Contact Platform Support
Help CenterMaxon Ecx Flat 22 s, 4.5/9.8 w, 7.99 Mnm. Advantageous Supply of All Original Models From Switzerland and Italy
Related Products
-
Maxon Ecx Speed 13 M25/48 w, 4.9 Mnm, 120000 Rpm Brushless, Bldc MotorNegotiableMOQ: 0 Unit -
Maxon ec 22 ∅22 Mm, Brushless, 240 w. Advantageous Supply of Full Models From Original Factories in Germany, Switzerland and ItalyNegotiableMOQ: 1 Unit
-
Maxon Ecx Flat 32 s 35/50.7 w, 35 Mnm, 14000 Rpm, Advantageous Supply of All Original Swiss ModelsNegotiableMOQ: 1 Unit
-
Maxon Ecx Speed 13 M12/18 w, 4.2 Mnm, 50000 Rpm Brushless, Bldc MotorNegotiableMOQ: 0 Unit
-
Maxon Ecx Speed 10 L16/19.1 w, 3.3 Mnm, 65000 Rpm Original Full-range MotorsNegotiableMOQ: 0 Unit
ECX FLAT 22 S is a Φ22mm ultra-thin outer rotor brushless BLDC servo motor launched by Swiss maxon. It belongs to the ECX FLAT compact flat drive series. The "S" in the model represents the short body version, with a body thickness of only 14mm, achieving high power density output in a very small radial/axial installation space. It is a benchmark solution for lightweight and precise driving of narrow devices. Maxon Grou... The motor is standard equipped with a Hall sensor for precise electronic commutation, offering two power versions: a 4.5W standard power and a 17W high-torque version. It supports multiple voltage specifications of 12V/18V/24V and can be freely customized with maxon gearboxes, encoders, and built-in drive iE modules, suitable for full-scenario precise motion control of micro-automation, aviation, medical, and testing equipment.
2. Core hardware parameters
Dimensions and weight: The outer diameter is 22mm, the body length is 14mm, and the net weight of the whole machine is 28.2g. It has an ultra-thin disc-type flange structure, occupying very little installation space and offering high freedom for device integration. Maxon Grou...
Power and torque performance
Standard version 4.5W: No-load speed is 15000rpm, continuous torque is 7.99mNm
High-torque 17W model (mainstream): Multiple voltages of 12/18/24V, continuous torque is 14.9~15.5mNm, no-load speed is 12100~13300rpm. It has stable low-speed torque output and fast start-stop response. maxon Grou...
Electrical and sensing: Three-phase brushless winding, built-in Hall position sensor, supporting sine/square wave commutation; using Molex standardized terminal wiring harness, with separate wiring for motor power lines and sensor lines, ensuring stable wiring and anti-interference; Hall power supply is compatible with a wide voltage input of 3.5~24VDC. Maxon Grou...
Structural durability: Precision ball bearing design, with excellent axial and radial load tolerance; all-aluminum housing for efficient heat dissipation, with an efficiency of over 80%; brushless structure without carbon brush wear, offering a long service life, low noise, and low electromagnetic interference.
3. Core product advantages
Flat and space-saving: With a 14mm ultra-thin body and disc flange installation, the axial dimension is reduced by over 60% compared with cylindrical motors of the same power, perfectly suitable for devices with limited body thickness.
High power density and light weight. The 28g lightweight body outputs 17W of power. The outer rotor magnetic circuit is optimally designed, and the torque density far exceeds that of conventional micro brushless motors under the same volume.
Flexible modular customization. It supports the selection of planetary gearboxes, high-precision encoders, and integrated four-quadrant servo drives (iE version); the shaft diameter, flange, cable, and connector can all be customized according to requirements, with tens of thousands of combinations to meet the needs of non-standard equipment. Maxon Grou...
Stable and precise control. Hall sensors ensure accurate commutation, with small speed fluctuations and no jitter at low speeds; built-in overvoltage, undervoltage, stall, and overheat full protection circuits ensure high reliability during long-term continuous operation.
Industrial-grade reliable quality. Precision manufactured by maxon in Switzerland, all windings, magnetic steels, and bearings are strictly inspected. It is suitable for harsh working conditions in laboratories, medical, aviation, etc., with stable long-term operation consistency.
IV. Typical application scenarios
Medical equipment: Micro surgical instruments, biochemical analyzers, portable detection instruments
Industrial automation: Micro pan-tilt heads, precision indexing mechanisms, small pump valves, optical lens focusing drives
Aviation drones: Power for small aerial photography drones, micro servo motors, airborne precision actuators
Office/detection equipment: Micro printers, spectral detection equipment, micro feed axes for 3D printing
Robots: Micro joints, end-effectors of collaborative robots
V. Supporting expansion solutions
ECX FLAT 22 S can be fully matched with maxon's supporting transmission and control components to form an integrated drive system:
Deceleration: GP series micro planetary gearboxes to achieve high-torque low-speed output;
Feedback: Micro incremental/absolute encoders for closed-loop precise positioning;
Drive: Built-in iE integrated drive version with 4-channel IO and four-quadrant speed regulation, no external controller required;
Control: Matched with ESCON series servo drives, supporting host computer bus control.
Supply consultation channels
Shanghai Detuo Intelligent Engineering Co., Ltd. Sales Manager:
Du Zhihong Contact phone number: 13042119416
Business contact email: duzhihong@daitto.com
Send Inquiry to This Supplier
You May Also Like
-
Maxonre 30 ∅30 Mm, Graphite Brushes, 60 w. Original Products From Germany, Switzerland, and Italy. All Models Are Available With Preferential Supply.NegotiableMOQ: 1 Unit
-
Maxon Re35 ∅35mm, Advantageously Supply Full Models of Original dc Motors From Germany, Switzerland, and ItalyNegotiableMOQ: 0 Unit
-
Maxonre 40 ∅40 Mm, Rare Metal Brushes, 25 w. Advantageous Supply of All Models of Motors From the Original Swiss FactoryNegotiableMOQ: 0 Unit
-
Maxon Ecx Speed 4 m ∅4 Mm, Brushless, Bldc Motors. Advantageous Supply of German and Swiss dc MotorsNegotiableMOQ: 0 Unit
-
Maxon Motors, Maxon re 65, ∅65 Mm, Graphite Brushes, Advantageously Supplying All Models of Motors From Switzerland and GermanyNegotiableMOQ: 0 Unit
-
Maxonre 50 ∅50 Mm, Graphite Brushes, 200 w. Advantageous Supply of Motors in All Models From Original Swiss and German FactoriesNegotiableMOQ: 0 Unit
-
Maxon Ecx Speed 4 l ∅4 Mm, Brushless, Bldc Motor. Original Swiss Motors With Advantageous SupplyNegotiableMOQ: 0 Unit
-
Maxon Motor re 30 ∅30 Mm, Graphite Brushes, 60 w, Advantageously Supplied From Original Swiss ManufacturerNegotiableMOQ: 0 Unit
-
Maxon Motor Maxonecx Speed 8 m ∅8 Mm, Brushless, Bldc Motor 2/4.7 wNegotiableMOQ: 0 Unit
-
Maxon Motor Maxonecx Speed 6 m: 2/4 w, 0.42 Mnm, 100000 RpmNegotiableMOQ: 0 Unit
