Contact Platform Support
Help CenterSolar Panel PV Module Surface Abrasions Detection Machine/anti-damage Testing Equipment
Related Products
-
Helmet Goggles Impact Testing Machine /Goggles Liner Impact Testing EquipmentUS$ 7,857.14 - 7,857.14MOQ: 1 Set -
ECE R22.05 Helmet Motorcycle Roll-off Testing Machine Judge the Stability of Helmet Wear HelmetUS$ 1,666.66 - 1,666.66MOQ: 1 Set
-
EPS Density Testing Machine/testing Equipment /helmet EPS Testing ApparatusUS$ 2,941.17 - 3,235.29MOQ: 1 Set
-
ECE Dynamic Strap Retention Testing MachineUS$ 2,647 - 3,382MOQ: 1 Set
-
ECE R22.05 EN1078 EN1077 Standard Computer Control Shock Absorption Accelerometer Impact Testing Machine for HelmetUS$ 26,470.58 - 29,411.76MOQ: 1 Set
Solar panel PV module surface abrasions detection machine/anti-damage testing equipment
Standard
According to IEC61730 testing standard requirement
Purpose
To determine whether any front and rear surfaces of the pv module made of polymeric materials are capable of withstanding routine handling during installation and maintenance without exposing personnel to the danger of electric shock
The Mainly specifications
Test stand frame |
1.The raw materials: Aluminum profile ( Firm and Antirust) 2.The testing standard dimension: satisfy 2.0m×1.0m pv modules ( adjustable, suit for different pv modules dimension) 3.Included the Tracking pulley wheel |
|
Testing Fixture |
1.The raw material:Use adopt carbon steel blade 2.The steel blade thickness:0.64mm±0.05mm ( It’s suffficiently rigid as not to be bend sideways during the test) 3.The top angle of steel blade :90±2° and with rounded with radius 0.115mm±0.025mm 4.The blade supply the force : 8.9N±0.5N
|
| The test fixture speed | 150±30mm/s |
| Control ways and display ways | Touch screen |
Testing Procedure
1. Position the PV Module horixontally with the test surface facing upward
2. The test fixture is to be placed on the surface for 1 min and then drawn across the surface of the pv module at a speed of 150mm/s±30mm/s,repeat the procedure five times in different directions considering the most critical points
3.Repeat step 1 and step 2 for other polymeric surface of the pv module if applicable
Fixture imges show
Send Inquiry to This Supplier
You May Also Like
-
Endress+Hauser E+H Compact Conductivity Device Smartec CLD18-BGGENegotiableMOQ: 1 Piece
-
Fully Automatic ASTM D93 Diesel Oil Close Cup Flash Point Tester for Petroleum ProductsUS$ 999 - 1999MOQ: 1 Set
-
Universal Testing MachineNegotiableMOQ: 2500 Pieces
-
Computer Control Hydraulic Universal Testing MachineNegotiableMOQ: 1 Set
-
Hydraulic Plastic Flange Connections Cover Plugs SHF SeriesUS$ 0.22 - 0.28MOQ: 2500 Pieces
-
Gates 550C 550U U550 U-550 U508 U-508 Japan Unitta U-550 Belt Tension Meter New U-508 Belt Tension Meter Upgraded Version U550US$ 1 - 900MOQ: 1 Piece
-
Vertical Rod Type Floor-type Electrostatic Discharge Tester / Electrostatic Discharge Device for Human BodyUS$ 20 - 93MOQ: 1 Piece
-
Analytical Balanace.scale ,weichengya Laboratory SupplierUS$ 10 - 35MOQ: 10 Sets
-
Smart MD-3051 Online Density Meter With 4-20mA OutputUS$ 2,380 - 2,500MOQ: 1 Unit
-
5W-300W Sun Simulator Watt Testing 30% Off / Xenon Lamp Sun Simulator Free Sent / Sun Simulator TestingUS$ 7,500 - 10,000MOQ: 1 Set
