Contact Platform Support
Help CenterP Type Prestressed Holding End Anchorage High Quality
Related Products
-
Prestressed Multihole Anchorage for Concrete ConstructionUS$ 25 - 100MOQ: 100 Sets -
Prestressed Anchor Head China Famous BrandUS$ 3 - 100MOQ: 100 Sets
-
Prestressed and Post Tensioning Clips China Famous BrandUS$ 0.5 - 2.5MOQ: 100 Pairs
-
Prestressed Anchorage China Famous BrandUS$ 25 - 100MOQ: 100 Sets
-
Anchor Plate New ProductUS$ 0.1 - 10MOQ: 100 Sets
YJM 13/15 Holding System P Type anchor System
P Type anchor is composed of a Barrel and inner spring made by copper wires.Through pressing the Barrel, the wires will be fixed on anchor plate,certainly the spiral bar,binding ring and corrugated pipe are also needed in the type anchor system.The pressing task is to completed by GYJA extruder.
Application:
It has been widely adopted by Bridge and Road construction ,and modern construction, especially used in post-tension for concrete constructions as building materials.
INSTRUCTIONS:
1 YM anchorage must be used with YM working wedge, and YM tool anchorage must be used with YM tool wedge.
2 Work anchorage can't substitute for tool anchorage.
3 YM series anchorage must be used with the same specification located plates of YM.
4 Anchorage must be well keeped to prevent rusting and dirts. Before installation, rusting and dirts must be cleand to prevent from damaging the internal thread of wedge which will fill in the alveolar of wedge when tension.
5 When install anchorage, O Dia of Anchor Head should put in hole of Anchor Bearing Plate, and the restraing plate must in the same direction with the hole of tool anchorage, and the strands cannot be twined around each other and dislocated.
Send Inquiry to This Supplier
You May Also Like
-
Cast Iron Trench Drain Cover, 1/2" Thick, Load Class E600, 24"x12" Solid Grate for Industrial UseNegotiableMOQ: 300 Square Meters
-
HPL Panel (clean Room)NegotiableMOQ: 100 Square Meters
-
SOURCE POLYURETHANE SANDWICH PANEL FactoryNegotiableMOQ: 100 Pieces
-
Press Locked Steel Grating, 40x40mm Aperture, 5mm Flat Bar, Load Capacity 4kN/m², Standard CompliantNegotiableMOQ: 50 Cubic Centimeters
-
for Industrial Warehouse Cladding: Galvanized Metal Wall Panel, Wind Load up to 150km/hNegotiableMOQ: 1 Square Meter
-
Ex-factory Price Q195 Q235 AiSi ASTM Hot Rolled 1.5mm 1.6mm Low Carbon Steel Coil Modern Durable Boiler Plate Welding CuttingNegotiableMOQ: 1 Ton
-
Hot Dipped Galvanized Diamond Metal Lath Expanded 2-1/2-gauge Steel Sheet Anti-Corrosion Durable Low Cost Roofing Wall FloorUS$ 1.7 - 3.2MOQ: 1 Piece
-
High Purity Zirconia Ceramic Ring 8mm OD With 1500 MPa Flexural Strength for Valve SealsNegotiableMOQ: 1 Piece
-
Sandwich PanelNegotiableMOQ: 2500 Pieces
-
pu Wall Sandwich Panel Rigid Insulation Polyurethane Foam BoardNegotiableMOQ: 1
