Contact Platform Support
Help CenterABB E3EB HENF315129R1 Industrial Control Module – Field‑replaceable Board for ABB Drive/automation Systems
Related Products
-
ABB HENF452750R1 (E3EFa) Automation Controller Module – OEM Control Board for Drive CabinetsUS$ 3216.00MOQ: 1 Blade -
E3EP HENF315276R1 PLC – Compact Control for Fast, Reliable Machine AutomationUS$ 3216.00MOQ: 1 Blade
-
ABB FI820F (3BDH000031R1) Fieldbus Module – Stable PROFIBUS DP Connectivity for Freelance AC 800FUS$ 1216.00MOQ: 1 Blade
-
ABB FI830F (3BDH000032R1) – Core Bus Communication Module for PROFIBUS DP in Freelance AC 800FUS$ 1216.00MOQ: 1 Blade
-
ABB G3EB HENF315768R1 – High‑performance Industrial Control Module for ABB DCS/automation SystemsUS$ 2560.00MOQ: 1 Blade
Warranty: 365 days
Lead time: 1 week if in stock, no more than 1 month at the latest
Payment: 50% advance payment; full balance prior to delivery
Express options: FedEx, UPS, DHL
Packaging: ESD-safe, foam-protected, and sealed for transit
Traceability: Serial/part number recorded on the commercial invoice
Form-fit replacement: E3EB assembly with part code HENF315129R1, designed to drop into the original ABB hardware slot.
Stable low-voltage logic: Powered by the host system’s internal supply (typically 24 VDC), reducing external wiring.
Quick changeover: Board-level swap minimizes downtime; no cabinet drilling or layout changes in most cases.
Factory tested: Each unit is function-checked for stable operation before shipment, which seems to cut commissioning time.
Service-friendly: Clear labeling and connector coding help avoid wiring mistakes during maintenance.
| Brand / Model | ABB E3EB HENF315129R1 |
| HS Code | 85389000 (Parts for electrical control equipment) |
| Power Requirements | Supplied by host system; typically 24 VDC logic rail |
| Operating Temperature | 0 to +55 °C (typical for cabinet-mounted control boards) |
| Signal I/O Types | Handled via backplane/board connectors; digital and analog I/O availability depends on the host platform |
| Communication Interfaces | Provided by the installed system; common setups include RS‑485 or fieldbus modules on the host |
| Installation Method | Internal board replacement; mounts on standoffs/connectors inside the ABB equipment |
This module is commonly used in ABB low-voltage drive cabinets and related automation packages. Typical scenarios include:
Keeping production lines running in steel, paper, and chemicals where a drive board failure would halt upstream processes.
Modernizing or stabilizing legacy motion cells without changing motors or field wiring.
Critical utilities (pumps, fans, compressors) in water treatment and HVAC plants that require quick board-level servicing.
Reliability: Factory-tested spare helps reduce unplanned stoppages after a board fault.
Compatibility: Form-fit match to E3EB assembly with code HENF315129R1, avoiding cabinet rework.
Cost control: Board replacement is typically far cheaper than a complete drive/controller swap.
Support readiness: We can help confirm part compatibility by photos or nameplate data to avoid mismatches.
Environment: Install in a clean, dry control cabinet with adequate ventilation; keep ambient within 0–55 °C.
ESD handling: Use a grounded wrist strap and ESD mat; avoid touching component leads and edge connectors.
Wiring: Power down and discharge DC bus before replacement. Reseat ribbon/plug connectors firmly; verify keying.
Commissioning: After installation, perform system self-tests. Load or verify the correct firmware/config if the host requires it.
Routine care: Periodically inspect for dust; clean with dry air at low pressure. Check connector tightness during scheduled shutdowns.
Meets typical CE requirements for EMC/safety when installed in compliant systems.
UL recognition and RoHS conformity are commonly observed on ABB board-level spares.
Manufactured under ISO 9001 quality systems.
Seller warranty: 12 months (365 days).
“Swapped the HENF315129R1 board during a planned stop; the drive came up clean on the first boot. No wiring changes, which saved us a night shift.” — Maintenance Supervisor, metals processing
Supporting Components You Might Also NeedESD-safe mounting hardware and standoffs for the E3EB position
Replacement ribbon/edge connectors if existing ones show wear
Host firmware pack or configuration backup for fast commissioning
If you’d like, share a photo of your nameplate and the existing board label. We’ll cross-check E3EB and HENF315129R1 against your drive/controller revision to confirm a clean fit before you place the order.
Send Inquiry to This Supplier
You May Also Like
-
ABB G3EFa HENF450295R2 Controller – Compact CPU Module for Stable Plant Control and Fast ReplacementUS$ 2560.00MOQ: 1 Blade
-
ABB G3ENa HENF450268R2 Controller – Ethernet-enabled Control Module for Modernizing and Maintaining Plant SystemsUS$ 2560.00MOQ: 1 Blade
-
ABB G3FCB HENF458568R1 – Field/Process Control Module for ABB Drive and DCS CabinetsUS$ 2560.00MOQ: 1 Blade
-
ABB G3FK HENF452878R1 Industrial Automation Control Module – Stable Control and I/O Interfacing for Demanding PlantsUS$ 2560.00MOQ: 1 Blade
-
HESG216876 Multi-Channel Vibration Meter: Stop Guessing When Bearings Are FailingUS$ 3300.00MOQ: 1 Blade
-
ABB NF93-2 HESG440280R2: Your Reliable Workhorse for Complex Automation TasksUS$ 9150 - 9500MOQ: 1 Piece
-
ABB NMTU-21C 3BSE017429R1 Thermistor Power Module: Stop Guessing When Motors OverheatUS$ 9150 - 9500MOQ: 1 Piece
-
ABB O3EX-HENF315845R2: Dual-Network Expansion for Seamless Plant IntegrationUS$ 3216.00MOQ: 1 Blade
-
ABB P3EDb HENF452778R1: Your Reliable PLC I/O WorkhorseUS$ 9150 - 9500MOQ: 1 Piece
-
ABB P5EAa HENF206350R2 Industrial Control ModuleUS$ 9150 - 9500MOQ: 1 Piece
