Contact Platform Support
Help CenterExpanded PTFE Joint Sealant Tape
Related Products
-
Expanded PTFE Joint SealantUS$ 10 - 30MOQ: 200 Kilograms -
Expanded Ptfe Sealing Joint 3mm x 1.5mm x 50mUS$ 10 - 30MOQ: 200 Kilograms
-
PTFE Joint Sealant TapeUS$ 10 - 30MOQ: 200 Kilograms
-
Ptfe SoakedNegotiableMOQ: 50 Kilograms
-
Various Fillers of PTFE Products /PTFE Filled Goods China ManufacturerUS$ 8 - 16MOQ: 100 Kilograms
Expanded PTFE Joint Sealant Tape
1. Description
Made of pure Expanded PTFE, widely used in the transport and sealing of industrial fluids. It is the most cost-effective alternative to sheet gasketing for large equipment flanges. Because it is a form-in-place gasket, so it nearly can be used in any sealing surface. Especially for the irregularities and damaged flange surface, Expanded PTFE joint is the best choice.
2. Advantage:
Easy to install
Low stress-to-seal
Can conform to any surface, including rough, pitted, scratched and damaged surfaces.
Resistant to creep and cold flow
100% expanded PTFE, has the same chemical inertness of pure virgin PTFE.
Unlimited Shelf Life
Over compression is no problem
3. Technical Data:
Temperature: -100°C ~ 280°C
Pressure: 20Mpa(fluid); 14Mpa(gases)
PH range: 0 ~ 14
Tensile Strength: ≤ 8 Mpa
Compressibility: 55% ~ 80%
Creep relaxation: ≤ 40%
4. Offer Size:
Width:3 ~ 100mm
Thickness: 1 ~ 10mm
Length: 3 ~ 30m
5. Applications:
PTFE Joint Sealant is especially suite d for sealing flange connections, pipe systems, hydraulic and pneumatic systems, etc. In addition, it’s also ideal for seals in glass, enamel and plastic flanges, vessels and special shaped sealing surface.
PTFE Joint Sealant saves money and time. Since there is no scrap or waste, it costs less than other gasket materials. By using only a few sizes, large inventories of sheet gasketing and costly precut gaskets can be eliminated. Installation time is kept to a minimum since there are no templates, precutting or special fitting requirements.
6 Photos:
Send Inquiry to This Supplier
You May Also Like
-
GPPS PG-33 Polystyrene Resin With High Flowability for Injection MoldingUS$ 1 - 1.02MOQ: 1 Kilogram
-
940NC Polycarbonate Raw Material, Flame Retardant V-0 Grade for Electrical ComponentsNegotiableMOQ: 1 Kilogram
-
POM K300 Plastic Granules 1.5% Shrinkage Rate 80 Shore D Hardness Stable Injection Molding PerformanceNegotiableMOQ: 1 Kilogram
-
SK Global Chemical YUPLENE BX3800 High‑Crystalline Impact Copolymer PP Injection Molding PelletsNegotiableMOQ: 25 Kilograms
-
PTFE Fine Powder for Paste Extrusion With Particle Size D50 400-575μmUS$ 10 - 30MOQ: 100 Kilograms
-
Polymers & ResinsNegotiableMOQ: 2000 Bags
-
Economic Interlocking Horse and Cow Stable Mat Made of Rubber or EVAUS$ 13.5 - 35.4MOQ: 100 Pieces
-
SAP Super Absorbent Polymer for Sanitary Napkins or DiapersUS$ 1.5 - 2MOQ: 1000 Kilograms
-
Slip Additive Masterbatch With PE CarrierUS$ 2.3 - 2.5MOQ: 500 Kilograms
-
UHMW PE Powder for Lead-acid Battery SeparatorUS$ 2,750 - 2,850MOQ: 1 Ton
