IP227 Jet Fuel Silver Strip Corrosion Tester
Silver Strip Corrosion Tester IP227
Product model: JF0023A
Product Introduction

The test principle : immerse the polished silver piece in the specified sample for 4h or longer as specified in the product standard. At the end of the test, the silver flakes were removed from the samples, and the degree of corrosion was assessed after washing.
Technical Parameter
1. Applicable standard: IP227, SH/T0023
2. Refrigeration method: Compressor refrigeration
3. Temperature control method: Digital display PID thermostat
4. Circulation method: Magnetic pump circulation
5. Temperature control range: 50±0.2℃, 20±0.5℃
6. Heating method: Electric heating tube heating
7. Working unit: 4-hole operation
8. Power supply: AC220/240V, 50/60HZ
9. HS Code: 9027899090
Performance characteristics
1. Fully enclosed compressor refrigeration to ensure sufficient cold supply
2. The glass test tube meets the standard requirements
3. Stainless steel heater, heating bath
4. Microcomputer temperature controller, digital display, high ±0.1℃ PT100 sensor
5. The magnetic pump circulates the cooling medium without noise
6. Digital display of working hours, with phoenix buzzer to remind
7. Split structure, easy to move; standard silver test piece.
Q: What services are supported?
A: Free lifetime online technical services are supported.
2.Q: How long is the warranty period of the equipment sold?
A: The warranty is for twelve months
3.Q: How long is the delivery time?
A: Within 3 working days after receiving the down payment for the products in stock, and the specific delivery time depends on the order quantity and products.
4.Q: What is the minimum order quantity?
A: For the equipment, the minimum order quantity will be 1 set. For the lab parts, please contact us for final confirmation.
5.Q: What’s your transportation?
A: Express, air, sea transportation are supported, and appointed forwarders are also supported.
6.Q: Do you accept customization service? Can I have my logo on the machine?
A:Yes, of course. We can not only offer standard machines, but also customized machines according to your requirements. And we can also put your logo on the machine.
7.Q: How to install and use the product?
A: Operating instructions or video will be sent to you online or by email. Most of our machine is shipped with a whole part, which means it is already installed, all you need to do is to connect the power cable and start to use.
8.Q: What’s the trade term and delivery term?
A: Most of the common trade terms are supported, like CIF, FOB, CFR and so on . We have ordinary instruments in stock, the delivery time is 1-7 working days. If there are not in stock, the delivery time is 15-30 working days after the down payment. If you are in urgent, we can consider making a special arrangement for you.
Send Inquiry to This Supplier
You May Also Like
-
ASTM D1657 Density or Relative Density of Liquefied Petroleum Gas TesterUS$ 2800 - 3200MOQ: 1 Unit
-
ASTM D2420 Hydrogen Sulfide in Liquefied Petroleum Gases TesterUS$ 2700 - 3200MOQ: 1 Unit
-
ASTM D4377 Automatic Digital Display Trace Moisture Tester (Karl Fischer Method) Coulometric TitrationUS$ 4000 - 5000MOQ: 1 Unit
-
ASTM D6371 Cold Filter Plugging Point of Diesel Fuel Tester CFPPUS$ 1800 - 2100MOQ: 1 Unit
-
ASTM D6371 Auto Cold Filter Plugging Point of Diesel Fuel Tester CFPPUS$ 8000 - 9000MOQ: 1 Unit
-
Petroleum Products Water Soluble Acid and Alkali Tester Acidity MeterUS$ 700 - 780MOQ: 1 Unit
-
ASTM D95 Water in Petroleum Products by Distillation TesterUS$ 360 - 450MOQ: 1 Unit
-
ASTM D93 Flash Point by Pensky-Martens Closed Cup TesterUS$ 530 - 630MOQ: 1 Unit
-
ASTM D93 Automatic Pensky-Martens Closed Cup Flash Point Tester PMCC MethodUS$ 5800 - 6700MOQ: 1 Unit
-
ASTM D1534 Auto Acid Number in Transformer and Turbine Oils in Service by BTB MethodUS$ 6000 - 6300MOQ: 1 Unit

