Contact Platform Support
Help CenterISH100/30058/0/0/00/0/00/01/00 Servo Driver
Related Products
-
MCP-1004 Power Management ChipNegotiableMOQ: 1 Bag -
05701-A-0301 Channel Control CardNegotiableMOQ: 1 Bag
-
HIEE405246R0002 UNS0867A-P,V2 Distributed Control SystemNegotiableMOQ: 1 Bag
-
WPM311.03400 Programmable ControllerNegotiableMOQ: 1 Bag
-
BCU-12 Spare Parts Control UnitNegotiableMOQ: 1 Bag
GEFRAN module R-TC8, Italy
Product Overview:
The R-TC8 module has a processor with 8 optically isolated temperature inputs that can be configured through software, and 16 digital outputs for temperature control.
8 inputs for J and K type thermocouples. The acquisition time of 8 channels is less than 120 ms.
The scale is one tenth of a degree.
This module has 16 24 VDC digital outputs, PNP type, with a maximum current of 0.5 A per channel, typically used for heating and/or cooling.
Any available output can also be used to control the machine cycle.
All outputs have current cycling circuits for sensing loads, and have short circuit, overload, and overheat protection.
There is also a 24 VDC NPN digital input to measure the period of the applied signal.
The maximum input frequency is 1 kHz.
This module is installed on R-BUS (x) and receives power from it.
Product features:
● 8 optical isolation inputs for thermocouples
J, K type thermocouples
16 optical isolated digital outputs
1 optical isolation frequency input 1,5kHz
● Software configuration for TC or TR input
● Diagnostic LEDs for power, output, and alarms
● Provide detachable connectors
● Compliant with UL508
e rail fastening, in accordance with EN 50022-35 standard
Gross weight (g): 206,8
Contact information: 15359293870
WhatsApp:+86 15359293870
Contact person: KELLY
Email: geabbdcs@gmail.com 386353502@qq.com
Official website:
TBUS DIN rail for expansion modules and bus couplers
Rated control circuit power voltage US: 18 V DC 30 V DC (including all tolerances, including residual voltage)
Rated control circuit power voltage US: 24 V DC (A1/A2)
Rated control power supply current IS: typical value 110 mA
Limit continuous current: maximum 6 A (for loop current paths A1/A1 and A2/A2)
Delay time: typical value of 20 ms (depending on load, in case of voltage drop of US)
Protection circuit: Yes, within the operating voltage limit range
Status display: 3x green LED, 1x red LED
Input Description: Number, HTL type
Input quantity: 10 (dual channel, up to SIL 3)
20 (single channel, up to SIL 2)
Input voltage range, "0" signal: 0 V DC 5 V DC (for safe shutdown)
Input voltage range, "1" signal: 11 V DC 30 V DC
Cable length: maximum 2000 m
Status display: 20 x green LED (1 LED per input)
Power consumption: typical value 4 mA
Number of outputs: 4 (safe semiconductor output, up to Cat. 4 (according to EN ISO 13849-1)
2 (negative switching output)
Precautions for protecting the circuit: Yes, within the operating voltage limit range
Short circuit protection: Yes
Output voltage:
Leakage current: maximum 2 mA
Maximum capacitive load: maximum 1 µ F (electronic components)
Limit continuous current: 2 A (per channel, see derating)
Send Inquiry to This Supplier
You May Also Like
-
F7130A The Central ControllerNegotiableMOQ: 1 Bag
-
CP451-50 Yokogawa Central ControllerNegotiableMOQ: 1 Bag
-
UG-10D Governor ModuleNegotiableMOQ: 1 Bag
-
5501-376 Robot Spare PartsNegotiableMOQ: 1 Bag
-
8200-1301 Steam Turbine Electromechanical GovernorNegotiableMOQ: 1 Bag
-
3350-MBP Communication InterfaceNegotiableMOQ: 1 Bag
-
FBM230 P0926GU Control ProcessorNegotiableMOQ: 1 Bag
-
RDCU-12C Hydraulic Servo ModuleNegotiableMOQ: 1 Bag
-
DSMB-01C Inverter Drive Power BoardNegotiableMOQ: 1 Bag
-
SE3007 Controller SystemNegotiableMOQ: 1 Bag
