69 |
-50~150 |
20min/12hrs |
554 Piping thread sealant features:
Refrigerant sealant.
Excellent chemicls resistance,especially for refrigeration system.
For sealing up to M80 of piping threads.
Can used on aggresive chemicals system.
Use and storage:
1) Oil removal, clean and dry on the thread surface.
2) The thread standard (clearance, thread, screwing in more than 5 threads).Drop the glue in the external thread, the first thread can't glue, glue above 3 threads, screw in the tightening of specified torque, or the specified direction.
3) Fully cured by 24 hours, cure slowly below 15 ℃ and on inactive surface, use 7649 to accelerate curing.
4) Usually assembled with hand tools, 2 inches parts can be heated to 260 ℃ to remove.
Note: Should not be used on plastic, cannot be used for pure oxygen and rich oxygen sealing system.Tube need to keep enough oxygen to keep it liquid.
Contact Information:
Send Inquiry to This Supplier
You May Also Like
-
Removbale Thread Locking Adhesive, Medium Strength Loctite Type Anaerobic Threadlocker 242US$ 0.45 - 0.5MOQ: 3000 Pieces
-
Red Color Medium Strength Anaerobic Thread Locking Adhesive 262, Loctite Type Threadlocker 262US$ 0.45 - 0.5MOQ: 3000 Pieces
-
Loctite Quality Blue Anaerobic Thread Locking Adhesive Medium Strength Threadlocker 243US$ 0.45 - 0.5MOQ: 3000 Pieces
-
Loctite Type Purple Color Anaerobic Threadlocker 222, Low Strength Thread Locking Adhesive 222US$ 0.45 - 0.5MOQ: 3000 Pieces
-
Loctite Type Red Color 277 Thread Locking Adhesive, Permanent Seal Threadlocker 277US$ 0.45 - 0.5MOQ: 3000 Pieces
-
Low Viscosity Green Color Threadlocker Thread Locking Adhesive 290, Sand Casting and Weld Seam Sealant 290US$ 0.45 - 0.5MOQ: 3000 Pieces
-
Yellow Color High Strength Anaerobic Threadlocker 340 Thread Locking AdhesiveUS$ 0.45 - 0.5MOQ: 3000 Pieces
-
Loctite Type High Temperature Resistant Anaerobic Flange Sealant 510US$ 3.5 - 4MOQ: 3000 Pieces
-
Loctite Type High Temperature Resistant Anaerobic Flange Sealant 515US$ 3.5 - 4MOQ: 3000 Pieces
-
Loctite Quality Anaerobic Flange Gasket Sealant 518US$ 3.5 - 4MOQ: 3000 Pieces
