Green Low VOC PU Sealant Ground Settlement Adaptable for Basement External Wall Leakage Repair
Product Spotlights
This single-component moisture-curing polyurethane (PU) sealant is a solvent-free, environmentally friendly sealing material tailored for indoor and outdoor structural gap treatment. Unlike silicone sealants with weak paint compatibility, this PU sealant supports overcoating with all types of water-based and oil-based paints after full curing, solving the common repainting dilemma for construction gaps. It achieves initial curing within 2 hours at 23℃ and 50% relative humidity, and complete deep curing within 72 hours, with stable performance across -40℃ to 90℃ extreme temperature fluctuations. It delivers robust bonding performance on diversified substrates including concrete, aluminum alloy, galvanized steel, PVC, wood and stone, with no primer needed for over 90% of conventional building materials, cutting on-site construction time and auxiliary material costs. With excellent weathering and anti-aging properties, it resists long-term UV radiation, acid rain corrosion and seawater splash, avoiding cracking, yellowing or peeling within 15 years of outdoor service. Its high elongation rate of 350% enables it to absorb structural expansion, shrinkage and slight seismic displacement of buildings, effectively blocking water penetration, wind ingress and dust infiltration. It is widely used in expansion joints of concrete roads, curtain wall side gaps, automotive body welding seams, container edge sealing and prefabricated building assembly gaps. For construction precautions, users must clean substrate surfaces of dust, oil and loose residues before application; low humidity below 30% will slow curing speed, so humidifying the construction surface is recommended in dry seasons. Free of formaldehyde and toxic volatile organic compounds, it complies with EU REACH environmental standards, suitable for residential, commercial and marine engineering scenarios
Send Inquiry to This Supplier
You May Also Like
-
Two-component Polyurethane Building Sealant, Two-component Waterstop Sealant, High Modulus Polysulfide Joint Sealant, Complete SpecificationsUS$ 3.8 - 4.9MOQ: 49 Units
-
Two-component Polysulfide Sealant, One-component Polyurethane Sealing Paste, Water-swellable Waterstop SealantUS$ 3.8 - 4.9MOQ: 49 Units
-
High and Low Modulus Two-component Polysulfide Sealant, Polyurethane Sealing Paste, Building Waterproof Adhesive, Strong Bonding and Good ToughnessUS$ 3.8 - 4.9MOQ: 49 Units
-
Two-component Polysulfide Sealant, Non-sagging AB-component Sealing Paste, 25kg/box, for Caulking in Underground ProjectsUS$ 3.8 - 4.9MOQ: 49 Units
-
Polysulfide Sealant, Two-component Sealant Paste, Polysulfide Material, Joint Sealing, 25kg/pieceUS$ 3.8 - 4.9MOQ: 49 Units
-
Two-Component Polysulfide Sealant, Waterproof Elastic Caulk for Construction Expansion Joints, Concrete Crack Filling and Building SealingUS$ 3.6 - 4.8MOQ: 49 Units
-
High Elastic Two-Part Polysulfide Sealant, Water Leakage Prevention for Basement and Tunnel Seam, Durable Anti-Corrosion Construction CaulkUS$ 3.6 - 4.8MOQ: 49 Units
-
Waterproof Two-Component Polysulfide Sealant, Hydraulic Engineering Special Caulk for Dam, Reservoir and Water Tank Joint Sealing & FillingUS$ 3.6 - 4.8MOQ: 49 Units
-
High Adhesion Two-Component Polysulfide Sealant, Stone Wall & Exterior Wall Panel Joint Sealer, Dustproof & Waterproof Construction MaterialUS$ 3.6 - 4.8MOQ: 49 Units
-
Durable Two-Part Polysulfide Sealant, Sewage Treatment Pool & Canal Joint Sealing Glue, Chemical Resistant Waterproof CaulkUS$ 3.6 - 4.8MOQ: 49 Units




