Contact Platform Support
Help CenterIndustrial Cooling System Cleaning: EQOBRUSH Ensures Optimal Heat Transfer
Related Products
-
EQOBRUSH Online Brush Cleaning System for Condenser Tubes DN300US$ 9000 - 20000MOQ: 1 Set -
Online Brush Cleaning System for Chiller Condenser Tubes CleaningUS$ 9000 - 19000MOQ: 1 Set
-
Shell and Tube Heat Exchanger Automatic Online Brush Cleaning SystemUS$ 9000 - 20000MOQ: 1 Set
-
Online Automatic Cleaning System for Shell and Tube Condenser Heat ExchangersUS$ 9000 - 20000MOQ: 1 Set
-
Condenser Tubes Online Brushing SystemUS$ 8000 - 20000MOQ: 1 Set
Industrial Cooling System Cleaning: EQOBRUSH Ensures Optimal Heat Transfer
EQOBRUSH automatic online tube brushing system allows the chiller condenser and heat exchange tubes to be cleaned without downtime. Keep the tubes clean from scaling and fouling on the tube’s inner wall, thereby improving the heat exchange efficiency of the condenser and heat-exchanger, keeping the heat exchange equipment in stable performance and continuous long-term energy saving.
A standard system includes Cleaning Brush, Catch basket, Flow reversal valve, Actuator and Control panel
Cleaning brush: Nylon bristles and SS winding wire, makes the brush can withstand a maximum temperature of 100 degrees Celsius. can be applied to urban water, ground water, surface water and seawater without corrosion. As a Consumables component, the service life-span is up to 5 years (it is generally recommended to do the inspection every year find out if they are in good status, brushes available to be made in special material for the particular condition.)
Catch basket: made of PE, acid and alkali resistant, organic solvent resistant, good electrical insulation, can be used in water temperature of -20 to 70 degrees Celsius.
Actuator: A heavy-duty industrial design actuator with a microswitch that available for recording the final position of the operation and provides precise power for flow reversing in a short time.
Control panel: It can reset the cleaning cycle selection from 15 minutes to 24 hours. It also includes: position indication, alarm indication, cycle counter, cable connector and so on. The operation of the cleaning system is completely independent and does not cause any interference to the chiller.
Send Inquiry to This Supplier
You May Also Like
-
Automatic Online Cleaning System for Condenser TubesUS$ 9000 - 25000MOQ: 1 Set
-
New York Automatic Tubes Brushing for Heat Exchanger CondenserUS$ 8000 - 25000MOQ: 1 Set
-
Hong Kong Automatic Tubes Brushing for Heat Exchanger CondenserUS$ 8000 - 25000MOQ: 1 Set
-
Automatic Tubes Cleaning System ATCS for Chiller CondenserUS$ 9000 - 25000MOQ: 1 Set
-
Automatic Tubes Cleaning System ATCS for Shell Tube Heat ExchangerUS$ 9000 - 25000MOQ: 1 Set
-
Dubai Automatic Tubes Cleaning System ATCS for Shell Tube Heat ExchangerUS$ 9000 - 25000MOQ: 1 Set
-
Istanbul Automatic Tubes Cleaning System ATCS for Chiller CondenserUS$ 9000 - 25000MOQ: 1 Set
-
EQOBRUSH Automatic Tubes Cleaning System ATCS for Shell Tube Heat ExchangerUS$ 9000 - 25000MOQ: 1 Set
-
Taipei Automatic Tubes Cleaning System ATCS for Chiller CondenserUS$ 9000 - 25000MOQ: 1 Set
-
Doha Automatic Tubes Cleaning System ATCS for Shell Tube Heat ExchangerUS$ 9000 - 25000MOQ: 1 Set
