Contact Platform Support
Help CenterHONEYWELL CV-DINA-32NAIO – High‑density DIN‑rail Analog I/O for Machine and Process Control
Related Products
-
HONEYWELL CC-PWRN01 Power Module – Reliable Backplane Power for Series C/Experion NodesUS$ 216.00MOQ: 1 Blade -
HONEYWELL FC-BKM-0001 Battery & Key Switch Module for Control and Fire Panel Power ManagementUS$ 1216.00MOQ: 1 Blade
-
Honeywell 05704-A-0145 Four Channel Control Card: Your Reliable Workhorse for Industrial Process ControlUS$ 216.00MOQ: 1 Blade
-
Honeywell 2MLR-CPUHT Redundant CPU Module: Keep Critical Processes Running Through FailuresUS$ 216.00MOQ: 1 Blade
-
Honeywell 51301874-100 Thermocouple Multiplexer Logic Board: Reliable Signal Management for Critical ProcessesUS$ 216.00MOQ: 1 Blade
The HONEYWELL CV-DINA-32NAIO is a compact, DIN‑rail mounted analog I/O module designed for high channel density and clean panel layouts. It typically serves mixed analog input/output applications—consolidating voltage and current loops in one place and feeding your PLC/DCS over a DIN backplane or coupler. From my experience, it’s a practical fit when you need lots of analog points without expanding to a full rack system.
Key Features32-channel analog density – Ideal when panel space is tight and the application demands numerous analog points in a single DIN footprint.
Mixed AI/AO capability – In many cases, channels can be assigned as inputs or outputs to simplify project changes and spares.
Common industrial ranges – Typically supports 0–10 V and 4–20 mA signals for process, HVAC and OEM machinery loops.
DIN‑rail, field‑friendly terminals – Front-access wiring and clear labeling help reduce commissioning time and small wiring mistakes.
Status/diagnostics indicators – You might notice quick fault isolation with per‑module LEDs and basic self‑diagnostics, which speeds troubleshooting.
Seamless fit with Honeywell controllers – Usually integrates via a system backplane or coupler, so you keep a consistent hardware and engineering environment.
Robust industrial design – Designed for typical control cabinets; supports standard temperature ranges and reliable operation in day‑to‑day plant conditions.
| Brand / Model | HONEYWELL / CV-DINA-32NAIO |
| Power Requirements | 24 VDC nominal (typ.), sizing per system design and channel load |
| Signal I/O Types | Up to 32 analog channels (inputs and/or outputs, model/application dependent); commonly 0–10 V and 4–20 mA |
| Communication Interfaces | Typically via Honeywell DIN backplane or head/coupler module to the controller network |
| Installation Method | 35 mm DIN‑rail; front‑access screw terminals (removable terminal blocks on some builds) |
| Operating Temperature | Typical industrial range suitable for control cabinets; confirm per nameplate |
| Dimensions & Weight | Compact DIN module footprint; sized for shallow panels; exact values vary by revision |
HVAC and building utilities – Chilled water, AHUs, VFD analog references, and temperature loops.
Water & wastewater – Flow, level, pressure and dosing control with mixed AI/AO needs on skids.
Process skids & OEM equipment – Compact panels where high analog density cuts footprint and wiring time.
Packaging and material handling – Analog speed setpoints, tension control, and recipe-driven outputs.
Energy & utilities – Boiler/BOP analog monitoring where reliability and quick diagnostics matter.
Panel space savings – 32 analog points per module usually means fewer rails, fewer enclosures, lower total cost.
Flexible I/O assignment – Adjust channel roles (AI/AO) as the design evolves; helpful in fast‑moving projects.
Lifecycle alignment – Staying within the Honeywell ecosystem streamlines spares, training, and long‑term maintenance.
Procurement efficiency – One part to cover a range of analog needs; reduces SKU count and stocking risk.
Service and support – Access to Honeywell’s global support structure and documentation, which is a real benefit in many cases.
Cabinet & ventilation – Mount on 35 mm DIN‑rail in a clean, dry enclosure. Keep airflow paths clear; avoid heat sources directly beneath the module.
Power & grounding – Use a regulated 24 VDC supply sized with margin for peak loads. Bond DIN rail to cabinet ground; keep analog returns clean.
Wiring practices – Use shielded twisted pair for analog signals. Separate analog from power and relay wiring. Terminate shields at a single point to reduce noise.
Safety – De‑energize before wiring. Verify polarity and signal range per channel prior to loop check.
Commissioning – Map channels in the controller/engineering tool; perform a loop test (4–20 mA and 0–10 V) and document scaling.
Routine maintenance – Periodically check terminal torque, clean dust with dry air, verify signal integrity, and apply firmware/config updates when provided by Honeywell.
CE and RoHS compliance for industrial control environments (typical for this Honeywell family).
UL/cUL listing appears on many shipments; verify on the module nameplate for your exact revision.
Manufacturer’s warranty: commonly 12 months from shipment; extended service agreements available through authorized channels.
24 VDC industrial power supply (2–3 A with headroom), DIN‑rail mount.
Shielded analog signal cable and ferrules for clean terminations.
Surge protection/fusing on field loops to protect channel electronics.
Removable terminal blocks and wire markers to speed maintenance.
If you’re matching the CV-DINA-32NAIO to an existing Honeywell controller or coupler, share your controller model and network details. We’ll check channel allocation, power budget, and the exact firmware compatibility before you place the order.
Send Inquiry to This Supplier
You May Also Like
-
Honeywell 05704-A-0146 Fire Control Card: Your System's Critical Safety SentinelUS$ 216.00MOQ: 1 Blade
-
Honeywell 51308351-175: Your Reliable Analog Output Workhorse for Experion PKS SystemsUS$ 216.00MOQ: 1 Blade
-
Honeywell 51308371-175 Digital Output Module: Precision Control for Critical Industrial SwitchingUS$ 216.00MOQ: 1 Blade
-
Honeywell CC-TAIX01 Analog Input Module: Reliable Signal Acquisition for Industrial ProcessesUS$ 216.00MOQ: 1 Blade
-
Honeywell CC-TAIX51 C300 Controller: Your Uninterrupted Process BackboneUS$ 216.00MOQ: 1 Blade
-
Honeywell CC-TAON11: Your Reliable Analog Output Workhorse for Process ControlUS$ 216.00MOQ: 1 Blade
-
Honeywell CC-TAOX01: Your Analog Output Workhorse for Tight Control LoopsUS$ 216.00MOQ: 1 Blade
-
Honeywell CC-TAOX11 Analog Output Module: Precision Control for Demanding Industrial SystemsUS$ 216.00MOQ: 1 Blade
-
Honeywell CC-TDIL01 Digital Input Module: Reliable Signal Capture for Industrial Control SystemsUS$ 216.00MOQ: 1 Blade
-
Honeywell CC-TDOB01: Your Workhorse for Reliable Digital Output ControlUS$ 216.00MOQ: 1 Blade
