Contact Platform Support
Help CenterABB 086370-001 – Legacy Bailey INFI 90 Spare Module for Stable DCS Maintenance
Related Products
-
ABB 100472-012 – Plug-in Control Board for Legacy ABB Drive and DCS CabinetsNegotiableMOQ: 1 Combo -
ABB 1MRB150003R0002 – Control/Feedback Board for ABB Drive and Motor SystemsNegotiableMOQ: 1 Combo
-
ABB 1MRB150005R0001 — Motor Resolver Assembly for Precise Speed/Position FeedbackNegotiableMOQ: 1 Combo
-
ABB 1MRB150015R1 – OEM Replacement Component for ABB Motors/Drives MaintenanceNegotiableMOQ: 1 Combo
-
ABB 1MRB150020R0712 – OEM Bearing Component for ABB Large AC MotorsNegotiableMOQ: 1 Combo
The ABB 086370-001 is a Bailey heritage spare used in INFI 90/NET90 control cabinets, typically applied as a board-level module or termination/adapter within process I/O and controller bays. From my experience, engineers keep this part on hand to support long-running plants where form/fit/function compatibility matters more than cosmetic revisions.
If you’re extending the life of an installed ABB Bailey DCS, this code helps reduce downtime during preventive swaps and unplanned outages. It seems to be most useful in facilities that standardize on OEM part codes across multiple units and revisions.
Key featuresForm/fit/function match for Bailey INFI 90 – Designed to drop into legacy cabinets without mechanical rework.
OEM traceability – Part code alignment simplifies MRO stocking and cross-plant standardization.
Stable operation in control-room environments – Typically suited for 0–60°C cabinet conditions with proper ventilation.
Service-friendly – Supports quick swap-out practices to minimize mean-time-to-repair during trips or turnarounds.
Lifecycle support – Commonly used in long-term migration paths where you upgrade in phases rather than rip-and-replace.
| Brand / Model | ABB 086370-001 (Bailey INFI 90 family) |
| System compatibility | Legacy ABB Bailey INFI 90 / NET90 cabinets (verify against site BOM/revision) |
| Power requirements | Varies by application; in many cases powered via cabinet backplane or not separately powered (confirm on your drawing set) |
| Operating temperature | Typically 0 to +60°C (control room), non-condensing |
| Signal I/O | Dependent on the paired I/O/controller function; match to the associated module type and terminal plan |
| Interfaces | Backplane/termination connections per Bailey layout; no external fieldbus on the part itself (typical) |
| Installation method | Cabinet-mounted within INFI 90 bays; follow the original mounting and wiring diagrams |
Plants that still rely on Bailey/ABB DCS platforms typically standardize on this code for spares coverage. You might notice it on BOMs tied to:
Refining and petrochemicals – sustaining control loops and critical interlocks.
Power generation – boiler/turbine auxiliaries and balance-of-plant I/O.
Pulp & paper – continuous process sections where change control is tight.
Metals and mining – legacy lines where downtime penalties are high.
Pharma and specialty chemicals – validated systems where requalification is costly.
Risk reduction – Staying with the original part code avoids unexpected wiring or logic changes during a maintenance window.
Cost control – In many cases, a like-for-like spare defers major retrofit spend without compromising reliability.
Compatibility assurance – Matches existing cabinet layouts, terminal plans, and documentation sets, simplifying QA sign-off.
Supportability – Easier for technicians to troubleshoot using familiar manuals and known-good test procedures.
Environment – Install in a clean, dry control cabinet meeting IEC/UL enclosure standards; maintain moderate airflow and avoid hot spots near power supplies.
ESD handling – Use wrist straps, ESD mats, and antistatic packaging; I’ve seen intermittent faults traced back to casual handling.
Grounding & shielding – Follow the original Bailey grounding scheme; keep shield drains consistent to prevent noise issues.
Wiring checks – Verify terminal torque and identification against drawings before energizing; a 60‑second check often saves hours later.
Routine care – Periodically inspect connectors, clean dust with dry air, and document any revisions. Firmware isn’t typically applicable for passive assemblies, but update controller/engineering station firmware as part of broader maintenance.
Standards – Original ABB/Bailey manufacturing and quality processes; CE/UL markings apply by module type and production era (verify label on your unit).
RoHS/Reach – Legacy parts may predate current directives; compliance status should be confirmed if required by site policy.
Warranty – Typical supply is backed by a 12‑month limited warranty on form, fit, and function when installed by qualified personnel.
This is not an exhaustive list, but in real sites we frequently see this code maintained alongside common INFI 90 modules such as controller boards, analog/digital I/O modules, and termination units. If you can share your cabinet numbers or BOM snapshot, we can validate compatibility before shipment.
Send Inquiry to This Supplier
You May Also Like
-
ABB 1MRB150020R1102 – OEM Interface/Feedback Board for ABB Drive SystemsNegotiableMOQ: 1 Combo
-
ABB 1MRB150021R0116 – Motor Feedback Unit for Precise Speed/Position ControlNegotiableMOQ: 1 Combo
-
ABB 1MRB150022 R0002Y – OEM Control/feedback Module for ABB Drive and Motor SystemsNegotiableMOQ: 1 Combo
-
ABB 1MRB150051R1 – Genuine Motor Bearing (Factory‑coded Spare for ABB Motors)NegotiableMOQ: 1 Combo
-
ABB 1MRB178009R0001 – OEM Spare Module for Motor/Drive Feedback and Assembly ReplacementNegotiableMOQ: 1 Combo
-
ABB 1MRK001967-AA – Field Accessory for Relion Protection & Control IED CommissioningNegotiableMOQ: 1 Combo
-
ABB 1SVR011700R0000 – Compact Control/Monitoring Relay for Reliable Panel AutomationNegotiableMOQ: 1 Combo
-
ABB 1MRK002133-ABr02 – Hardware Module for Relion Protection IEDsNegotiableMOQ: 1 Combo
-
ABB 1SFB536068D1011 – Industrial Contactor for Dependable Motor and Power SwitchingNegotiableMOQ: 1 Combo
-
ABB 1SVR011718R2500 – Compact Electronic Monitoring Relay for Reliable Automation ControlNegotiableMOQ: 1 Combo
