Ground Source Heat Pump Air Conditioning System
Specifications
1)Use world famous twin-screw compressor2)Noise seal
3)Use famous Control device
4)Used for long time
5)large application
ground source heat pump air conditioning system(flooded type)
Heating capacity: 247~3600kw
Cooling capacity: 260~3805kw
Compressor Brand: American Copeland ((or other brand as per request))
Power: 3/N/PE AC380V/220V 50HZ (can be changed as per request)
Refrigerant: Environmental protection refrigerants (selected by requirement)
Competitive Advantage:
1. Use of flooded evaporator compared with the dry evaporator, COP increased by 1.5. The latest threads and efficient heat exchange, heat transfer coefficient of heat exchange tubes of 1.3 times normal.
2. used soil as air conditioning and heat source, for the radiant floor, radiator, fan coil units and other end of the form of heating, cooling, sea can demand, preparation free water.
3. A 5:6 tooth gear design in the world famous twin-screw compressor, small vibration, low failure rate, advanced energy control method can achieve a paragraph or unwarranted energy regulation.
4. Injection compression, noise seal.
5. Control device using the world famous, PID regulation.
6. Completely eliminate the stuck rotor or motor overheating high temperature and low pressure exhaust temperature monitor and control access to water, water, antifreeze, water temperature and other multi-protection, to ensure the safe operation of generating units.
7. Large-screen color touch screen has the status display, parameter setting, energy control, fault diagnosis and control of such a multi-function, convenient man-machine dialogue. Comes with RS485 communication port.
8. Optimal design can improve a wider range of cooling capacity.Part load performance is good.
9. New electronic throttle device, the processing of achieving the control. Part of the load, the double-press alternately run and longer life.
10. Large range of application: Hotels, restaurants, hospitals, office buildings, theaters, stadiums, residential quarters, textile, food, medicine, metallurgy, chemicals and boiler works etc.
Notes:
1.Unit cooling capacity and compressor power consumption Calibration conditions
chilled water inlet temperature 12°C, outlet water temperature 7°C
Cooling water inlet temperature 18°C, outlet water temperature is 29°C.
2. Unit heating capacity and compressor power consumption calibration conditions
hot water inlet temperature 40°C, water temperature 45°C
Cooling water inlet temperature 15°C, outlet water temperature 7°C.
3. When the cooling water temperature range is different from the calibrate mode, press the design performance curves to select their unit refrigeration / heat and power consumption.
Send Inquiry to This Supplier
You May Also Like
-
Air Flow 6000M3/H Portable Air Cooler Air CoolerNegotiableMOQ: 1 Set
-
Fiberglass Reinforced Plastic Air Ducts, Inorganic Fiberglass Reinforced Plastic Air Channels, Organic Fiberglass Reinforced Plastic Ventilation DuctsUS$ 24.62 - 27.69MOQ: 1 Meter
-
4-way Cassette Fan Coil UnitNegotiableMOQ: 1 Piece
-
Industrial Air Conditioner and Air Conditioning System Manufacturer in ChinaNegotiableMOQ: 10 Sets
-
Industrial Air ConditionerNegotiableMOQ: 1000 Sets
-
APP Control Mist Free Humidifier,0 Fog Ultrasonic Humidifier,Evaporative Humidifier/demineralizerNegotiableMOQ: 1000 Pieces
-
Cutting Tools Kit With Aluminum Carrying Case For Phenolic Foam Insulation Sheet Board Duct Good PriceNegotiableMOQ: 1
-
Small Steel Hatch Cover Easily Operating Experienced ManufacturerUS$ 0.5 - 11.9MOQ: 500 Pieces
-
Class 100 Cleaniness FFU With Low Noise for Ultra-clean SpaceUS$ 1 - 1MOQ: 1 Set
-
Mini Air ConditionNegotiableMOQ: 1000 Pieces