Contact Platform Support
Help CenterPolyamide PA Nucleating Agent P22 by Bruggeman, a White Powder, Improves Demolding. BRUGGOLEN PA Nucleating Agent P22
Product Spotlights
Related Products
-
Polyester Nucleating Agent Bruggeman BRUGGOLEN P252, Which Enhances Mechanical Properties, P252 Polyester Nucleating AgentUS$ 28 - 30MOQ: 25 Kilograms -
High-temperature-resistant PROCASTER Nucleating Agent PW40 - a Composite Material With High Crystallization Rate and Excellent Thermal PropertiesUS$ 65 - 67MOQ: 25 Kilograms
-
Klein Nucleating Agent Sandostab 4030 - Highly Crystalline Amorphous Polymer - Klein Highly Efficient Nucleating AgentUS$ 50 - 52MOQ: 25 Kilograms
-
Nucleating Agent Powder, PP Polypropylene, XT386, Enhancing Rigidity and Toughness, Transparent Polypropylene Nucleating AgentUS$ 72 - 74MOQ: 25 Kilograms
-
Clariant Nucleating Agent Licomont Cav102 - Highly Efficient and Stable Nucleating AgentUS$ 43 - 45MOQ: 25 Kilograms
BRUGGOLEN P22
Nylon nucleating agent
Product description: BRUGGOLEN P22 is a fine powder mixture of organic and inorganic components.
Properties and applications: BRUGGOLEN P22 is a nucleating agent (crystallization accelerator) for various nylon (PA6, PA66, PA11, PA12, copolymer PA).
When BRUGGOLEN P22 is added to the polymer melt, the amorphous powder can easily be separated into very fine particles, and then plays a very effective nucleation role, forming a fine and uniform crystal structure.
It has the following advantages during injection molding processing:
* Shorten the molding cycle and increase productivity.
* Improve demolding.
* Improve the dimensional stability of the product.
* Reduce post-molding shrinkage.
* Prevent stress cracking of the product.
* Improve mechanical properties (increase tensile strength and hardness).
These improved properties exist not only in un-reinforced nylon, but also in reinforced nylon, and are particularly suitable for glass fiber reinforced nylon. The reason for these effects is that it can form a more fine and uniform crystal structure in the nylon matrix compared to glass fibers.
Dosage amount: The optimal dosage for BRUGGOLEN P22 is approximately 0.05 - 0.3%, and the exact dosage depends on the volume of the nylon and the desired properties of the final product.
Processing method: The best way to add is by using a twin-screw extruder for blending.
It is also possible to mix the additive with the polymer particles evenly through a dry-mixing method. During dry-mixing, a bonding oil such as 0.2% BRUGGOLEN P60 should be used.
To achieve the best processing conditions and product properties, it is recommended to use an appropriate lubricant in addition, such as 0.2 - 0.4% BRUGGOLEN P12. This is especially useful in glass-reinforced nylon, as it can prevent processing problems and achieve excellent surface gloss of the product.
Please pay attention to our technical information: Addition methods and product forms.
Packaging: 25-kilogram cardboard boxes, with PE plastic bags as inner packaging.
Send Inquiry to This Supplier
You May Also Like
-
Milliken Nucleating Agent HPN-20E for Polyethylene PP Injection Molding to Enhance Rigidity and Transparency; PLA Nucleating AgentUS$ 63 - 65MOQ: 25 Kilograms
-
Milekonicant HPN-68L for Polypropylene, an Extrusion Injection Molding and Compression Molding Nucleating AgentUS$ 59 - 61MOQ: 25 Kilograms
-
Milliken 715 Nucleating Agent Hyperform - Highly Transparent, With Enhanced Light Transmission and RigidityUS$ 49 - 51MOQ: 25 Kilograms
-
BASF Transparent Nucleating Agent IrgaclearD Polypropylene (PP) Transparentizer Increases Rigidity BASF Nucleating AgentUS$ 49 - 51MOQ: 25 Kilograms
-
Collophane Nucleating Agent Licomont NaV101 Polyester PET Engineering Plastic N101 Polyamide PA Nucleating AgentUS$ 43 - 45MOQ: 25 Kilograms
-
Transparent PP Nucleating Agent, High Purity Clarifying Agent for Polypropylene Plastic Sheet & FilmUS$ 40 - 46MOQ: 25 Kilograms
-
PP Nucleating Agent Additive, High Clarity Polypropylene Nucleating Agent for Plastic Packaging & MoldingUS$ 40 - 46MOQ: 25 Kilograms
-
PE Polymer Nucleating Agent, High Performance Nucleating Additive for PE Film & Pipe ProductionUS$ 17 - 21MOQ: 25 Kilograms
-
PA Nylon Nucleating Agent, Industrial Grade Polymer Nucleating Additive for Enhanced CrystallizationUS$ 17 - 21MOQ: 25 Kilograms
-
High Purity Nucleating Agent, Food Contact Grade Polymer Additive for Transparent Plastic ProductsUS$ 17 - 21MOQ: 25 Kilograms
